[Projekt_BooGie]

Originally Posted by gbreeE90

Did you buy them from a vendor or from somewhere local? Because Mod bargains doesn't sell tires, and im not sure who carries them locally. Also, who did the alignment for you? I cant wait to see how they look! Hopefully ill get the traction im looking for. The other tires im thinking about are Falken FK452 and Nitto INVO and Yokohama Advan.

I love INVO tires I had them on my truck and loved them, expensive though. I normally get the FK452 good bang for your buck I found them to be a little louder then normally but nothing over bearing. The general exclaim, on tire rack, rates pretty high on wet/dry traction. And they are cheap.

[Forcefed3]

Originally Posted by ACEE

I love INVO tires I had them on my truck and loved them, expensive though. I normally get the FK452 good bang for your buck I found them to be a little louder then normally but nothing over bearing. The general exclaim, on tire rack, rates pretty high on wet/dry traction. And they are cheap.

Yea, I think I might go with the Hankook V12's




After reading all this new stuff Shiv is doing, even though I didnt really like him at first, I might be switching over to PROcede. Its only $645 right now, and the JB4 upgrade is $85 I just found out. I think I would rather sell the JB3 and spend $200.

[Sara]

I survived Black Friday at Victorias Secret...

[Bakeme521]

Originally Posted by gbreeE90

Yea, I think I might go with the Hankook V12's




After reading all this new stuff Shiv is doing, even though I didnt really like him at first, I might be switching over to PROcede. Its only $645 right now, and the JB4 upgrade is $85 I just found out. I think I would rather sell the JB3 and spend $200.

its 645 for you b/c you would be switching to procede from jb3? And I think you should get jb4 b/c it will be fun when I get procede to see what happens.

[Bakeme521]

Originally Posted by Sara504

I survived Black Friday at Victorias Secret...

haha I was wondering when you were going to say something about that.

[Bakeme521]

Oh and I tried to get the LSD in today and I don't even have the right tools so I am going to have to end up bringing it to a place to have it installed. Kind of pissed.

[Forcefed3]

Originally Posted by Bakeme521

its 645 for you b/c you would be switching to procede from jb3? And I think you should get jb4 b/c it will be fun when I get procede to see what happens.

No there is a new version that came out along with their website, its really cool. Its $645 for everyone and I would sell my JB3 for $425~ so it would be a cheap upgrade. http://www.procedetuning.com/

I am excited to see what these single turbos he has listed are, that is something I plan on doing this summer or next fall.

Originally Posted by Bakeme521

Oh and I tried to get the LSD in today and I don't even have the right tools so I am going to have to end up bringing it to a place to have it installed. Kind of pissed.

That sucks, what do you need? I might have it.

[Bakeme521]

Originally Posted by gbreeE90

No there is a new version that came out along with their website, its really cool. Its $645 for everyone and I would sell my JB3 for $425~ so it would be a cheap upgrade. http://www.procedetuning.com/

I am excited to see what these single turbos he has listed are, that is something I plan on doing this summer or next fall.



That sucks, what do you need? I might have it.

Yeah I see that, I shall be buying procede soon now. As for the diff you have to have the certain size press tools that pull and press the bearings in and out. Only like a transmission shop or something will be able to do it. Trust me if you are going to get the LSD, buy it from someone with it already installed. Also, if you are going to install it yourself once you get it, you have to have this special massive wrench that AR design sells to get the drive shaft off. Also, It is so tight that the car has to be on a lift to be able to put a pipe on the wrench to have enough leverage to turn it. It can't be done on jack stands, trust me I found all this depressing news out today.

[Forcefed3]

Originally Posted by Bakeme521

Yeah I see that, I shall be buying procede soon now. As for the diff you have to have the certain size press tools that pull and press the bearings in and out. Only like a transmission shop or something will be able to do it. Trust me if you are going to get the LSD, buy it from someone with it already installed. Also, if you are going to install it yourself once you get it, you have to have this special massive wrench that AR design sells to get the drive shaft off. Also, It is so tight that the car has to be on a lift to be able to put a pipe on the wrench to have enough leverage to turn it. It can't be done on jack stands, trust me I found all this depressing news out today.

