|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
FS: BMS 10mm and 15mm spacers
|
|
01-05-2013, 07:24 PM | #1 |
Private
0
Rep 50
Posts |
FS: BMS 15mm spacers SOLD
Update: 10mm and 15mm spacers sold. Hi all, Got these spacers from a friend who was running them on his 535. Never installed them on my 335, and now am finally getting around to cleaning my garage. When the shop pulled them off his car, they marred up a few of them. I think it could easily be fixed with some creative smoothing (sanding, etc), or honestly could probably be run as is. Pictures included below. Please don't hesitate to ask me any questions. -Chris
__________________
2010 335i - JB4, BMS DCI, BMS AE's, CF Wrapped Interior Last edited by humbucker87; 01-21-2013 at 08:27 PM.. |
01-05-2013, 08:15 PM | #3 |
Private
0
Rep 50
Posts |
Yeah unfortunately they must have been impatient or something. I find it hard to imagine that some pb blaster and waiting couldn't have saved them.
I'm honestly not sure if they'll sit completely flush or not, but I imagine maybe some rough sand paper or a dremel could smooth them out easily. I would do half ($60) for just the 10mm's and then shipping would be less too. Let me know if you would like additional pictures, etc.
__________________
2010 335i - JB4, BMS DCI, BMS AE's, CF Wrapped Interior |
Appreciate
0
|
01-07-2013, 01:29 AM | #4 |
Captain
130
Rep 775
Posts
Drives: 2007 E90 328i
Join Date: Mar 2012
Location: SoCal
|
Do you still have the 10mm available? Thanks!
__________________
Performance Mods: ST Coilovers | R1 Concepts Premier Rotors w/Hawk HPS Pads | ECS Stainless Steel Brake Lines | OEM 219M Wheels | Bridgestone Potenza RE760 | Precision Euro Spacers | AA Race Headers | AFE Race Midpipes | Remus Powersound Quad Exhaust | AA Offroad Tune | RevMotoring Intake Pipe | Cyba Scoops
|
Appreciate
0
|
01-08-2013, 06:42 PM | #5 |
Private
0
Rep 50
Posts |
Bump.
Price drop to $100 for both sets shipped on the east coast or $110 shipped to the west coast.
__________________
2010 335i - JB4, BMS DCI, BMS AE's, CF Wrapped Interior |
Appreciate
0
|
01-10-2013, 02:20 PM | #7 |
Private
0
Rep 50
Posts |
Correct, I'm not 100% that they'll sit flush. Maybe I'll take better pictures when I get home. Thinking about it, however, if anything they were probably deformed away from the wheel hub and so it may not even matter.
Again, I think I need to look at them again and maybe take pictures at different angles. Let me know if you have any other questions.
__________________
2010 335i - JB4, BMS DCI, BMS AE's, CF Wrapped Interior |
Appreciate
0
|
01-18-2013, 07:52 AM | #9 |
Private
0
Rep 50
Posts |
Bump. 10mm spacers sold.
15mm still available. $60 shipped. As far as I can tell they should sit on the hub flush. My method of testing was that they sit flush on eachother. Any questions, feel free to PM me.
__________________
2010 335i - JB4, BMS DCI, BMS AE's, CF Wrapped Interior |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|