12 more v3.0 maps posted - BMW 3-Series (E90 E92) Forum

shiv@vishnu · 09-12-2008, 02:22 PM

Here: http://www.vishnutuningforum.com/for...=2834#post2834

Just posted up new versions of the current v3.0 9-5-08 maps. The only difference is that they default to Map2 (full boost map) upon start-up. So no need to press any buttons on the remote control keyfob to run full boost.

12 more maps with traction/torque nanny enabled to be posted within the next 24hrs. And some more after that...

Note: The 7-11 maps have been removed and replaced with the newer 9-5 maps. And they have dropped their "beta" status. Currently, there are no beta maps available.

Cheers,
shiv

stillclaimndp · 09-12-2008, 02:31 PM

12 maps... maybe ill have to go buy a 335i this weekend.

jpsimon · 09-12-2008, 02:31 PM

ah exactly what I was looking for! thanks

retrodrive · 09-12-2008, 02:33 PM

Cant wait to try them!

getInline · 09-12-2008, 02:41 PM

Nice, except I'll stick with my current 9-5 map which defaults to the low boost map. My wife still doesn't know I have a tune and I don't want her to kill herself.......hmmmmmmmmm...I kid, I kid!

Soni · 09-12-2008, 02:48 PM

Let me get this straight!! when I start the car, it will default as Map 2 which is the higher boost map. Then if I press off on the remote, it will switch to map 1 the lower boost map??

sajakh · 09-12-2008, 03:37 PM

So how many maps are we looking at . . .12 . 18 . 24? Is there such thing as too many choices

Me? I just want the freaking lag fix map

ezatnova · 09-12-2008, 03:48 PM

Will we hear about your reasoning for this soon?
"-All Doomsday maps are limited to 10-11psi until ~4500rpm and then ramp upwards after that. We are a bit more cautious than others when it comes to 29.2 and up diagnostics. For reasons that will be revealed soon. "

sflgator · 09-12-2008, 03:49 PM

Quote:

Originally Posted by sajakh

So how many maps are we looking at . . .12 . 18 . 24? Is there such thing as too many choices

Me? I just want the freaking lag fix map

Are you seriously complaining about having more choices and more user-defined capabilities?

That's one major positive attribute that separates the PROcede v3 with the other piggybacks out there.

If you weren't serious, then sorry, I misunderstood; hope you get your lag problem fixed. I thought Shiv said that these new maps help alleviate the lag issue.

cstmx_ryder · 09-12-2008, 03:51 PM

So what if I'm running the 9-5 beta map prior to this release, and I'm not using the remote, so upon start up, which map does it default to?

I'm guessing it defaults to the map I have loaded, which is the beta 9-5/stg. 2/Non-doomsday?

Thanks,

sajakh · 09-12-2008, 03:52 PM

Quote:

Originally Posted by sflgator

Are you seriously complaining about having more choices and more user-defined capabilities?

That's one major positive attribute that separates the PROcede v3 with the other piggybacks out there.

Sarcasm in print, my friend

sflgator · 09-12-2008, 03:54 PM

Quote:

Originally Posted by sajakh

Sarcasm in print, my friend

My post edited; sorry, I misunderstood.

jpsimon · 09-12-2008, 04:05 PM

Shiv, just went and tested this out. Wastage actuator rattle is now gone, power is buttery smooth! Feels great!!

shiv@vishnu · 09-12-2008, 04:06 PM

Quote:

Originally Posted by Soni

Let me get this straight!! when I start the car, it will default as Map 2 which is the higher boost map. Then if I press off on the remote, it will switch to map 1 the lower boost map??

Yes. Will default to higher boost map (map2). To activate lower boost (map1), you will need need to hit the "OFF" button.

shiv

shiv@vishnu · 09-12-2008, 04:10 PM

Quote:

Originally Posted by cstmx_ryder

So what if I'm running the 9-5 beta map prior to this release, and I'm not using the remote, so upon start up, which map does it default to?

I'm guessing it defaults to the map I have loaded, which is the beta 9-5/stg. 2/Non-doomsday?

Thanks,

When you say that you "are not running the remote", do you mean that you don't have it plugged in to the PROcede harness or that you just aren't pressing the buttons on the keyfob.

Because I'm pretty sure the directions say that you need to keep the remote relay box plugged into the harness

Not plugging anything in can cause the PROcede to switch maps randomly.

