[alpina527]

Originally Posted by charles.soori

I added +MUEH but it doesn't seem to work. i'm trying to do the factory way instead of disabling cold and warm check. Did any get this to work proper or maybe changing the voltage on it.

For an FRM2 it's +MUEB added to the VO

For an FRM3 it's +MUH2 added to the VO

[charles.soori]

Thanks will try that tomorrow

Originally Posted by alpina527

For an FRM2 it's +MUEB added to the VO

For an FRM3 it's +MUH2 added to the VO

[charles.soori]

how do i delete the old vo i added?

[Elliott@DetailAddict]

highlight it in the vo menu box and press delete

[charles.soori]

ya i just did a search and found it here
ftp://94.212.182.18/Other-Software/N..._Order_CAS.pdf

But even after adding the vo lights still blinks fast only way they blink slow is if i nicht_active cold and warm.

[spiike32]

Originally Posted by E90PAT

Excellent! Never ended up using this but i hope someone out there, in this vast world, desperate for the answer currently googling, will come across this very thread, and make their day that much better.



(Pukes)

lol

I am one of those people.. haha. thanks everyone for the answers in this thread.

Also what does CC_MELD_BFD_BL do? On the spreadsheet of known code list, it says it is required to get rid of an error. I just finished coding my car without the MELD and I don't get errors or fast blinking...

[charles.soori]

Did you just disable cold and warm? Me after adding MUEB i still needed to disable cold and warm for my rear but my front led lights worked without doing any coding maybe the MUEB is for the front lci lights?

Originally Posted by spiike32

I am one of those people.. haha. thanks everyone for the answers in this thread.

Also what does CC_MELD_BFD_BL do? On the spreadsheet of known code list, it says it is required to get rid of an error. I just finished coding my car without the MELD and I don't get errors or fast blinking...

[spiike32]

Originally Posted by charles.soori

Did you just disable cold and warm? Me after adding MUEB i still needed to disable cold and warm for my rear but my front led lights worked without doing any coding maybe the MUEB is for the front lci lights?

I just went into NRFM since mine is 2007 and did the ones on the first page. Didn't change VO or anything.

[aios25]

How do I code for an e92 325i with frm 2 if I wish to retrofit the lci tail lights? Is this via changing the vo? Please help.

[E90PAT]

Originally Posted by spiike32

I am one of those people.. haha. thanks everyone for the answers in this thread.

Also what does CC_MELD_BFD_BL do? On the spreadsheet of known code list, it says it is required to get rid of an error. I just finished coding my car without the MELD and I don't get errors or fast blinking...

alas, in some cosmic form of return for my generosity my thread has become useful to myself. Working on an e90 lci retrofit now

[jrdnlc]

Can someone post a pic of how the tail lights look once done? Trying ro decide if i should but them

[E90PAT]

Originally Posted by mecka

Can someone post a pic of how the tail lights look once done? Trying ro decide if i should but them

look for me on the photo subforums, paintig my trunk now

[Elliott@DetailAddict]

Originally Posted by aios25

How do I code for an e92 325i with frm 2 if I wish to retrofit the lci tail lights? Is this via changing the vo? Please help.

If you don't update your footwell module, you need to edit single lines.

[aios25]

How do you do the coding if it is via auto logic?

[Peertwelve]

Originally Posted by alpina527

Let me know how it goes. It took ages to find out how to do it

How is this done? This is a very cryptic thread. Are you guys saying that instead of disabling bulb checks, we can instead add to the cars VO to accomplish the same? Am trying to help a forum member and I cannot find the right bulb check parameters in his FRM. Thoughts?

[Elliott@DetailAddict]

You can use the VO method if you have the correct footwell module for the retrofit. If you want to use the old footwell, you use the bulb check removal method.

[AcExSpades]

My car was coded and everything work correctly.

However, I'm getting an error on my iDrive which says "Rear right Brake Lamp Malfunction"

This error easily goes away in the summer time, but takes a while longer or maybe doesn't go away at all during winter.

Any advice?

[Yvette]

Originally Posted by Grant@DetailAddict

You can use the VO method if you have the correct footwell module for the retrofit. If you want to use the old footwell, you use the bulb check removal method.

my car is 08 March production, is this correct footwell module or only way to disable error/fast blinking is bulb check removal?

[1QuikWS6]

Originally Posted by e90sexion

my car is 08 March production, is this correct footwell module or only way to disable error/fast blinking is bulb check removal?

You do not have the correct NFRM - turning off bulb checks is your easiest/cheapest avenue

[Yvette]

thanks!

[mot]

I just did nicht_aktiv to:

KALTUEBERWACHUNG_BL_M_1 (cold brake light)
KALTUEBERWACHUNG_BLK_H (cold signal rear)
WARMUEBERWACHUNG_BL_M_1 (warm brake light)

No errors, no fast blinker.

I do get flickering at start up and a buddy told me he sees flickering after I use my turn signals. I might have to code WARMUEBERWACHUNG_BLK_HI (warm signal rear) to nicht_aktiv also.

Is this correct?

[Cbozz]

Originally Posted by Neutrino45

In case you need it. Here is the instruction on how to change the VO.

So let's say when I'm coding my E90 for the Xenons I have to put $522 in VO, but following those instructions, do I still have to change job in LMA...?