[Yinger]

yeah, just figured i'd try stage 2 with the upgraded intercooler. Should have dynoed both stage 1 and stage 2 but didn't want to hold everyone up.

[ontopofm]

Originally Posted by Yinger

yeah, just figured i'd try stage 2 with the upgraded intercooler. Should have dynoed both stage 1 and stage 2 but didn't want to hold everyone up.

how come stage 2 canbus runs more boost than stage 3 non-canbus?

[OpenFlash]

Originally Posted by ontopofm

how come stage 2 canbus runs more boost than stage 3 non-canbus?

All things equal, it doesn't. But in Yinger's case, he's got a strange combo of mods. FMIC but essentially stock everywhere else. Stg 3 is the only map that actually expects low iATs.

Shiv

[Ilma]

Originally Posted by shiv@vishnu

All things equal, it doesn't. But in Yinger's case, he's got a strange combo of mods. FMIC but essentially stock everywhere else. Stg 3 is the only map that actually expects low iATs.

Shiv

I'm running an upgraded FMIC with stock exhaust also.....but on stage 1 map.

What does the stage 3 do to accomodate an intercooler upgrade?

[OpenFlash]

Originally Posted by Ilma

I'm running an upgraded FMIC with stock exhaust also.....but on stage 1 map.

What does the stage 3 do to accomodate an intercooler upgrade?

Different IAT/Boost compensations.

Shiv

[Gen_E92]

Originally Posted by shiv@vishnu

Different IAT/Boost compensations.

Shiv

So, is it better to run stage 1 and turn up the UT if we have upgraded FMIC with stock DP and/or catback?

[Ilma]

Originally Posted by Gen_E92

So, is it better to run stage 1 and turn up the UT if we have upgraded FMIC with stock DP and/or catback?

+1 Good question.....

Would this compensate for the lower intake temps and corresponding lower boost?

[Yinger]

maybe i'll try stage 1 and up the user tq

[elim11]

Originally Posted by shiv@vishnu

Can some more pump gas dyno graphs be posted?

Shiv

Shiv or anyone who can chime in,
I posted one on 1st page. (Stage 1 canbus, 75% UT) Question regarding the dyno chart. What is the little spike in power at 4300 rpm?

[usc335]

Originally Posted by shiv@vishnu

All things equal, it doesn't. But in Yinger's case, he's got a strange combo of mods. FMIC but essentially stock everywhere else. Stg 3 is the only map that actually expects low iATs.

Shiv

At least for me, I think Yinger's mods are perfectly logical. I have no plans to remove my primary cats (trying to stay legal) and an intercooler is the next mod on my list (I know, I know, I removed my secondary cats, but I think they are only effective during cold start anyway). So, is a tune, DCI, downpipe-back exhaust, and intercooler that unusual? Are there any plans to create a map specifically for this combo? Thanks.

[kryzeofkrayzie]

Originally Posted by ontopofm

The runs below are with Rev I, VK IC, AR DPs, DCI, Magnaflow High Flow Cats in place of 2ndary cats and of course 91 octane. First 2 runs are stage 3 set at 83%, run 3 is stage 1 set at 75%.

Nice #'s

I wasn't at dyno day, but I was at the same dyno 1 day before dyno day. Here are my #'s for comparison sake. (It was a little cooler the day I dyno'd)

Mods are:

AR designs dp
Injen DCI
HKS exhaust
ETS FMIC
JB 3 map #3 (91 octane)
heavy 19's

[Mr. 5]

Yah, I saw this post, but I'll be honest...that's very hard to believe that you pulled off those numbers with only 91 octane.
Great job.

Originally Posted by kryzeofkrayzie

Nice #'s

I wasn't at dyno day, but I was at the same dyno 1 day before dyno day. Here are my #'s for comparison sake. (It was a little cooler the day I dyno'd)

Mods are:

AR designs dp
Injen DCI
HKS exhaust
ETS FMIC
JB 3 map #3 (91 octane)
heavy 19's

[riceygts]

Originally Posted by Mr. 5

Yah, I saw this post, but I'll be honest...that's very hard to believe that you pulled off those numbers with only 91 octane.
Great job.

I dynoed with kryze and had 91 as well. We both got similar numbers. I believe weather was a big factor.

[ontopofm]

Originally Posted by kryzeofkrayzie

Nice #'s

I wasn't at dyno day, but I was at the same dyno 1 day before dyno day. Here are my #'s for comparison sake. (It was a little cooler the day I dyno'd)

Mods are:

AR designs dp
Injen DCI
HKS exhaust
ETS FMIC
JB 3 map #3 (91 octane)
heavy 19's

thanks for graph, awesome numbers, high flow cats vs. catless + better weather =~15rwhp & 22rwtp, wonder if Rev II will gives me that power since it makes more than Rev I.

[kryzeofkrayzie]

Originally Posted by Mr. 5

Yah, I saw this post, but I'll be honest...that's very hard to believe that you pulled off those numbers with only 91 octane.
Great job.

91 octane (chevron).. My car has not seen 100 octane period. I have no ties / sponsorship w/ any of the above manufactures. This is an independent dyno session I paid for out of my pocket. Why would I post up lies?

Well I do have a frequent dyno card w/ MD. So i'll dyno on a hotter day where conditions are less than ideal. The day I dyno'd it was 10 am 66 degrees about 85% humidity so take that for what its worth.

[stealth-twntrbo]

Any more dynos out there to post up!?! Love to see some more PROcede dynos and also some more pump gas dynos!

[lazyassand1balla24]

nice numbers

[SCCAForums.com]

Am I the only guy wondering why these runs are SAE Corrected? Which seem to be the industry average for comparing nationally?

Is this just so everyone feels better about their power 'today'?

Dave

[xsb00st]

Originally Posted by SCCAForums.com

Am I the only guy wondering why these runs are SAE Corrected? Which seem to be the industry average for comparing nationally?

Is this just so everyone feels better about their power 'today'?

Dave

LOL it was Father's Day... give everyone the chance to feel good.

BTW, you've been a member since 2007; you should know that standard e90post dyno's are in STD!

[SCCAForums.com]

Yeah... I guess I've just always compared to 'all the other' forums... and they are SAE...

Don't let the M3Post guys know! :P

Dave

[vase330]

Originally Posted by shiv@vishnu

All things equal, it doesn't. But in Yinger's case, he's got a strange combo of mods. FMIC but essentially stock everywhere else. Stg 3 is the only map that actually expects low iATs.

Shiv

Shiv, incase you don't know this is very common combo. I have upgraded FMIC too and stock exhaust etc. In future if I mod anymore, it will be DPs for an even stranger combo. So is it? I think not, just the opposite. Maybe do a poll. Might want to account for this in your upcoming autotune.