Optimal spacers size? - BMW 3-Series (E90 E92) Forum

richsaturday · 06-01-2008, 06:08 PM

I have an e92 and I just got new wheels 19 x 8 and 19 x 9 running on Falken FK452s 225/35 R19 and 265/30 R19. Car is on stock sport suspensions and my fenders are not rolled, but I'm planning to get KWs and roll my fenders by the end of the year. Right now, I'm a little disappointed on how my rears look, offsets on the rear are 39. My question is what would be the optimal spacers size I can use given my current wheel/tire/suspension set up with no rubbing and with unrolled fenders? 10mm or 12mm or 5mm? I was thinking 10mm considering the wheel width is 9, bit I'm not pretty sure. Also debating on which brand I should get H & R or Rogue Eng?

Thanks for you input

fotios335i · 06-01-2008, 06:36 PM

go with 10mm rogue engineering spacers. I went 15mm but I have an e90.

Gerry@bavarianx · 06-01-2008, 10:33 PM

I think the 10mm spacers would be perfect. I have a set of new H&R spacers in stock, let me know if you want a pair. I've got bolts too!!!

richsaturday · 06-02-2008, 12:24 AM

thanks

...still need to break the tie between the H&R and Rogue Engineering

va_lemon · 06-02-2008, 03:47 PM

Rogue Engineering has the bolts in black that they say is a close match for the OEM bolts. I've ordered a pair of 15mm with then black bolts but haven't received them yet.

06-01-2008, 06:08 PM	#1
richsaturday First Lieutenant Drives: '07 335i Coupe Join Date: Apr 2007 Location: Porter Ranch, CA Posts: 304 iTrader: (4)	Optimal spacers size? I have an e92 and I just got new wheels 19 x 8 and 19 x 9 running on Falken FK452s 225/35 R19 and 265/30 R19. Car is on stock sport suspensions and my fenders are not rolled, but I'm planning to get KWs and roll my fenders by the end of the year. Right now, I'm a little disappointed on how my rears look, offsets on the rear are 39. My question is what would be the optimal spacers size I can use given my current wheel/tire/suspension set up with no rubbing and with unrolled fenders? 10mm or 12mm or 5mm? I was thinking 10mm considering the wheel width is 9, bit I'm not pretty sure. Also debating on which brand I should get H & R or Rogue Eng? Thanks for you input __________________
	Tweet

06-01-2008, 06:36 PM	#2
fotios335i Major General Drives: 12 BSM F30 sportline 335i Join Date: Jan 2007 Location: cape cod MA Posts: 6,370 iTrader: (61)	go with 10mm rogue engineering spacers. I went 15mm but I have an e90. __________________ 2012 335i sportline/Msport, M adaptive and vss, sport 8 AT, fully loaded, Black saphire, black dakota leather, M performance front grills, M performance shifter, M performance rear spoiler, M performance power kit, M performance exhaust, 19" 401's, morr vs8.2's coming someday..., front aero lip & more coming....

06-02-2008, 12:24 AM	#4
richsaturday First Lieutenant Drives: '07 335i Coupe Join Date: Apr 2007 Location: Porter Ranch, CA Posts: 304 iTrader: (4)	thanks...still need to break the tie between the H&R and Rogue Engineering __________________

06-02-2008, 03:47 PM	#5
va_lemon Enlisted Member Drives: 335i Coupe Join Date: Nov 2007 Location: Old Town Alexandria Posts: 36 iTrader: (0)	Rogue Engineering has the bolts in black that they say is a close match for the OEM bolts. I've ordered a pair of 15mm with then black bolts but haven't received them yet. __________________ 2008 335i Coupe - Monaco Blue \| Saddle Brown \| Gray Poplar European Delivery April 18-28 2008 http://www.hhonthenet.com/gallery/europe2008/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-01-2008, 10:33 PM	#3
Gerry@bavarianx Drives: BMW E30 Join Date: Jul 2007 Location: Yorba Linda, CA Posts: 1,696 iTrader: (20)	I think the 10mm spacers would be perfect. I have a set of new H&R spacers in stock, let me know if you want a pair. I've got bolts too!!!