But if is plugged in and you are not pressing any button the keyfob then you are running around on the low boost map.

Shiv

335lvr · 09-12-2008, 04:14 PM

Quote:

Originally Posted by ezatnova

Will we hear about your reasoning for this soon?
"-All Doomsday maps are limited to 10-11psi until ~4500rpm and then ramp upwards after that. We are a bit more cautious than others when it comes to 29.2 and up diagnostics. For reasons that will be revealed soon. "

+1:
And:"Also, if you are running a Doomsday version of the map (and presumably have had your ECU updated with BMW software 29.2 or later), do NOT raise the User Torque levels. It could negatively effect the PROcede's diagnostic invisibility."

Do not raise past 80% or 85%?

IMHO, no need for traction nanny for the doomsday maps...at least at this point.

cstmx_ryder · 09-12-2008, 04:14 PM

um.....well, I have the remotes, but am not using it. I also didn't plug it into the harness, I believe. Because when I was watching the installation video, it said if I plan on using the remote, then it's a good time to plug it in right now. This was said right before everything was put back together, after testing that there's no codes post V3 install..........

shiv@vishnu · 09-12-2008, 04:27 PM

Quote:

Originally Posted by 335lvr

+1:
And:"Also, if you are running a Doomsday version of the map (and presumably have had your ECU updated with BMW software 29.2 or later), do NOT raise the User Torque levels. It could negatively effect the PROcede's diagnostic invisibility."

Do not raise past 80% or 85%?

IMHO, no need for traction nanny for the doomsday maps...at least at this point.

With Doomsday, no not raise them above the default value of 80%. Just for the next week or so. Will have something soon

Shiv

335lvr · 09-12-2008, 04:28 PM

Quote:

Originally Posted by shiv@vishnu

With Doomsday, no not raise them above the default value of 80%. Just for the next week or so. Will have something soon

Shiv

Okie-Dokie

cstmx_ryder · 09-12-2008, 07:44 PM

Shiv,

Do you have the installation video somewhere, it's not on youtube anymore. I want to see where to plug in the relay harness......

Thanks

shiv@vishnu · 09-12-2008, 07:52 PM

Quote:

Originally Posted by cstmx_ryder

Shiv,

Do you have the installation video somewhere, it's not on youtube anymore. I want to see where to plug in the relay harness......

Thanks

Dustin is making a couple of edits to the video. Give it a bit... it'll be back up soon

But to answer your question, there is no relay harness to plug in (assuming your are talking about the clear relay that is already integrated into the harness.) If you are talking about the black remote control receiver/relay box, then there is only one place to plug it in. Kinda eliminates options

Shiv

scalbert · 09-12-2008, 07:54 PM

So how do I install the update if I don't hook up the USB cable???

09-12-2008, 02:22 PM	#1
shiv@vishnu BimmerPost Supporting Vendor Drives: PROcede v5 Join Date: Sep 2006 Location: SF Bay, CA Posts: 16,687 iTrader: (0)	12 more v3.0 maps posted Here: http://www.vishnutuningforum.com/for...=2834#post2834 Just posted up new versions of the current v3.0 9-5-08 maps. The only difference is that they default to Map2 (full boost map) upon start-up. So no need to press any buttons on the remote control keyfob to run full boost. 12 more maps with traction/torque nanny enabled to be posted within the next 24hrs. And some more after that... Note: The 7-11 maps have been removed and replaced with the newer 9-5 maps. And they have dropped their "beta" status. Currently, there are no beta maps available. Cheers, shiv
	Tweet

09-12-2008, 02:31 PM	#2
stillclaimndp Dancing Machine Drives: 335i e90 ZSP Join Date: Aug 2007 Location: Walnut Creek, Ca Posts: 1,419 iTrader: (0)	12 maps... maybe ill have to go buy a 335i this weekend. __________________ 2007 e90 & 1981 Corvette Predecessors: 2007 BMW 335i E92, 2006 M5, 2008 Viper SRT10 Coupe, 2005 Viper Yellow, 2006 Corvette Z51, 2009 Challenger SRT8, 2006 S4, 2001.5 Nogaro Blue S4, 2006 GTI w/ DSG, 06 Evo IX, 04 S4, 04 911x51, 03 Evo VIII, 98 Eclipse GSX, 96 GST, 92 Galant Vr-4, '70 Grand Prix Model J, '70 Nova, '68 Firebird

09-12-2008, 02:31 PM	#3
jpsimon Team Zissou Drives: 335xi Coupe 6MT Join Date: Dec 2006 Location: CT Posts: 8,769 iTrader: (3)	ah exactly what I was looking for! thanks __________________ PROcede+Cobb, thule flat-top 6 ski rack, VTT Stg.2 Turbos, PWM meth + ADVAN in-boot meth tank, AMS fmic, catless (ur+ae), SPEC clutch/flywheel, KW V3 coilovers, etc etc etc...

