[madskillzE90]

So any meets going on here in AZ? It would be nice to see and talk e90's ect.

[The Maxican]

Originally Posted by madskillzE90

So any meets going on here in AZ? It would be nice to see and talk e90's ect.

You should come to the pavilions! It's off E Indian Bend Rd. and the 101. It goes on every Saturday and we usually have a decent group of BMWs show up each week from 7pm on.

[madskillzE90]

Originally Posted by The Maxican

You should come to the pavilions! It's off E Indian Bend Rd. and the 101. It goes on every Saturday and we usually have a decent group of BMWs show up each week from 7pm on.

Thanks! Sounds good ill have to check it out.

[EJ_3]

I'll be coming to Arizona in two weeks and trying to see if anyone is interested in my HRE's. If interested, let me know.
http://www.e90post.com/forums/showthread.php?t=960174

[Sean335i]

anyone have experience with the BMS DP Fix? I am running cobb, the tune will clear all DTCs, but puts the tests into a non ready state. I have driven around after the dpfix install and keep pulling codes, cant seem to figure the damn thing out.

gotta pass emissions, and short of yanking my catless dps out and running the stockers for a day, I hope i can get some help on the dp fix. Thanks

[Northbay]

I might possibly be out at pavilions this weekend. Anybody else rolling? Would be cool to meet some bmw guys.

[PHXE90]

Hey guys, new to PHX and I'm buying an 07 E92 next week. I am looking for a few things and figured you guys would know best. I am wanting to get some wheels powder coated and wondering who everyone uses? Also, I'll be throwing some coilovers on the car along with M3 control arms and I will need an alignment. Any good shops for lowered cars? I'm located in North Phoenix btw... Looking forward to meeting some of you guys. Thanks for the help in advance!

[Myrder]

Originally Posted by Sean335i

anyone have experience with the BMS DP Fix? I am running cobb, the tune will clear all DTCs, but puts the tests into a non ready state. I have driven around after the dpfix install and keep pulling codes, cant seem to figure the damn thing out.

gotta pass emissions, and short of yanking my catless dps out and running the stockers for a day, I hope i can get some help on the dp fix. Thanks

you need to run with cobb not clearing codes first. Then you have to read the codes you get for the Cats, and then you adjust the dial one way or the other based on said codes. There is a pdf floating around.

[Northbay]

Originally Posted by PHXE90

Hey guys, new to PHX and I'm buying an 07 E92 next week. I am looking for a few things and figured you guys would know best. I am wanting to get some wheels powder coated and wondering who everyone uses? Also, I'll be throwing some coilovers on the car along with M3 control arms and I will need an alignment. Any good shops for lowered cars? I'm located in North Phoenix btw... Looking forward to meeting some of you guys. Thanks for the help in advance!

I've used Arizona Powder Coat (can't remember if it's technically in Tempe or Phoenix, but it's on Washington) before and had a good experience. Think I paid about ~250 to have 4 wheels coated and then sprayed with clear.

As far as an alignment goes, I had my e92 done at Vaughn Motorworks but it was included in the price of the coilover install, so I dont' know what the alignment specifically runs. I know a lot of people with lowered Subies and Evos use Network Alignment in Mesa with good results, though, so maybe check them out.

Side note, I want to remove the adjustment collars on my rear coilovers to bring the rear down a tad (KW V1s lowered all the way apparently don't even erase the entire wheel gap), so if you end up having some people by to help you out, maybe I could stop by knock that out too.

Welcome to PHX, btw!

[rborane]

Does anyone in the Tucson area have the n54 spark plug socket tool?

[Truax]

I bought a JB4 off a couple weeks back off craigslist and still dont have it installed. Anyone want a case of beer or some cash to help a brother out? My car is an N55.

[PHXE90]

Hey guys, new to PHX. I moved down here from Salt Lake City, Utah. I started a FB page called Arizona BMW Enthusiasts after searching and not finding anything. I figure it's a place we can go and share anything BMW related, buy and sell, discuss meets ect... Take a look and LIKE if your interested. Looking forward to meeting you guys!

https://www.facebook.com/AZBMWE

[Northbay]

Originally Posted by Truax

I bought a JB4 off a couple weeks back off craigslist and still dont have it installed. Anyone want a case of beer or some cash to help a brother out? My car is an N55.

Where in Tempe area you? I don't think it's very hard.

[Truax]

Originally Posted by mjc1055

Where in Tempe area you? I don't think it's very hard.

I am off the I10 and Elliot. I'm sure if I saw how to do it once I would think the same thing, it's just intimidating the first time.

[hookandpull]

Originally Posted by Truax

I bought a JB4 off a couple weeks back off craigslist and still dont have it installed. Anyone want a case of beer or some cash to help a brother out? My car is an N55.

I'm in NorthWest Tucson come on down and we'll throw it on. Super easy

[Northbay]

Few things for sale if anybody is interested:

-e92 aero lip, painted Monaco Blue - never installed $125
-Stock e92 pre-lci grills - $10
-Blackberry music gateway (brand new, only opened) $20

[Acekid187]

My 10 55 can you send me pics of your aero lip. Some installed on the car if you have em

[Murph335]

Anyone have a dp fix BMS or cp-e I can buy or borrow?

[Murph335]

Picked up an e93 2010 jet black so I need many parts!
CSL trunk,
mtech bumpers,
angel eye upg
Cf wrap or alum dash kit
BMS intake,
cobb ap,
AR DP
sick offset wheels,
and suspension.

Wish list:
RB turbos
Hfs 3 or 4 kit
LSD

Show me what u got! In am in Tempe/chandler.

[ricardocareaga27]

Hi guys , I have my oem msport suspension for sale . They came out from my 2010 e90 msport , shocks ,springs ,pretty much what you need . Suspension has 45k daily driven miles .never seen the track or anything like that.Reason I am selling is because I upgraded to st coilovers you can txt me at 915 345-21-six-five . Thanks

[E90Mario]

Originally Posted by Murph335

Picked up an e93 2010 jet black so I need many parts!
CSL trunk,
mtech bumpers,
angel eye upg
Cf wrap or dash kit
BMS intake,
cobb ap,
sick offset wheels,
and suspension.

Wish list:
RB turbos
Hfs 3 or 4 kit
LSD

Show me what u got! In am in Tempe/chandler.

I wrap trims for the locals. I've done 9 or 10 E9X trims! Feel free to shoot me a PM.

[C.Pop]

Hey Mario, how durable is the vinyl wrap? Does it stand up to some wear & tear abuse? You wrapped my trim in alcantara btw, it still looks nice, just thinking about changing some things.....