[PichaDis11]

Anyone got this working with the NFRM module?

[Raptor04]

anyone gotten only the 3rd brake light to blink?

[cuco]

I was able to activate BFD with my FRM2 module, I did the coding in NCS but also added the BFD option in my FA. Check post #82, there's all I did to get this working

[joepcrepairs2]

i was able to finaly find out how to make the rear fog lights blink fast like the one on this video showing here:

the values you need to change on your daten file are the following:

PARZUWEISUNG_FSW : {0000340F} 00000009 0001 06B5 {} (0F) {h} {} // BFD_2_BLINK_FREQ_AUS
PARZUWEISUNG_PSW1 : 0007 (01) // wert_01
PARZUWEISUNG_FSW : {0000340F} 00000009 0001 06B6 {} (F0) {h} {} // BFD_2_BLINK_FREQ_EIN




so pretty much BFD_2_BLINK_FREQ_EIN and BFD_2_BLINK_FREQ_AUS

change the value on this 2 to 01


flashing frequency:

00=3hz
01=5hz


oh and also you need to set some values to nicht_aktiv and wert 03

below im posting a copy of my trc file and also of my dissambled FRMFA.C21 daten file



NOTE: I WAS ABLE TO ENABLE THIS ON FRM MODULE ON A 2007 BMW 335I E92

[joepcrepairs2]

this was before
now they flash faster after changing those values

[E30 Racer]

Would you please post a video of your lights set to 5 Hz? Surprised to hear it works for non-LCI tail lights (not LED).

[joepcrepairs2]

Originally Posted by E30 Racer

Would you please post a video of your lights set to 5 Hz? Surprised to hear it works for non-LCI tail lights (not LED).

video coming soon ill post it up today

[joepcrepairs2]

this are the values you need to modifi on your daten file ..
on the pic below i already change mine to (01) default value is 05 so like i mention before

blinking frequency:

05=default value
00= 3Hz
01=5Hz

[joepcrepairs2]

heres the video.. ill try to make one at night when more visible

[1QuikWS6]

So after 6 pages of doing this or that, & conflicting info to get them to work - can we get a summation of exactly what is required to do for NFRM2 cars to get this to work all in one post?

If we could get all the specific coding line changes + Daten changes for blink speed + whether or not the need to add $5AB into VO all in one place for each option:

• Flashing 3rd Brake Light Only
• Flashing 3rd Brake Light + Flashing Rear Fogs

It sure would be helpful

[joepcrepairs2]

Originally Posted by 1QuikWS6

So after 6 pages of doing this or that, & conflicting info to get them to work - can we get a summation of exactly what is required to do for NFRM2 cars to get this to work all in one post?

If we could get all the specific coding line changes + Daten changes for blink speed + whether or not the need to add $5AB into VO all in one place for each option:

• Flashing 3rd Brake Light Only
• Flashing 3rd Brake Light + Flashing Rear Fogs

It sure would be helpful

i asked many people how to get this to work at the begining , and noone seem to know /or wanted to share how to.. i discover it how to do it my own. . should be the same process for frm2 jusst find the line that i needs to be edit it on your daten file and change the values i already posted on earlier post.. and your good to go

[joepcrepairs2]

this should work for frm2


BFD2_AKTIV : set to aktiv


now choose whatever you want to enable as brake force dispay

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS

so whatever you want to blink set them to :
blinkend = blinking

now for the binking freqquency if you want them to blink fast or slow

set this value to whatever blinking frequency you want

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz
5Hertz(fast)=5_hz

[1QuikWS6]

Originally Posted by *************

this should work for frm2


BFD2_AKTIV : set to aktiv


now choose whatever you want to enable as brake force dispay

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS

so whatever you want to blink set them to :
blinkend = blinking

now for the binking freqquency if you want them to blink fast or slow

set this value to whatever blinking frequency you want

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz
5Hertz(fast)=5_hz

Most excellent - Thanx!