09-12-2008, 03:51 PM	#10
cstmx_ryder Colonel Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR Posts: 2,540 iTrader: (2)	So what if I'm running the 9-5 beta map prior to this release, and I'm not using the remote, so upon start up, which map does it default to? I'm guessing it defaults to the map I have loaded, which is the beta 9-5/stg. 2/Non-doomsday? Thanks, __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10

09-12-2008, 04:05 PM	#13
jpsimon Team Zissou Drives: 335xi Coupe 6MT Join Date: Dec 2006 Location: CT Posts: 8,769 iTrader: (3)	Shiv, just went and tested this out. Wastage actuator rattle is now gone, power is buttery smooth! Feels great!! __________________ PROcede+Cobb, thule flat-top 6 ski rack, VTT Stg.2 Turbos, PWM meth + ADVAN in-boot meth tank, AMS fmic, catless (ur+ae), SPEC clutch/flywheel, KW V3 coilovers, etc etc etc...

09-12-2008, 02:33 PM	#4
retrodrive Lieutenant Colonel Drives: 335i Join Date: Jan 2007 Location: Irvine, CA Posts: 1,938 iTrader: (8)	Cant wait to try them!

09-12-2008, 02:41 PM	#5
getInline First Lieutenant Drives: 2008 335 Coupe, c32 AMG Join Date: Nov 2007 Location: Parts Unknown Posts: 390 iTrader: (1)	Nice, except I'll stick with my current 9-5 map which defaults to the low boost map. My wife still doesn't know I have a tune and I don't want her to kill herself.......hmmmmmmmmm...I kid, I kid!

09-12-2008, 02:48 PM	#6
Soni Major General Drives: Just a car Join Date: Feb 2007 Location: CANADA eh! Posts: 8,378 iTrader: (35) Garage List 2007 335i Coupe [4.50]	Let me get this straight!! when I start the car, it will default as Map 2 which is the higher boost map. Then if I press off on the remote, it will switch to map 1 the lower boost map??

09-12-2008, 03:37 PM	#7
sajakh First Lieutenant Drives: e92 335i Join Date: Nov 2006 Location: South Posts: 342 iTrader: (0)	So how many maps are we looking at . . .12 . 18 . 24? Is there such thing as too many choices Me? I just want the freaking lag fix map

09-12-2008, 03:48 PM	#8
ezatnova Colonel Drives: C63 AMG Join Date: Jan 2006 Location: West Chester, PA Posts: 2,188 iTrader: (5)	Will we hear about your reasoning for this soon? "-All Doomsday maps are limited to 10-11psi until ~4500rpm and then ramp upwards after that. We are a bit more cautious than others when it comes to 29.2 and up diagnostics. For reasons that will be revealed soon. "

09-12-2008, 04:14 PM	#17
cstmx_ryder Colonel Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR Posts: 2,540 iTrader: (2)	um.....well, I have the remotes, but am not using it. I also didn't plug it into the harness, I believe. Because when I was watching the installation video, it said if I plan on using the remote, then it's a good time to plug it in right now. This was said right before everything was put back together, after testing that there's no codes post V3 install.......... __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10

09-12-2008, 07:44 PM	#20
cstmx_ryder Colonel Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR Posts: 2,540 iTrader: (2)	Shiv, Do you have the installation video somewhere, it's not on youtube anymore. I want to see where to plug in the relay harness...... Thanks __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10

09-12-2008, 07:54 PM	#22
scalbert Major General Drives: '08 E90 M3, '13 Volt, '08 Ody Join Date: Feb 2007 Location: Woodstock, GA Posts: 5,634 iTrader: (6)	So how do I install the update if I don't hook up the USB cable???

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search