|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Help needed with couple of DSC errors
|
|
09-10-2015, 10:31 AM | #1 |
Private First Class
8
Rep 104
Posts |
Help needed with couple of DSC errors
i have been getting this error since a while now on my '06 330i E90. I have Carley app and wifi obd scanner. Everytime I scan the car the following two error pops up. Even after I delete it comes right back. Btw, I have no lights on dashbord. Cruise works on and off. The codes are:
005DCC- Pressure sensor is defective right 005DBC- Pressure sensor is defective left rear I also followed $0.02 steering angle fix and resoldered the board and cleaned the disk, still looks like no luck. Any help is greatly appreciated. Thank you all Last edited by freak1; 09-13-2015 at 11:25 PM.. |
09-14-2015, 05:32 AM | #3 |
General
17309
Rep 18,733
Posts |
Not familiar with your brand of software, but regardless, an OBDII scan tool would not pick up on DSC errors anyway. If you are having stability and traction control issues it is most likely a wheel speed sensor, which I think is what your software is trying to tell you. It is probably mis-translating "pressure" with "pulse" Some software packages call the wheel speed sensor a "pulse sensor", because the sensor generates a pulse message when it counts the wheel speed.
Replace both sensors and see what happens.
__________________
A manual transmission can be set to "comfort", "sport", and "track" modes simply by the technique and speed at which you shift it; it doesn't need "modes", modes are for manumatics that try to behave like a real 3-pedal manual transmission. If you can money-shift it, it's a manual transmission. "Yeah, but NO ONE puts an automatic trans shift knob on a manual transmission."
|
Appreciate
0
|
09-14-2015, 09:19 AM | #4 | |
Private First Class
8
Rep 104
Posts |
Quote:
Thanks again |
|
Appreciate
0
|
10-25-2015, 11:36 PM | #5 |
Private First Class
8
Rep 104
Posts |
I replaced both the sensors and still same issue. Replaced battery with AGM and coded and registered. Scanned again and still same error. Here's the pic.
Any insight is highly appreciated Are these readings normal? Above are the numbers without pressing brake pedal and following are the numbers when I press brake pedal. Couple of pics with error- Any help is greatly appreciated. Thank you |
Appreciate
0
|
Bookmarks |
|
|