|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
WTB idrive parts and connector pigtails for my Retrofit!!!
|
|
07-03-2014, 10:44 AM | #1 |
Nomore
149
Rep 793
Posts |
WTB idrive parts and connector pigtails for my Retrofit!!!
So im doing an idrive retrofit in my e92 335i. Right now it does not have navigation. So i already bought a CCC idrive system. But i need some connectors because it didnt come with all of them. CCC Idrive=2006-2008 CIC Idrive =2009-2011/12 So i need connector pig tails.( the connector cut off the harness with a few inches of wire left, so i can make new connections) So far i need: CCC idrive screen- power connector. Big black 2 row connector with a grey locking arm CCC headunit fan connector- small 3 or pin connector. Plugs into the fan on the back of the headunit fan. CCC/CIC idrive knob connector- small 4 pin connector. Connects to bottom of knob. Need 2. One for the back of the head unit and one for the knob itself. Same on both sides i believe. Also need a few other parts if you have: -Climate control trim from a navigation equipped car. -Center console -aluminum trim- with CIC or CCC Idrive knob cutout (will also -consider other interior trim styles(piano black,etc)) If anyone knows the part numbers for any of these connectors that would be great also! |
Bookmarks |
|
|