|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
ISTA-P 2.53.5.003 Native for K+DCAN
|
|
11-18-2014, 04:15 PM | #1 |
Colonel
529
Rep 2,503
Posts |
ISTA-P 2.53.5.003 Native for K+DCAN
This has been available for a couple of months now but thought I'd share the info here.
It is now easily possible to have ISTA-P and ISTA-D running natively on a modest laptop without multiple virtual machines. Although slightly out of date, software is now at v54 I believe, it's very powerful. I still use Standard Tools for most things but ISTA-D is a great diagnostic tool. The native install can be updated by simply replacing the ISTAP folder from a newer version. WSM will not be updated of course and ISPI NEXT will soon take over anyway. Best of all, both work with a £30 K+DCAN cable. Albeit ISTA-P will require a free ICOM Emulator. I have tested this on a 500gb HDD 8gb RAM laptop running win7 x64. Results are very good. Don't worry about ISTA-P MOST requirement. With expert mode you can select which modules you program. Download is via torrent: Torrent link for ISTA-P: https://drive.google.com/file/d/0B0h...p=docslist_api ICOM Emulator Registration XMLS: Link Magnet Link for ICOM Emulator: magnet:?xt=urn:btih408C34EB285E48CB3AB61C1448911 9C836BC50C&dn=BMW%20ICOM%20emulator%20v3.1%20Rev%2 8b%29&tr=http%3a%2f%2fbt3.rutracker.org%2fann%3fuk %3dTsC40pcY55&tr=http%3a%2f%2fretracker.local%2fan nounce --------- Below is copied from another forum, I don't take any credit for it, but happy to answer queries. Instructions: Works on XP, Windows 7, Windows 8, Windows 8.1 & Windows 10 (32bit/64bit) Notes: Unblock the rar archive before extracting i.e right click > properties > click "unblock". Use WinRAR V5 to extract. Ediabas 7.3 needs to be installed Disable firewall to avoid blocking issues - This is not needed as you can allow all service requests access when the popup appears. Voltage constant has been added - to remove this form Emulator use: --------- Delete IFS.ServicesImplementation.dll in: \apps\ISTA-P\Taurus\ISOM\bin\ then rename _orig_IFS.ServicesImplementation.dll to IFS.ServicesImplementation.dll ----------- Compatible with Chinese ICOM A1 & ICOM A2, Original ICOMs and Emulator will need registering Basic Instructions: ***Setup your HDD into 3 partitions C - D - E*** C or D can be used as the main install location. If you choose C for main install then D and E need only be 2GB partitions. 1. Put the large "apps" folder in the root directory of disk C: C:\apps 2. Copy the file "WindowCleaner.exe" to C:\Windows\System32\ 3. Copy the "ISIS" folder to C:\ProgramData\ Note: ProgramData folder may be hidden. If so go to folder options in control panel to unhide. 4. Copy the "WorkUser" folder to C:\Users\ 5. Copy the files START-ISTA.exe and STOP-ISTA.exe to your desktop 6. Rename your Network Card to "Eth0" 7. Write down your PC network card mac address and in file: D:\apps\WSM\apps\agent\data\DeviceInventory-ISTA_P_53_5_000.xml change the mac address to match your own 8. Run "Setup.exe" as administrator (also disable your firewall/temporarily disable anti virus) 9. Restart your computer Notes: Register your ICOM if needed (ICOM A1 clone is already set up). Start ISTA using icon on desktop. **YOU MUS USE 'STOP-ISTA.EXE' after closing the application. -------------- How to run ISTAP native with K+DCAN interface using ICOM emulator 1. Disable firewall. 2. Remove voltage constant. 3. Extract and copy the ICOM emulator xml files to: *:\apps\wsm\apps\agent\data\ 4. In VMware network editor, ensure "VMnet0" is set to "bridged" and your LAN network adaptor is selected in the drop down menu. 5. In VMware network editor, add a new network called "VMnet3" and set it up as shown in the picture below: Note: Click "apply" and "ok" and close down VMware. 6. Open VMware again and start emulator using the k+dcan snapshot. Once it has loaded up, go to the vm settings and change network adaptor 1 to "VMnet3(host only)". Click "ok" then wait 30 seconds for network to re-initialise. note: you can now create new snapshot if you want. 7. Connect K+DCAN cable to emulator and car and run "ifhsrv32" using icon on emulator desktop. note: ensure k+dcan cable usb icon is active in the vm. 8. Start ISTAP native, start a session and choose "ICOM emulator" in connection manager screen. note: if everything is ok, the led on your cable should start to flash after a minute or so. If not, recheck emulator settings (i.e. com9, latency timer set to 1 etc.). Last edited by Sensible_; 11-25-2014 at 03:48 AM.. |
11-20-2014, 01:35 PM | #2 | |
Captain
60
Rep 675
Posts |
Is ISTA /D included in the package?
