[lanwanman1956]

New guy, 1st post. Nothing found on a search.

I have been doing a good bit of underhood maintenance on my '07 E92 and replacing the windshield cowl was one of the tasks. What I have run into is that the clips that retain the washer jet feed hoses and the wiring harness for the heated jets by way of zip ties did not come with the cowl and I am utterly unable to find any reference to them. I do not see them at realoem or at any of the dozens of other parts sites I have combed through.

The old clamps are also seemingly impossible to remove without rendering the metal insert part of the clip unusable.

Has anyone had a similar issue and perhaps either located a part # and/or source for them or has a method to remove the old ones without mangling the metal insert that locks them into the tower on the cowl?

TIA!

[Cal122]

Welcome to the group, always fun to locate part numbers for these small parts

61139200225 - Looks like the clip in your picture

You may also need some additional clips, check the schematic here:

https://www.realoem.com/bmw/enUS/sho...diagId=61_2090

[lanwanman1956]

LOL...literally the only section that I did not look under was Electrical. Thank you for that info!