Nashville/Clarksville Meets?

MPLICIT · 03-22-2017, 08:16 PM

Anyone in this area want to get together? I'm new here from AZ and I am not aware of any fun meets that happen other than C&C

E30_335i · 04-03-2017, 08:04 PM

I'll be up your way this weekend at NCM, Bowling Green tracking my car. Stop by and say hi.

Jarrod · 04-04-2017, 01:07 PM

Quote:

Originally Posted by E30_335i

I'll be up your way this weekend at NCM, Bowling Green tracking my car. Stop by and say hi.

How did I not know about this track until just now? I'm only an hour away. That is so cool!

E30_335i · 04-04-2017, 03:14 PM

Stop on by. I'll be there two days. Guests are welcome and free admission. Look for my rig, hard to miss as its the only one like it, anywhere.

Jarrod · 04-04-2017, 03:22 PM

Sold. If I can get away this weekend I will check it out. Love your rig - you are doing it right!

MPLICIT · 04-05-2017, 11:03 AM

Quote:

Originally Posted by Jarrod

How did I not know about this track until just now? I'm only an hour away. That is so cool!

I did not know about this either until just the other day. It apparently was finished just really recently so it's a new track. How cool!

E30_335i · 04-10-2017, 08:39 AM

Was fantastic weekend. Next time I'm up there, earlier notice.

MPLICIT · 04-10-2017, 01:59 PM

Quote:

Originally Posted by E30_335i

Was fantastic weekend. Next time I'm up there, earlier notice.

Wow it looks like a blast! I cannot wait till my Z4 is done to come up and hang out. S65 going in this week...

Recommend any shops to engineer proper engine mounts from something poorly tacked up? Also looking for a local shop to do my driveshaft splicing

E30_335i · 04-10-2017, 03:19 PM

Quote:

Originally Posted by ApolloTheGod

Wow it looks like a blast! I cannot wait till my Z4 is done to come up and hang out. S65 going in this week...

Recommend any shops to engineer proper engine mounts from something poorly tacked up? Also looking for a local shop to do my driveshaft splicing

I have a friend with a shop, Fusion Works down here in Huntsville. He does amazing work and can fab anything. I can check my BMW contacts up in N'ville and see who does fabrication work up there though.

MPLICIT · 04-10-2017, 05:50 PM

Quote:

Originally Posted by E30_335i

I have a friend with a shop, Fusion Works down here in Huntsville. He does amazing work and can fab anything. I can check my BMW contacts up in N'ville and see who does fabrication work up there though.

Please do that would be wonderful.

agent · 04-11-2017, 01:18 PM

Give Bret at German Motorworks a shout. If they can't do it they'll know someone who can.

Love the rig Gary!

Elove1515 · 05-08-2017, 04:54 PM

New to Nashville and just bought my first BMW an '09 335i E93!! would love to find out about any meets or anything in the area. I just bought a Carly coder and the app as well. Im excited to try that out! also bought two cone air intakes and doing a dyi air filter switch as well!

GMWNashville · 05-10-2017, 01:18 PM

Quote:

Originally Posted by Elove1515

New to Nashville and just bought my first BMW an '09 335i E93!! would love to find out about any meets or anything in the area. I just bought a Carly coder and the app as well. Im excited to try that out! also bought two cone air intakes and doing a dyi air filter switch as well!

Welcome to Nashville and congrats on the new car! Let me know if there is anything we can do for you! Cars and coffee is in Cool Springs every first Saturday of the month!

TN8Shooter · 05-17-2017, 08:54 PM

Live near Nashville, and just bought my 1st BMW. Love my '13 335i E92 coupe so far.

Emilime75 · 02-04-2018, 12:07 PM

Hey, guys. Also a new(once again, after many years) BMW owner. Bought myself a Christmas present, a 2010 E92 LeMans Blue 335i. A good buddy of mine has an F10 M5. Would love to meet up with some local people, especially if you're into DIY and modding your car, as I am and will slowly be doing things to it.

PS I've been meaning to make it up to the NCM track for quite a while. Are there any spectator areas throughout the track for people to watch the events? All I ever see in videos is corner workers and their little shade huts.

