[bmw325i]

BIMMERPOST / Classifieds

Asking Price:

USD 15.00

Or Best Offer

Shipping Costs Included

Item Interest

I have a harness I made that allows you to add a pair of rca outputs to your stock headunit. I made this using part of the Metra harness and JL audio speaker wire to rca adapters. Everything is soldered and covered in heatshrink.

You must already have hifi or you'll need to recode your headunit to hifi, visit the coding section for more info. For those with logic 7 and an aftermarket sound system, this will allow you to remove the logic 7 amp and instead connect your aftermarket equipment to the stock headunit directly. This harness only uses the front outputs as I was using it with an MS8. I will include a Kicker twisted pair RCA cable with it. It connects to the stock quadralock connector behind the head unit. $15 shipped + paypal fees.

[bmw325i]

Bump. Anyone need this?

[bmw325i]

Bump.

[jflow326]

Me likey

[big_ed]

What about the rear channels.....!? You don't have anything that will connect all channels to my after market amp?

[bmw325i]

Originally Posted by big_ed

What about the rear channels.....!? You don't have anything that will connect all channels to my after market amp?

I was using this with an MS8 so only the front channels were needed. You could easily make one that has all 4 channels though.

[bmw325i]

Originally Posted by big_ed

What about the rear channels.....!? You don't have anything that will connect all channels to my after market amp?

Also if you used an xd600/6 you can use it on 2 channel input mode.