Yea, defiantly tell me how much it costs to install. And I think im going to upgrade my JB3 really soon, I need the DP fix, CEL and SES lights are getting annoying quick. When are you installing your downpipes? Im really debating whether I should get some catless mid pipes right now or just wait for a full exhaust system down the road.

[Bakeme521]

Originally Posted by gbreeE90

Yea, defiantly tell me how much it costs to install. And I think im going to upgrade my JB3 really soon, I need the DP fix, CEL and SES lights are getting annoying quick. When are you installing your downpipes? Im really debating whether I should get some catless mid pipes right now or just wait for a full exhaust system down the road.

I wouldn't get catless midpipes. My old car had no cats on it and it as miserable, it smelled so bad. I would just change the mufflers, or do something along those lines.

[Sara]

Originally Posted by Bakeme521

haha I was wondering when you were going to say something about that.

I about cried at one point. One of my associates had a panic attack and we had to rush her out of the store. It was literally a zoo. People were acting like savages. Towers were falling everywhere. Where's the facepalm icon when I need it. Oh well, surpassed sales plan so its all gravy.

[Bakeme521]

Originally Posted by Sara504

I about cried at one point. One of my associates had a panic attack and we had to rush her out of the store. It was literally a zoo. People were acting like savages. Towers were falling everywhere. Where's the facepalm icon when I need it. Oh well, surpassed sales plan so its all gravy.

Oh jeez I am sorry to hear that, at least it ended on a good note.

[Forcefed3]

Originally Posted by Bakeme521

I wouldn't get catless midpipes. My old car had no cats on it and it as miserable, it smelled so bad. I would just change the mufflers, or do something along those lines.

Yea I wouldn't like that, I was just thinking for performance and a little extra sound. I don't notice any smell at all with catless downpipes.

[Bakeme521]

Originally Posted by gbreeE90

Yea I wouldn't like that, I was just thinking for performance and a little extra sound. I don't notice any smell at all with catless downpipes.

Thats b/c you still have 2 other cats in there, the car will still pass emissions. But if you get rid of them you can't have the windows down in traffic b/c it smells so bad.

[Forcefed3]

Originally Posted by Bakeme521

Thats b/c you still have 2 other cats in there, the car will still pass emissions. But if you get rid of them you can't have the windows down in traffic b/c it smells so bad.

Yea, defiantly dont want that. I think im just going to go with Charge pipe and BOV for now instead. Im running out of performance mods
Guess it is time to save up and get a single turbo kit right when I hit 50,000 miles. But that might take a while.

[Bakeme521]

Originally Posted by gbreeE90

Yea, defiantly dont want that. I think im just going to go with Charge pipe and BOV for now instead. Im running out of performance mods
Guess it is time to save up and get a single turbo kit right when I hit 50,000 miles. But that might take a while.

I want to buy a synapse BOV for my charge pipe, I just have to buy the flange. I also want to get the FMIC from ebay b/c it had low IATs than helix which is the one I wantED.

[Forcefed3]

Originally Posted by Bakeme521

I want to buy a synapse BOV for my charge pipe, I just have to buy the flange. I also want to get the FMIC from ebay b/c it had low IATs than helix which is the one I wantED.

Which FMIC is that, big tom? We will have to run it against my HPF And yea, im thinking synapse or HKS.

[Projekt_BooGie]

Originally Posted by Sara504

I survived Black Friday at Victorias Secret...

Originally Posted by Sara504

I about cried at one point. One of my associates had a panic attack and we had to rush her out of the store. It was literally a zoo. People were acting like savages. Towers were falling everywhere. Where's the facepalm icon when I need it. Oh well, surpassed sales plan so its all gravy.