I saw some install guides floating around but they seem to be valid for ICOM. It would be nice if we have a guide suitable for K+DCAN. Thanks PS: Your inbox is full Quote:
|
|
Appreciate
0
|
11-20-2014, 01:39 PM | #3 |
Colonel
529
Rep 2,503
Posts |
No, however ISTA-D Rheingold is freely available online and uses EDIABAS directly without the need of ICOM emulation.
The instruction for ICOM emulator is exactly the same. However you will have a red dot next to the ICOM emulator in connection manager. To get a green dot you need to register it by creating a couple of xml files. It's pretty straight forward. |
Appreciate
0
|
11-24-2014, 01:50 PM | #5 |
Captain
33
Rep 648
Posts |
Sensible, do you have an email? I can't PM you for some reason. nate5ks@gmail.com
|
Appreciate
0
|
11-25-2014, 02:21 AM | #7 |
Colonel
529
Rep 2,503
Posts |
My time is a little limited at the moment. So right now I think it's best if people go by the txt file instructions in the package and ask any install related questions in this thread?
I've updated post 1 with torrent links... |
Appreciate
0
|
12-02-2014, 10:11 AM | #8 |
Gateropode
329
Rep 2,848
Posts |
The archive do open only with WinRAR v5 which is a pay for program. Very annoying when there are so many better compression option that are open source. Just so you know, 7zip will fail opening the files with some very unclear error, took me 2 hours to figure. http://www.ghacks.net/2013/04/29/win...-need-to-know/
|
Appreciate
0
|
12-02-2014, 05:18 PM | #10 |
Gateropode
329
Rep 2,848
Posts |
Nop, it does decompress fine with Winrar v5, but it's a trial version. Works for 10 days or so. Anyway, didn't meant to sound ungrateful, just giving a warning that the archive may look corrupted, they are not, you just need to use the winrar program (and none other).
|
Appreciate
0
|
12-09-2014, 03:10 AM | #14 |
Enlisted Member
49
Rep 30
Posts |
The download is already 35Gb, so I wondered what the total size of the install (main partition A) will be in the end. For B and C it's adds another 2+2Gb.
|
Appreciate
0
|
12-09-2014, 03:13 AM | #15 |
Enlisted Member
49
Rep 30
Posts |
Also interesting would be if this works with the one-stop-shop-cable (http://www.one-stop-electronics.com/...&product_id=16) for sure, as a lot of people here bought this expensive adapter because it works with all BMW software.
|
Appreciate
0
|
12-09-2014, 06:19 PM | #18 |
First Lieutenant
123
Rep 339
Posts |
There isn't anything to actually click on like there normally is for this type of link.
|
Appreciate
0
|
12-10-2014, 07:09 PM | #20 |
First Lieutenant
123
Rep 339
Posts |
Ok I'm starting to feel a little silly, however I keep getting this error. I'm sure to remove all spaces from when I paste it in. Is there a direct torrent link anyone has??
|
Appreciate
0
|
12-11-2014, 05:39 PM | #21 |
First Lieutenant
123
Rep 339
Posts |
Sensible_ thanks for the link however the one you sent me is for ISTA-P. (Your box is full).
|
Appreciate
0
|
Bookmarks |
|
|