03-22-2017, 08:16 PM	#1
MPLICIT Major 92 Rep 1,013 Posts Drives: Z4MC S65B40A Swap Join Date: Nov 2012 Location: Nashville, TN iTrader: (9)	Nashville/Clarksville Meets? Anyone in this area want to get together? I'm new here from AZ and I am not aware of any fun meets that happen other than C&C
	Appreciate 0 Tweet Quote

04-03-2017, 08:04 PM	#2
E30_335i Second Lieutenant 169 Rep 212 Posts Drives: 2011 335i Join Date: Jun 2014 Location: Huntsville, AL iTrader: (0)	I'll be up your way this weekend at NCM, Bowling Green tracking my car. Stop by and say hi. __________________ 2011 335i Sport, M3 control arms front/rear, ECS Tuning rear trailing arms, Bilstein HD's, StopTech BBK, Drexel LSD, Dinan camber plates, FBO's with Cobb Stage 2 tune, Corsa exhaust, 18x9 D-Force, 255/35 R-S4's
	Appreciate 0 Quote

04-04-2017, 03:14 PM	#4
E30_335i Second Lieutenant 169 Rep 212 Posts Drives: 2011 335i Join Date: Jun 2014 Location: Huntsville, AL iTrader: (0)	Stop on by. I'll be there two days. Guests are welcome and free admission. Look for my rig, hard to miss as its the only one like it, anywhere. __________________ 2011 335i Sport, M3 control arms front/rear, ECS Tuning rear trailing arms, Bilstein HD's, StopTech BBK, Drexel LSD, Dinan camber plates, FBO's with Cobb Stage 2 tune, Corsa exhaust, 18x9 D-Force, 255/35 R-S4's
	Appreciate 0 Quote

04-04-2017, 03:22 PM	#5
Jarrod Second Lieutenant 73 Rep 236 Posts Drives: 2012 E93 335is Join Date: Nov 2016 Location: SE USA iTrader: (0)	Sold. If I can get away this weekend I will check it out. Love your rig - you are doing it right!
	Appreciate 0 Quote

04-10-2017, 08:39 AM	#7
E30_335i Second Lieutenant 169 Rep 212 Posts Drives: 2011 335i Join Date: Jun 2014 Location: Huntsville, AL iTrader: (0)	Was fantastic weekend. Next time I'm up there, earlier notice. __________________ 2011 335i Sport, M3 control arms front/rear, ECS Tuning rear trailing arms, Bilstein HD's, StopTech BBK, Drexel LSD, Dinan camber plates, FBO's with Cobb Stage 2 tune, Corsa exhaust, 18x9 D-Force, 255/35 R-S4's
	Appreciate 0 Quote

04-11-2017, 01:18 PM	#11
agent Enlisted Member 3 Rep 35 Posts Drives: 2014 535i M Sport Join Date: Mar 2017 Location: Thompson's Station, TN iTrader: (0)	Give Bret at German Motorworks a shout. If they can't do it they'll know someone who can. Love the rig Gary!
	Appreciate 0 Quote

05-08-2017, 04:54 PM	#12
Elove1515 Registered 0 Rep 1 Posts Drives: 2009 BMW 335i E93 Join Date: May 2017 Location: Nashville Tennessee iTrader: (0)	New to Nashville and just bought my first BMW an '09 335i E93!! would love to find out about any meets or anything in the area. I just bought a Carly coder and the app as well. Im excited to try that out! also bought two cone air intakes and doing a dyi air filter switch as well!
	Appreciate 0 Quote

05-17-2017, 08:54 PM	#14
TN8Shooter New Member 0 Rep 19 Posts Drives: 2013 335i Coupe Join Date: May 2017 Location: Nashville iTrader: (0)	Live near Nashville, and just bought my 1st BMW. Love my '13 335i E92 coupe so far.
	Appreciate 0 Quote

02-04-2018, 12:07 PM	#15
Emilime75 Colonel 1209 Rep 2,476 Posts Drives: 2010 335i E92 LeMans Blue Join Date: Dec 2017 Location: Merica! iTrader: (1)	Hey, guys. Also a new(once again, after many years) BMW owner. Bought myself a Christmas present, a 2010 E92 LeMans Blue 335i. A good buddy of mine has an F10 M5. Would love to meet up with some local people, especially if you're into DIY and modding your car, as I am and will slowly be doing things to it. PS I've been meaning to make it up to the NCM track for quite a while. Are there any spectator areas throughout the track for people to watch the events? All I ever see in videos is corner workers and their little shade huts.
	Appreciate 0 Quote