I know that feeling I use to work at Aeropostale in the both malls in baton rouge....one of the reasons I got out of retail!!!

Glad you made it through!!!


hey ya'll if you by chance come across a 335 coupe let me know. This what I'm looking for:
EXTERIOR: black/space grey/white/silver/montego (in that order)
INTERIOR: coral red/black
DRIVE TRAIN: 6 spd (not opting out DCT)
OPTIONS: sport package/idrive
MILEAGE: the lower the better nothing over 50k though (but thats still to much but hey.....)
PRICE: I say $26k (give or take a few hundred or so (I know they have some out there for around that price))

[EnjoixE92]

Originally Posted by ACEE

I know that feeling I use to work at Aeropostale in the both malls in baton rouge....one of the reasons I got out of retail!!!

Glad you made it through!!!


hey ya'll if you by chance come across a 335 coupe let me know. This what I'm looking for:
EXTERIOR: black/space grey/white/silver/montego (in that order)
INTERIOR: coral red/black
DRIVE TRAIN: 6 spd (not opting out DCT)
OPTIONS: sport package/idrive
MILEAGE: the lower the better nothing over 50k though (but thats still to much but hey.....)
PRICE: I say $26k (give or take a few hundred or so (I know they have some out there for around that price))

in Houston they are helling alot of 2007/2008 335i coupes for cheap like 25k-30k with like 20,000 milages around there. go on ebay n look around and see if the seller is in houston and call em up and nogociate. i almost had a fully loaded red on red M5 2009 with 25k milages on it for 58k with 6 years/100k milages too. but insurance was too much. the pain in buying cars in diffrent state is going to get it or shipping is too expensive and u gotta go see the car first before buy because you wouldnt like to bring it home and find poo poo under your seat LOL!. goodluck man. or the best way is go to dealership and see if you can find some certified used. they can search all over the states and trade their cars for another one for you.

[Forcefed3]

Anyone want to buy a JB3 from me? Just a feeler right now, but if someone offers I will most likely sell it. Im about to have so many mods that PROcede is probably necessary. JB3 is defiantly a great tune to get you started though. Especially if you just want something really simple.
http://www.e90post.com/forums/showth...99#post8403199

[Projekt_BooGie]

Originally Posted by EnjoixE92

in Houston they are helling alot of 2007/2008 335i coupes for cheap like 25k-30k with like 20,000 milages around there. go on ebay n look around and see if the seller is in houston and call em up and nogociate. i almost had a fully loaded red on red M5 2009 with 25k milages on it for 58k with 6 years/100k milages too. but insurance was too much. the pain in buying cars in diffrent state is going to get it or shipping is too expensive and u gotta go see the car first before buy because you wouldnt like to bring it home and find poo poo under your seat LOL!. goodluck man. or the best way is go to dealership and see if you can find some certified used. they can search all over the states and trade their cars for another one for you.

yeah I see that....I've been on ebay/cars.com/autotrader I've been looking hard. Shipping i didn't think shipping was that bad I shipped a non-running car for like $400 buck. But as long as it is in an 8 hour radius I'll drive to get it. I've been using bmwusa.com under there bmw search option and haven't found anything. I found on in NJ silver/coral red/6spd/idrive and they only wanted $25k I have a friend that stays about 3 hours from NJ so....

But i'm looking super hard!!!

[Forcefed3]

Originally Posted by ACEE

yeah I see that....I've been on ebay/cars.com/autotrader I've been looking hard. Shipping i didn't think shipping was that bad I shipped a non-running car for like $400 buck. But as long as it is in an 8 hour radius I'll drive to get it. I've been using bmwusa.com under there bmw search option and haven't found anything. I found on in NJ silver/coral red/6spd/idrive and they only wanted $25k I have a friend that stays about 3 hours from NJ so....

But i'm looking super hard!!!

Do you plan on modifying it?