Jlevi SW | AA Performance Products - BMW 3-Series (E90 E92) Forum

BMW E90 · 02-25-2008, 05:15 PM

Hi guys,

OK. So here’s the situation: BMW builds this incredible go-bot called the 335i. But you’re not content with merely “incredible”. You’re chasing “stupendous”. And your friends at Active Autowerke have just the ticket to help you get there.

We are proud to announce that we're now carrying Active Autowerke's products for the E9x series. Below are some performance products for the 335.

Active Autowerke 335i/535i Blow Off Valve Kit

Key Features
High-efficiency single displacement BOV – takes place of two smaller plastic valves
Large opening can handle maximum boost, provide high flow
Proven and tested to handle 600+ HP
All aluminum venturi design with factory-style throttle clamp
CNC machined flange
Durable black powder-coated wrinkle finish
Illustrated instruction manual & installation guide for easy “Plug ‘n Play”

Active Autowerke High Flow Stainless Exhaust: BMW 335i

Key Features
-Dual 90mm stainless steel tips
-Polished 100% 304 stainless steel
-All Stainless steel hardware
-Dyno-proven
-Large inlet pipes with super high-flow design
-Illustrated instruction manual
-Limited lifetime warranty with free tech support

Active Autowerke XEDE Processor: BMW 335i

Key Features
-Proven HP and torque gains measured at the rear wheels
-Verified & tested on numerous manual and Steptronic 335i’s
-Does not throw "CHECK ENG" faults or create annoying limp conditions
-XEDE unit is small, compact and easily attached to the factory wiring harness by any competent technician
-Full control over Fuel and Boost parameters and Ignition
-System is fully-reversible, leaving no trace
-Programmable for future revision upgrades; easily transferable to another 335i
-Optional feature: VALET/RACE switch to easily control power & boost with the flip of an in-glovebox switch

Performance Specs
-Power : 55+ RWHP
-Torque : 75+ Ft lbs of Torque
-1/4 Mile : 11.8-12.9 sec

Active Autowerke 335i Intercooler Kit

There’s an old saying: “If you can’t stand the heat, get your intercooler outta the engine!”, Or something like that.

Factory intercoolers work well on factory 335i’s, but with added boost comes added heat load. To overcome this, Active Autowerke’s unit stands tall and way up front, catching more air with the help an 88% larger core and a specially designed shroud.

Our tests show an air temp drop of close to 30° F in the intake manifold, with a gain of 12 usable rear wheel HP on a Mustang MD250 dynamometer. btw: the ambient temperature in our shop measured a scorching 92°F during the session. This thing works.

Please don't hesistate to ask us any questions you may have.

Thank you,
Kenny

Edison@JleviSW · 02-26-2008, 10:52 PM

Very excited to have these up on the site

Edison@JleviSW · 03-01-2008, 05:22 PM

Blow off valve going out on Monday

Edison@JleviSW · 03-03-2008, 07:36 PM

More products added!

BMW E90 · 03-07-2008, 03:35 PM

Thank you for all the orders guys!

cipher5 · 03-07-2008, 04:05 PM

Will you guys be carrying the new Xede?

BMW E90 · 03-07-2008, 04:14 PM

Quote:

Originally Posted by cipher5

Will you guys be carrying the new Xede?

Yes sir.

Edison@JleviSW · 03-09-2008, 07:48 PM

We'll be carrying the entire lineup

MikeM5 · 03-10-2008, 02:03 AM

do u guys have information on the new xede?

Edison@JleviSW · 03-10-2008, 08:25 AM

Nothing specific has been released yet by AA.

Jlevi SW · 03-13-2008, 11:36 PM

Updated the info to the new Processor... new pricing and photos

JL

Robmaster · 03-14-2008, 03:33 AM

what's the max. boost PSI from the AA processor??

Jlevi SW · 03-17-2008, 02:28 PM

The maximum boost is 13 pounds!

Thanks
JL

Jlevi SW · 03-17-2008, 04:02 PM

Just added the new SSK to our website guys:

http://jlevistreetwerks.com/p1049/Ac...duct_info.html

Enjoy!
JL

Edison@JleviSW · 03-18-2008, 04:06 PM

Thank you all for the orders!

BMW E90 · 03-27-2008, 01:38 PM

Thanks for all the inquiries & orders guys!

SPDFAN · 03-28-2008, 12:38 AM

AA Intercooler kit fit E90? In stock?

Jlevi SW · 03-30-2008, 03:21 AM

Yes and Yes

seven_227 · 03-30-2008, 03:41 AM

Do you guys have the AA Speed limiter defeat in stock?

Jlevi SW · 03-30-2008, 05:52 PM

Do you mean the Processor?
JL

seven_227 · 03-31-2008, 03:23 AM

No, the SLD?

Edison@JleviSW · 03-31-2008, 05:52 PM

Quote:

Originally Posted by seven_227

No, the SLD?

