|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Initialising the Sunroof
|
|
06-01-2014, 01:51 PM | #1 |
Private First Class
5
Rep 100
Posts |
Initialising the Sunroof
Can anyone remember how to do this on an e9x?
The sunroof has once again decided to park itself about 1/4" low. I thought it is just a case of motoring it all the way to the limits of it's travel to reset it. But that's not doing the trick. Is there something else needs holding down or pressing whilst motoring it ? Also I'm sure last time whilst doing this I got a warning the 'trap protection' was not active - but that's not happening. (But there are no other warnings. Anyone got any ideas ? Many thanx in advance. |
06-01-2014, 01:59 PM | #2 |
Private First Class
11
Rep 185
Posts |
I believe if you hold down the sunroof button for 30 seconds it resets the sunroof by making it adjust to each position, then back to closed. Hold it down and let it go through all of the positions and close, then let go. Hope this helps.
|
Appreciate
0
|
Bookmarks |
|
|