38F/38R offset for E92?

BMW! · 07-28-2008, 03:12 PM

This will look way too pushed in from the fender right? I found a set of GOOD LOOKING wheels, 19" hyper silver, 5x120, but the offset is 38F/38R... how would this look w/o spacers? lol

BMW F22 · 07-28-2008, 03:18 PM

It will look okay. Assuming that you're going with 19x9.5 in the rear, the wheels will sit pretty close to where your stock wheels are sitting now. It won't look that bad but spacers would make it look better/more flushed.

BMW! · 07-28-2008, 03:20 PM

Quote:

Originally Posted by Kenny@JleviSW

It will look okay. Assuming that you're going with 19x9.5 in the rear, the wheels will sit pretty close to where your stock wheels are sitting now. It won't look that bad but spacers would make it look better/more flushed.

oh ya damn wheel expert or I wasn't thinking right about the rear being wider than front :P I really hate how my stock look... Is adding spacers dangerous and troublesome?

BMW F22 · 07-28-2008, 03:24 PM

Quote:

Originally Posted by BMW!

oh ya damn wheel expert or I wasn't thinking right about the rear being wider than front :P I really hate how my stock look... Is adding spacers dangerous and troublesome?

There are many people on here that run spacers on their cars and it's been fine. As long as you have the correct bulbs and go with a name brand like H&R you should be fine.

BMW! · 07-28-2008, 03:37 PM

Thanks Kenny!

BMW! · 07-28-2008, 10:07 PM

Does anyone have any other comments for 38F/38R offset of an e92?

ModBargains.com · 07-28-2008, 11:38 PM

Assuming your wheels are 19x8.5 in the front and 19x9.5, I would just get a 5-8mm spacer in the rear. You can go 8mm, but that may cause some rubbing. The front, an ET38 offset should be okay in this circumstance. If you can manage to find it though, you can probably get a 3-5mm spacer and it would look very nice. What wheels are they?

BMW! · 07-29-2008, 09:45 AM

Quote:

Originally Posted by James************

Assuming your wheels are 19x8.5 in the front and 19x9.5, I would just get a 5-8mm spacer in the rear. You can go 8mm, but that may cause some rubbing. The front, an ET38 offset should be okay in this circumstance. If you can manage to find it though, you can probably get a 3-5mm spacer and it would look very nice. What wheels are they?

Some nice looking but not expensive wheels: Ace Strada
Heres a pic:

BMW! · 07-29-2008, 09:49 AM

How about Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 VS 8.5x19" offest 38, 9.5x19" offset 38? I really don't want to add spacers.. below is a Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 set up, and it looks fine and acceptable to me.. also my wheel width are wider then whats shown in the picture.. What do you guys think?

RMA · 07-29-2008, 09:58 AM

Both wheels are gorgous

remmib · 07-29-2008, 11:00 AM

Quote:

Originally Posted by BMW!

How about Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 VS 8.5x19" offest 38, 9.5x19" offset 38? I really don't want to add spacers.. below is a Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 set up, and it looks fine and acceptable to me.. also my wheel width are wider then whats shown in the picture.. What do you guys think?

Those ET38 wheels sit very similar to those 19" oem wheels, only thing is that they are .5" wide, so they will stick out a tad bit more.

BMW! · 07-29-2008, 12:02 PM

cool! Called them and they say they can shave it and custom it to the offset that I want!

remmib · 07-29-2008, 03:32 PM

Quote:

Originally Posted by BMW!

cool! Called them and they say they can shave it and custom it to the offset that I want!

No need to shave off anything of the ET38 wheels. I just meant they would stick out a little bit more than the OEM 19" wheels, which is pretty tucked.

BMW! · 07-29-2008, 03:42 PM

Quote:

Originally Posted by remmib

No need to shave off anything of the ET38 wheels. I just meant they would stick out a little bit more than the OEM 19" wheels, which is pretty tucked.

ya i know what you are saying... but I want it to flush

I am gonna go home and check out the OEM then decide... i think they are pretty tucked in

remmib · 07-29-2008, 03:47 PM

Quote:

Originally Posted by BMW!

ya i know what you are saying... but I want it to flush

I am gonna go home and check out the OEM then decide... i think they are pretty tucked in

You need spacers to make 'em sit flush

BMW! · 07-31-2008, 02:06 PM

just got quoted $1850 with everything... wheels+tires+TPMS+install+balance

BMW MotorSport · 07-31-2008, 02:52 PM

Quote:

Originally Posted by BMW!

