[Jonmartin]

Originally Posted by zenmaster

I'd equate it to PROcede v2.0.2 90% default settings, but with about 15ft-lbs more of torque.

LOL somebody is waaaaaaaaaaay off...

Well since they tested it on a dynapack I'd compare it to procede vs 1.4 since when I went to Church Automotive on their dynopack a stock 335 mad like 300whp/339wtq on their dynapack and with my procede v1.4 I made 342whp/406wtq so these numbers aren't really anything to be excited about I'd love to see teh Mustang Dyno numbers though.

[AU335]

Originally Posted by down4it

I should go dyno my car on Dinan's Dyno! I would probably come out with like 520whp

true! I know different dynos read higher/lower than others, but i have NEVER seen any dyno ,other than this one, showing a stock 335i produce 296whp. Maybe im wrong, if i am, i will stand corrected

[ArmyBimmerDude]

Originally Posted by scalbert

It is called Microsoft Excel.

[Mr. 5]

I wish I could have this software flashed on my ecu for a couple days to test it out on the same dyno as I did with all of the other tuners. It would also be nice to get a completely objective point of view regarding the drivability.

How about a trial flash?

[BoostedBMW]

Originally Posted by ArmyBimmerDude

You just volunteer? Go Boosted! Good luck brotha

Maybe some other time.

[DrDomer]

I don't have a problem with $2000 for the tune with warranty intact. Not to mention it adjusts water pump flow rate (if this is really important, I don't have a clue). The problem is the best numbers were with exhaust, which we don't know the price yet. Also, $2000 for an oil cooler.. HOLY CRAP! There's no install with that yet either... so $2700. Those of us who have an earlier production AT sport package don't have an oil cooler.. so you're talking near $5K!!! Wow.

[T Bone]

I think we will all know where Dinan stands when it runs against a Procede 1.47 or a SSTT.....

Agreed?

Who is going to get the Dinan??

[BoostedBMW]

Originally Posted by DrDomer

I don't have a problem with $2000 for the tune with warranty intact. Not to mention it adjusts water pump flow rate (if this is really important, I don't have a clue). The problem is the best numbers were with exhaust, which we don't know the price yet. Also, $2000 for an oil cooler.. HOLY CRAP! There's no install with that yet either... so $2700. Those of us who have an earlier production AT sport package don't have an oil cooler.. so you're talking near $5K!!! Wow.

For the most part, and exhaust is an exhaust from a performance standpoint. Almost all of the aftermarket options that are full catbacks are 2.5", remove the secondary cats, and have less kinks/bends than stock. You will get most of your gains from removing the secondary cats so you won't be stuck with going with a dinan exhaust if you didn't want to.

[1clean335i]

good stuff

[jpsimon]

yes but the thing is, if you don't get the dinan exhaust they can void your dinan warranty

Originally Posted by BoostedBMW

For the most part, and exhaust is an exhaust from a performance standpoint. Almost all of the aftermarket options that are full catbacks are 2.5", remove the secondary cats, and have less kinks/bends than stock. You will get most of your gains from removing the secondary cats so you won't be stuck with going with a dinan exhaust if you didn't want to.

[BoostedBMW]

Originally Posted by jpsimon

yes but the thing is, if you don't get the dinan exhaust they can void your dinan warranty

Are you serious? That would be the dumbest thing I have ever heard. Sounds worse than factory warranty claims with mods.

[jpsimon]

Originally Posted by BoostedBMW

Are you serious? That would be the dumbest thing I have ever heard. Sounds worse than factory warranty claims with mods.

The same people willing to spend $2000 for a moderate flash that you can't even custom tune.... will be the same people ready to dish out money for an over priced dinan exhaust too

[revah2]

From what I understand those of us with a manual car with the oil cooler don't need to upgrade the oil cooler (even though its recommended) quote on quote.
Secondly at 4300 RPM and 13.2 psi of boost there is a 71 rwhp horsepower gain from the Dinan software as opposed to stock.
Interesting...

[adc]

Originally Posted by sflgator

Why should Dinan get "preferential" treatment?

Do you mean, you should go right ahead and as a welcome gift, treat them like dirt? Way to go...

The other guy just asked to refrain from sarcasm as long as the Dinan rep keeps it shiny. You can question all you want, but be civil about it.

[e90AW335i]

Originally Posted by Brisk

ill call it first... 50 page thread.. ill get the beer and popcorn.

Nice.....

[M4TW]

3 questions:

Is there package pricing if you get the exhaust and the flash?

Will the exhaust work on a 335xi?

Canadian pricing?

[thw420]

Originally Posted by AU335

true! I know different dynos read higher/lower than others, but i have NEVER seen any dyno ,other than this one, showing a stock 335i produce 296whp. Maybe im wrong, if i am, i will stand corrected

I'm pretty sure one of the major magazines did a dyno (of a second 335i because they couldn't belive the 1st one's high #'s) and on the last dyno attempt they got 299whp. So I'm sure it's possible.

[T Bone]

Please vote:

Poll being set up now...I made a mistake and missing Procede....

[adc]

I find the water pump remapping extremely interesting... for anyone who plans on keeping the car a little longer...

Now that I know it can be done, how about someone else providing a little waterpump piggyback to go hand in hand with the boost increase?

[AU335]

Originally Posted by thw420

I'm pretty sure one of the major magazines did a dyno (of a second 335i because they couldn't belive the 1st one's high #'s) and on the last dyno attempt they got 299whp. So I'm sure it's possible.

I stand corrected! I do remember that now!

1hour... 66posts.... This is going to be an interesting thread!

[grkm3]

Originally Posted by jpsimon

The same people willing to spend 2000 for a moderate flash that you can't even custom tune.... will be the same people willing to dish out money for an over priced dinan exhaust too

The dinan tune is not that far off from what everyone else is running.With there exh it will be pretty much at the limit of being safe and reliable.

some people just want the basic simple bolt ons,like a chip intake and exh...Something that dinan will offer and you wont have to worry about losing your warenty.

How many people down the line will buy a used 335 if they new it had 20 different piggy back maps on it.I wouldnt want one.I could live with knowing a car had a dinan flash tho.

These are going to be nice cars to pick up in a few years as cpo cars from BMW.

If I was dinan I would bust everyones ballz and run a xmas special and sell them for 1500

[sflgator]

Originally Posted by adc

Do you mean, you should go right ahead and as a welcome gift, treat them like dirt? Way to go...

The other guy just asked to refrain from sarcasm as long as the Dinan rep keeps it shiny. You can question all you want, but be civil about it.

I've decided to stay out of this thread; most consumers are not as dumb as some companies think. However, I guess a few ppl were right when they said that Dinan typically caters to a different consumer than most of us enthusiasts that frequent these online Forums. btw -- I'm not the only one who is questioning their dyno numbers.