|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
No sound, sos mulf.no red signal at fiber optic end
|
|
07-29-2015, 07:00 AM | #1 |
Private First Class
30
Rep 148
Posts |
No sound, sos mulf.no red signal at fiber optic end
Hey guys.
I own a 2007 bmw 328i wagon with logic 7 and I-drive. Last night came home, everything was fine 2 hours after I went out car has no sound. SOS Malfunction came on as well When you go into entertainment you cant access the Sat radio, and also the menu is kind of blank in that window. When I go into Communication menu It wont pick up my phone. At this point I checked: AMPlifier is dry, was replaced 2 months ago. Checked all the connections, they seem good. I also check the fiber optic signal(Red light) I don't seem to be getting it at all at Sat module or TCU module. I do get 3 flashes at the amp and then the red light goes off. At this point it feels like there is a malfunction in the most bus system Anybody had this happen before? What else to check for thanks |
07-31-2015, 11:32 AM | #3 |
Lieutenant General
1911
Rep 13,103
Posts |
To isolate the problem some use a most jumper
To isolate the problem some use a most jumper
to bypass modules till the sound comes back or some of the errors go away. If the problem comes from the head unit this will not work as it the way the most bus communicates with the rest of the car. (at least this is the way it looks from the entertainment pdf and bus diagrams) Last edited by ctuna; 07-31-2015 at 01:52 PM.. |
Appreciate
0
|
07-31-2015, 01:03 PM | #4 |
Captain
238
Rep 947
Posts |
Sounds like your SAT module is bad.
You can try removing the SAT module from the MOST loop and rejoining the fiber optic cables. You can literally just hold the 2 ends of the fiber optic cable together to complete the loop. If sound is restored, you know the SAT module is indeed the culprit. |
Appreciate
0
|
07-31-2015, 02:22 PM | #5 | |
Private First Class
30
Rep 148
Posts |
I Can try that tonight, but I am not getting redlight in the sat module fiber optic connector that goes into sat module.I am guessing its because the loop circuit is broken...
Quote:
|
|
Appreciate
0
|
07-31-2015, 06:05 PM | #7 | |
Private First Class
30
Rep 148
Posts |
Quote:
When I unlock the car and it has to boot up, it will flash at amp 3 times(the fiber optic connector), and then light disappears./. no light or flash anywhere else |
|
Appreciate
0
|
Bookmarks |
|
|