Yep, we do offer that as well

02-25-2008, 05:15 PM	#1
BMW E90 Major General Drives: E90 335i Join Date: Nov 2005 Location: Around the Bay Posts: 7,928 iTrader: (8)	Jlevi SW \| AA Performance Products Hi guys, OK. So here’s the situation: BMW builds this incredible go-bot called the 335i. But you’re not content with merely “incredible”. You’re chasing “stupendous”. And your friends at Active Autowerke have just the ticket to help you get there. We are proud to announce that we're now carrying Active Autowerke's products for the E9x series. Below are some performance products for the 335. Active Autowerke 335i/535i Blow Off Valve Kit Key Features High-efficiency single displacement BOV – takes place of two smaller plastic valves Large opening can handle maximum boost, provide high flow Proven and tested to handle 600+ HP All aluminum venturi design with factory-style throttle clamp CNC machined flange Durable black powder-coated wrinkle finish Illustrated instruction manual & installation guide for easy “Plug ‘n Play” Active Autowerke High Flow Stainless Exhaust: BMW 335i Key Features -Dual 90mm stainless steel tips -Polished 100% 304 stainless steel -All Stainless steel hardware -Dyno-proven -Large inlet pipes with super high-flow design -Illustrated instruction manual -Limited lifetime warranty with free tech support Active Autowerke XEDE Processor: BMW 335i Key Features -Proven HP and torque gains measured at the rear wheels -Verified & tested on numerous manual and Steptronic 335i’s -Does not throw "CHECK ENG" faults or create annoying limp conditions -XEDE unit is small, compact and easily attached to the factory wiring harness by any competent technician -Full control over Fuel and Boost parameters and Ignition -System is fully-reversible, leaving no trace -Programmable for future revision upgrades; easily transferable to another 335i -Optional feature: VALET/RACE switch to easily control power & boost with the flip of an in-glovebox switch Performance Specs -Power : 55+ RWHP -Torque : 75+ Ft lbs of Torque -1/4 Mile : 11.8-12.9 sec Active Autowerke 335i Intercooler Kit There’s an old saying: “If you can’t stand the heat, get your intercooler outta the engine!”, Or something like that. Factory intercoolers work well on factory 335i’s, but with added boost comes added heat load. To overcome this, Active Autowerke’s unit stands tall and way up front, catching more air with the help an 88% larger core and a specially designed shroud. Our tests show an air temp drop of close to 30° F in the intake manifold, with a gain of 12 usable rear wheel HP on a Mustang MD250 dynamometer. btw: the ambient temperature in our shop measured a scorching 92°F during the session. This thing works. Please don't hesistate to ask us any questions you may have. Thank you, Kenny
	Tweet

03-10-2008, 02:03 AM	#9
MikeM5 Drives: E90 M3 Join Date: Apr 2007 Location: Chicago, IL Posts: 737 iTrader: (5)	do u guys have information on the new xede? __________________ UNSCENE MEDIA GROUP

03-14-2008, 03:33 AM	#12
Robmaster Colonel Drives: 2009 MR E92 M3, E39 523i (DD) Join Date: Apr 2007 Location: Switzerland Posts: 2,441 iTrader: (2)	what's the max. boost PSI from the AA processor?? __________________

03-30-2008, 03:41 AM	#19
seven_227 Lieutenant Drives: AW e92 335i Join Date: May 2007 Location: Dubai Posts: 590 iTrader: (0)	Do you guys have the AA Speed limiter defeat in stock? __________________

03-31-2008, 03:23 AM	#21
seven_227 Lieutenant Drives: AW e92 335i Join Date: May 2007 Location: Dubai Posts: 590 iTrader: (0)	No, the SLD? __________________

02-26-2008, 10:52 PM	#2
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	Very excited to have these up on the site

03-01-2008, 05:22 PM	#3
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	Blow off valve going out on Monday

03-03-2008, 07:36 PM	#4
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	More products added!

03-07-2008, 03:35 PM	#5
BMW E90 Major General Drives: E90 335i Join Date: Nov 2005 Location: Around the Bay Posts: 7,928 iTrader: (8)	Thank you for all the orders guys!

03-07-2008, 04:05 PM	#6
cipher5 Drives: 2011 328i Sedan Join Date: Jul 2007 Location: Chicago, IL Posts: 2,567 iTrader: (10)	Will you guys be carrying the new Xede?

03-09-2008, 07:48 PM	#8
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	We'll be carrying the entire lineup

03-10-2008, 08:25 AM	#10
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	Nothing specific has been released yet by AA.

03-13-2008, 11:36 PM	#11
Jlevi SW BimmerPost Supporting Vendor Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 2942-2944 Scott Blvd. Santa Clara CA 95054 Posts: 5,248 iTrader: (7)	Updated the info to the new Processor... new pricing and photos JL

03-17-2008, 02:28 PM	#13
Jlevi SW BimmerPost Supporting Vendor Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 2942-2944 Scott Blvd. Santa Clara CA 95054 Posts: 5,248 iTrader: (7)	The maximum boost is 13 pounds! Thanks JL

03-17-2008, 04:02 PM	#14
Jlevi SW BimmerPost Supporting Vendor Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 2942-2944 Scott Blvd. Santa Clara CA 95054 Posts: 5,248 iTrader: (7)	Just added the new SSK to our website guys: http://jlevistreetwerks.com/p1049/Ac...duct_info.html Enjoy! JL

03-18-2008, 04:06 PM	#15
Edison@JleviSW BimmerPost Supporting Vendor Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara Posts: 17,034 iTrader: (13)	Thank you all for the orders!

03-27-2008, 01:38 PM	#16
BMW E90 Major General Drives: E90 335i Join Date: Nov 2005 Location: Around the Bay Posts: 7,928 iTrader: (8)	Thanks for all the inquiries & orders guys!

03-28-2008, 12:38 AM	#17
SPDFAN Private First Class Drives: E90 335i Join Date: Feb 2008 Location: Earth Posts: 74 iTrader: (0)	AA Intercooler kit fit E90? In stock?

03-30-2008, 03:21 AM	#18
Jlevi SW BimmerPost Supporting Vendor Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 2942-2944 Scott Blvd. Santa Clara CA 95054 Posts: 5,248 iTrader: (7)	Yes and Yes

03-30-2008, 05:52 PM	#20
Jlevi SW BimmerPost Supporting Vendor Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 2942-2944 Scott Blvd. Santa Clara CA 95054 Posts: 5,248 iTrader: (7)	Do you mean the Processor? JL