Some nice looking but not expensive wheels: Ace Strada
Heres a pic:

Let me know if you need some help with the Ace wheels, I carry their full line.

BMW! · 07-31-2008, 03:59 PM

Quote:

Originally Posted by BMW MotorSport

Let me know if you need some help with the Ace wheels, I carry their full line.

check your pm ~

blakjack23 · 07-31-2008, 04:50 PM

Shaving will not help you make the wheels more flush!

BMW! · 07-31-2008, 04:53 PM

Quote:

Originally Posted by blakjack23

Shaving will not help you make the wheels more flush!

haha ya forget the shaving..,. I am going to check out these wheels in person first! If I don't like them then VMR CSL or V710 it is !

07-28-2008, 03:12 PM	#1
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	38F/38R offset for E92? This will look way too pushed in from the fender right? I found a set of GOOD LOOKING wheels, 19" hyper silver, 5x120, but the offset is 38F/38R... how would this look w/o spacers? lol Last edited by BMW!; 07-28-2008 at 04:32 PM..
	Appreciate 0 Tweet Quote

07-28-2008, 03:18 PM	#2
BMW F22 Major General 3566 Rep 9,788 Posts Drives: ///M235i Join Date: Nov 2005 Location: Bay Area iTrader: (8)	It will look okay. Assuming that you're going with 19x9.5 in the rear, the wheels will sit pretty close to where your stock wheels are sitting now. It won't look that bad but spacers would make it look better/more flushed.
	Appreciate 0 Quote

07-28-2008, 03:37 PM	#5
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	Thanks Kenny!
	Appreciate 0 Quote

07-28-2008, 10:07 PM	#6
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	Does anyone have any other comments for 38F/38R offset of an e92?
	Appreciate 0 Quote

07-28-2008, 11:38 PM	#7
ModBargains.com Banned 475 Rep 13,583 Posts Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 iTrader: (51)	Assuming your wheels are 19x8.5 in the front and 19x9.5, I would just get a 5-8mm spacer in the rear. You can go 8mm, but that may cause some rubbing. The front, an ET38 offset should be okay in this circumstance. If you can manage to find it though, you can probably get a 3-5mm spacer and it would look very nice. What wheels are they?
	Appreciate 0 Quote

07-29-2008, 09:49 AM	#9
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	How about Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 VS 8.5x19" offest 38, 9.5x19" offset 38? I really don't want to add spacers.. below is a Front axle: 8Jx19" IS37, Rear axle: 9Jx19" IS39 set up, and it looks fine and acceptable to me.. also my wheel width are wider then whats shown in the picture.. What do you guys think? Attached Images
	Appreciate 0 Quote

07-29-2008, 09:58 AM	#10
RMA Major 38 Rep 1,015 Posts Drives: 2009 135i M sport coupe Join Date: Jul 2008 Location: Tampa, Fl iTrader: (6) Garage List 2009 135i M sport c ... [0.00]	Both wheels are gorgous __________________
	Appreciate 0 Quote

07-29-2008, 12:02 PM	#12
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	cool! Called them and they say they can shave it and custom it to the offset that I want! Last edited by BMW!; 07-29-2008 at 12:44 PM..
	Appreciate 0 Quote

07-31-2008, 02:06 PM	#16
BMW! Captain 66 Rep 653 Posts Drives: e92 Join Date: May 2008 Location: NY iTrader: (0)	just got quoted $1850 with everything... wheels+tires+TPMS+install+balance
	Appreciate 0 Quote

07-31-2008, 04:50 PM	#19
blakjack23 Major 33 Rep 1,074 Posts Drives: like a bat out of hell Join Date: Feb 2008 Location: Minneapolis, MN iTrader: (3) Garage List '06 325i [0.00]	Shaving will not help you make the wheels more flush! __________________ '06 325i - AT (bite me!) - Jet Black - Black leatherette - Aluminum Trim - Blacklines - 189's - M3 Spoiler
	Appreciate 0 Quote