|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
BBS LM rep's, spacer and lower spring.
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
07-24-2010, 10:22 AM | #1 |
Enlisted Member
3
Rep 36
Posts |
BBS LM rep's, spacer and lower spring. [Updated] Pics inside.
Hi there,
I just come from a local dealer with a set of BBS LM rep's wheel in 19 ". Very nice rims! Now I would give a little more aggressive and flush effect. I have the original BMW sport supspension, I'm looking low the front because it is too high, the rear does not need to be much lower them but a little more is always a plus if is not rubbing. Second I'm looking to for spacer, particularly for the rear, I want the rims are more flush. Then, anyonne can advice me on what springs I should run and what thickness of spacers I can go with no rubbing configuration of my rims: Front: 8.5"x19" et 35, Falken FK452 225/35/19 Rear: 9.5"x19" et 35, Falken FK452 265/30/19 Thanks in advance guys !! UPDATE : Here is some pics :
__________________
BMW - Another driving experience !
Last edited by venedesign; 07-25-2010 at 11:47 AM.. |
07-25-2010, 05:15 PM | #4 |
Major
26
Rep 1,345
Posts |
Go with h&r sport springs should sit it perfect , and maybe a 15mm spacer in the back would be good.
__________________
"Surviving in a game where many don't win".
|
Appreciate
0
|
07-25-2010, 10:27 PM | #5 |
Some say...
239
Rep 4,296
Posts
Drives: Fresh
Join Date: Mar 2010
Location: Baton Rouge n NOLA
|
I would go with the street H&R lowering springs for the drop. For the spacers just get some 10mm in the back, I think with the drop 15mm may rub.
__________________
I have exhaust and an intake... |
Appreciate
0
|
07-26-2010, 12:03 AM | #6 |
Enlisted Member
3
Rep 36
Posts |
Hi guy's !
For the wheels, Linea corse exist only in united states, here is too expensive too importe these rims, then we do with what we have here... I want to go with H&R springs, but don't know what kit I should take, there is too much possibilities, in add I should make the good choice between the springs and the spacers to have a good result with no rubbing... So if anyone have the same configuration please advice, thannksss !
__________________
BMW - Another driving experience !
|
Appreciate
0
|
Bookmarks |
|
|