I will give it a shot during my next coding opportunity

[Wycy]

Originally Posted by *************

heres the video.. ill try to make one at night when more visible

Does this make your headlights flash too, or is that just an artifact of filming?

Also, I'd still be interested in a single post that succinctly sums up everything in this thread. Post #122 is good, but as far as I can tell it's missing the daten modification step/s. Or is daten modification not required for NFRM2?

[joepcrepairs2]

Originally Posted by Wycy

Does this make your headlights flash too, or is that just an artifact of filming?

Also, I'd still be interested in a single post that succinctly sums up everything in this thread. Post #122 is good, but as far as I can tell it's missing the daten modification step/s. Or is daten modification not required for NFRM2?

no headlightz flashing or anything lol it looks like theyre flashing on the vid cUse everytime you record your car thats how it looks.. specially the angel lights...

ill do a step by step soon

[sono0312]

Originally Posted by *************

this should work for frm2


BFD2_AKTIV : set to aktiv


now choose whatever you want to enable as brake force dispay

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS

so whatever you want to blink set them to :
blinkend = blinking

now for the binking freqquency if you want them to blink fast or slow

set this value to whatever blinking frequency you want

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz
5Hertz(fast)=5_hz

thanks for this info. i was eager to have this done. I tried doing it according to your instruction as above; but it does not work...

i speeded up more than 5m/s with ABS activated and braked but unable to get any difference from original brake light. Anything needs to be changed apart from ones described here?

[joepcrepairs2]

Originally Posted by sono0312

thanks for this info. i was eager to have this done. I tried doing it according to your instruction as above; but it does not work...

i speeded up more than 5m/s with ABS activated and braked but unable to get any difference from original brake light. Anything needs to be changed apart from ones described here?

forgot to add this too you set this to aktiv

BFD_2_ALGORITHMUS - BRAKE FORCE DISPLAY STAGE 2 :note this is for frm1 set to aktiv
__________________________________________

BFD2_AKTIV : this is for frm2 set to aktiv

[sono0312]

Originally Posted by *************

forgot to add this too you set this to aktiv

BFD_2_ALGORITHMUS - BRAKE FORCE DISPLAY STAGE 2 :note this is for frm1 set to aktiv
__________________________________________

BFD2_AKTIV : this is for frm2 set to aktiv

thanks for the advice. my car has now FRM2 embedded; therfore, I have set the following parameters according to your instruction...

BFD2_AKTIV
=aktiv

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS
= blinkend

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz

i wonder if the following settings are needed in addition to above?

BFD2_ESS_ANZEIGE
aktiv
BFD2_ESS_ENABLE
aktiv
BFD2_BFD
blinkend
BFD2_SL_BL_1
blinkend

[joepcrepairs2]

post a copy of your .trc file so i can check it out

[joepcrepairs2]

Originally Posted by sono0312

thanks for the advice. my car has now FRM2 embedded; therfore, I have set the following parameters according to your instruction...

BFD2_AKTIV
=aktiv

BFD2_BL_M - BRAKE FORCE DISPLAY WITH THIRD BRAKE LIGHT
BFD2_NSL - BRAKE FORCE DISPLAY WITH REAR FOG LIGHTS
BFD2_BL - BRAKE FORCE DISPLAY WITH BRAKE LIGHTS
= blinkend

BFD2_BLINKEN - BRAKE FORCE DISPLAY FLASHING
3Herts(slow) = 3_hz

i wonder if the following settings are needed in addition to above?

BFD2_ESS_ANZEIGE
aktiv
BFD2_ESS_ENABLE
aktiv
BFD2_BFD
blinkend
BFD2_SL_BL_1
blinkend

post a copy of your .trc so i can look at it

[sono0312]

Originally Posted by *************

post a copy of your .trc so i can look at it

here is my trc. thanks!

[joepcrepairs2]

Originally Posted by sono0312

here is my trc. thanks!

this to aktiv:
BFD_1_ALGORITHMUS

this to wert01
BFD_1_MIT_NSL