Quick ? on Rev II valet speed limiter

e320m3 · 09-20-2009, 05:49 PM

I loaded up the posted 9-9 maps, latest firmware, and UI; everything works great incl the DTC map switching.

Trying to use the valet speed limiter, I could not get it to limit the speed. My settings:
-Valet speed limit 25%
-Valet mode in user adjustables set to OFF
-Speed delimiter in user adjustables set to ON
It is supposed to limit speed to 155 x .25 ~ 39mph, but does not limit at all.

Do I need to set valet mode to ON in user adjustables? I did not since, even with it off, I can get to valet via the DTC switching. Thanks.

OpenFlash · 09-20-2009, 05:56 PM

Quote:

Originally Posted by e320m3

I loaded up the posted 9-9 maps, latest firmware, and UI; everything works great incl the DTC map switching.

Trying to use the valet speed limiter, I could not get it to limit the speed. My settings:
-Valet speed limit 25%
-Valet mode in user adjustables set to OFF
-Speed delimiter in user adjustables set to ON
It is supposed to limit speed to 155 x .25 ~ 39mph, but does not limit at all.

Do I need to set valet mode to ON in user adjustables? I did not since, even with it off, I can get to valet via the DTC switching. Thanks.

With the new 9-9 beta maps, the valet speed limit feature is disabled. Just temporarily until we release the new user software. The DTC mapswitching feature required that we changed a few things as we don't want a user toggling through valet (with a 30mph speedlimit) while driving on the highway at 70mph.

Shiv

scottp999 · 09-20-2009, 05:58 PM

Quote:

Originally Posted by shiv@vishnu

With the new 9-9 beta maps, the valet speed limit feature is disabled. Just temporarily until we release the new user software. The DTC mapswitching feature required that we changed a few things as we don't want a user toggling through valet (with a 30mph speedlimit) while driving on the highway at 70mph.

Shiv

Makes alot of sense. Glad to hear you got that one covered

FotiosF90M5 · 09-20-2009, 06:07 PM

Quote:

Originally Posted by shiv@vishnu

With the new 9-9 beta maps, the valet speed limit feature is disabled. Just temporarily until we release the new user software. The DTC mapswitching feature required that we changed a few things as we don't want a user toggling through valet (with a 30mph speedlimit) while driving on the highway at 70mph.

Shiv

curious as to what would happen...lol

joec500 · 09-20-2009, 06:39 PM

Quote:

Originally Posted by fotios335i

curious as to what would happen...lol

This!!!!

AltecBX · 04-05-2010, 07:07 PM

Shiv, did you get a work around this already?

09-20-2009, 05:49 PM	#1
e320m3 Enlisted Member 1 Rep 33 Posts Drives: 335i Join Date: Jul 2009 Location: NYC iTrader: (1)	Quick ? on Rev II valet speed limiter I loaded up the posted 9-9 maps, latest firmware, and UI; everything works great incl the DTC map switching. Trying to use the valet speed limiter, I could not get it to limit the speed. My settings: -Valet speed limit 25% -Valet mode in user adjustables set to OFF -Speed delimiter in user adjustables set to ON It is supposed to limit speed to 155 x .25 ~ 39mph, but does not limit at all. Do I need to set valet mode to ON in user adjustables? I did not since, even with it off, I can get to valet via the DTC switching. Thanks.
	Appreciate 0 Tweet Quote

04-05-2010, 07:07 PM	#6
AltecBX Colonel 324 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Shiv, did you get a work around this already? __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote