[Sidewinderpb]

Has anyone heard of a BMS intake melting?

I bought one off of a member here, and noticed that the opening that attaches to the cone wasn't perfectly oval, but didn't think twice about it.

After having tons of issues, I happened to notice a picture of it online, and realized that mine was deformed as hell. Instead of an oval, mine looked more like a banana, and wasn't even close to sealing properly.

I put the stock intake back in, and bam, no more issues. Doesn't die at cold start anymore and boost is fine.

[Andrewe92]

Originally Posted by Sidewinderpb

Has anyone heard of a BMS intake melting?

I bought one off of a member here, and noticed that the opening that attaches to the cone wasn't perfectly oval, but didn't think twice about it.

After having tons of issues, I happened to notice a picture of it online, and realized that mine was deformed as hell. Instead of an oval, mine looked more like a banana, and wasn't even close to sealing properly.

I put the stock intake back in, and bam, no more issues. Doesn't die at cold start anymore and boost is fine.

yeah I actually have read somewhere else that it melts , I was thinking of getting one though, I might just be better off with a drop in filter

[Sidewinderpb]

Yeah either that or an Injen, as it's not plastic. If you get one used, make sure to get plenty of pictures! This guy played me.

[Exile]

If I recall correctly, if the previous owner had a strut brace where it was over the bms, it could cause some melting.

[Sidewinderpb]

Originally Posted by Exile

If I recall correctly, if the previous owner had a strut brace where it was over the bms, it could cause some melting.

That sounds like a plausible explanation.

[mike@x-ph.com]

I have the DCI on my car, running 19-20 psi boost in Las Vegas Desert weather.
No problems at all ...
I also have never heard of the DCI melting on its own.

[Tiago@VRSF]

The DCI won't melt but their N55 intake uses a plastic intake pipe. If it's not properly braced and rests on any of the aluminum on the car, it could potentially melt.

[Sidewinderpb]

Yeah it's the N55 intake. Unfortunately, it was shipped to me that way.

[Dark_Knight_335]

That is terrible. Will he refund you and pay for you to ship it back?

[Sidewinderpb]

Originally Posted by Dark_Knight_335

That is terrible. Will he refund you and pay for you to ship it back?

I didn't even bother asking. It's been a few months; can't believe that I didn't realize it initially.

It was pretty cheap as a downpipe + intake combo. I have to say though - the downpipe was flawless.

[Dark_Knight_335]

Awww man- yea definitely check out product immediately. Strike while the iron's hot (no pun intended)

[Sidewinderpb]

Hahaha yeah man - lesson learned. For the price I paid, it's not that big a deal. More of an inconvenience, as now I have to get another intake.

[Mike@N54Tuning.com]

BMS warranties them. Just ship them the tube and they can send you another one.

Mike

[Sidewinderpb]

Originally Posted by Mike@N54Tuning.com

BMS warranties them. Just ship them the tube and they can send you another one.

Mike

Really? Their website says that the provide absolutely no refunds on intakes.

[Dark_Knight_335]

BMS has their own share of problems to deal with right now- don't count on it.

[Mike@N54Tuning.com]

Originally Posted by Sidewinderpb

Really? Their website says that the provide absolutely no refunds on intakes.

Huh? What does that have to do with anything? Just email a photo of the issue to Jason @ BMS and if you ask nicely I bet they will swap the tube out for you even if bought used.

Mike

[Sidewinderpb]

Originally Posted by Mike@N54Tuning.com

Huh? What does that have to do with anything? Just email a photo of the issue to Jason @ BMS and if you ask nicely I bet they will swap the tube out for you even if bought used.

Mike

Thanks Mike! I'll definitely give that a shot!

[Sidewinderpb]

Alright, so here's the update:

Mike was correct! I emailed Jon at BMS regarding my intake, and explained exactly what happened. He promptly responded, asking for some pictures.

So, I sent some pictures over and awaited his response. That same night, he emailed me back, stating that they would immediately replace the intake at no charge.

Today, I received two emails from Jason. The first contained the tracking number and the second, and explanation. I must say, I'm truly impressed that the engineer of the intake (Jason) felt the need to contact me and explain what likely happened.

Needless to say, I give BMS an A-fucking-Plus (excuse my language). Everyone there is a dream to work with! Thanks guys!

Edit: corrected a name =-]

[Andrewe92]

Glad it worked out!! I hate when people complain how them because they have great support

[Sidewinderpb]

They really are great!

[blaster3500]

Glad it worked out. I have had nothing be great service from BMS