|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Someone please tell me where the camber adjustment bolt is located on the e90?
|
|
11-26-2012, 10:23 PM | #2 |
Major
64
Rep 1,087
Posts
Drives: 2006 BMW 325i
Join Date: Apr 2011
Location: Hot Springs, AR
|
Front you need to drill out the alignment pin to allow adjustment. After it's removed, the tophat bolts are loosened and adjusted.
For the rear you need to loosen and rotate the rear lower control arm bolt.
__________________
|
Appreciate
0
|
11-26-2012, 11:12 PM | #3 | |
Private First Class
11
Rep 157
Posts |
Quote:
now for the rear, once I loosen it a bit, how do I know which way the camber is being adjusted if nothing budges? I know I have to be doing something wrong,I just dont know what.. Thanks for the input dude! appreciate it! |
|
Appreciate
0
|
11-26-2012, 11:27 PM | #4 |
Major
64
Rep 1,087
Posts
Drives: 2006 BMW 325i
Join Date: Apr 2011
Location: Hot Springs, AR
|
On the rear, loosen the nut holding the eccentric bolt. Once loose, take your wrench and rotate the bolt itself. The bolt will only rotate out so far before it begins to come back in. Once you get it to where you want, hold the bolt in place and tighten the nut back down. I believe it is 122ft.lbs. to torque spec.
__________________
|
Appreciate
0
|
11-26-2012, 11:45 PM | #5 | |
Private First Class
11
Rep 157
Posts |
Quote:
I'll go try it out and see how it works! |
|
Appreciate
0
|
11-27-2012, 12:00 AM | #6 | |
Private First Class
11
Rep 157
Posts |
Quote:
|
|
Appreciate
0
|
11-27-2012, 12:05 AM | #7 | |
Private First Class
11
Rep 157
Posts |
Quote:
edit: CAN NOT LOOSEN THE ECCENTRIC. but I am able to tighten it Last edited by nooneknowslmao; 11-27-2012 at 12:26 AM.. |
|
Appreciate
0
|
11-27-2012, 07:21 AM | #8 | |
Major
146
Rep 1,160
Posts |
Quote:
Guess you're saying: It's already loose, a major problem. How are you measuring camber? How are you measuring toe? You must be aware that you should check toe after a camber adjust. _________________________________________________ TORQUES FRONT - 3 strut top mount nuts 25.07 ft lb -- 34 NM REAR - Camber Arm @ subframe 121.6 ft lb -- 165 NM . Last edited by CALWATERBOY; 11-27-2012 at 07:28 AM.. |
|
Appreciate
0
|
Bookmarks |
|
|