|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
OEM Emblem Removal Assistance
|
|
06-09-2009, 12:41 PM | #1 |
Speed
63
Rep 407
Posts |
OEM Emblem Removal Assistance
I am installing the Vorsteiner deck lid (extension) and I need to remove the OEM BMW emblem from the rear trunk.
Can anyone tell me how to do this? Is it bolted onto the trunk? I have already attempted dental floss but halfway through the line keep breaking making me think it is bolted into the trunk. Any help is appreciated. SS
__________________
|
06-09-2009, 12:46 PM | #2 |
G.O.A.T.!
1000
Rep 74,998
Posts |
try a CC to get under the edge then use a squeegee or plastic tool if you have them, last resort use a small screw driver against it but be gentle not to far up the badge as you wiggle it off! Good luck..
|
Appreciate
0
|
06-09-2009, 12:49 PM | #3 |
Major
62
Rep 1,211
Posts |
They are not bolted; there are rubber gromets in the 2 holes where you insert the emblem along with 3M tape. The floss technique didn't worked for me either. I used those thin plastic wrappers (usually white or yello) that most shipper usually employ to secure the top/bottom of heavy boxes. They should have something similar in Lowes or Home Depot.
|
Appreciate
0
|
Bookmarks |
|
|