[shiv@vishnu]

STD Corrected peak power (at ~5900rpm): 417whp/396lbft Uncorrected: 425whp/405lbft
Max Boost: 15psi as per datalog. 14.5psi on the gauge.
Max Wastegate DC: 63%
Power at 6700rpm (just before rev limit induced throttle closure): 400whp

Points of interest:

-This is on our shop car with full stg 3 mods (Helix FMIC, full catless dp/exhausts and vishnu intakes)

-The knock surpression characteristics of methanol are, as expected, excellent. I'm actually using the PROcede to ADD ignition advance under boost.

-When methanol is injecting under boost, IATs actually drop from ~25 deg C to 11 deg C.

-Ignition system is showing it's limitations above 6500rpm due to charge density and power output. Will sometimes get a high RPM misfire. I have some upgraded spark plugs that I'm going to try next. Yes, they are gap-able

-I've mapped all the fuel pressure, timing, and fuel maps so that the stock DME's adaptation values are what they would be when running straight 91oct on the pump gas map. This means that in the case of a meth injection failure, the PROcede will immediately switch map and the ECU shouldn't even hiccup/knock/require adaption for safe running/etc,. I'm not gutsy enough to try it just yet though

-Once I test the failsafe system to work properly, I'm going to try a larger jet and go for a bit more power. Then I'm going to make a Meth+Race gas map and see how much power the car will make.

But so far, I'm happy with the results. It's making the same power as we've made with straight MS109 race gas. But with even better consistency, cooler intake charge, lower calculated fuel consumption (to avoid triggering warranty code) and LESS boost. If we can make it safe to run, it's a big win/win. Even after 20 runs, the meth level in the trunk-mounted tank didn't drop visibly.

Here are some dyno results...

Uncorrected results:


STD Corrected results:


And, for those who care, this is with smoothing set to zero:


Here's a PROcede datalog of one of those runs:


Here's a OBD2 log of ignition timing vs. RPM:


Cheers,
shiv

[RiXst3r]

Nice... thats awesome for 91 oct pump gas!

[TMR]

Can i buy one now?

[O-cha]

This is on a car with the works right.

[shiv@vishnu]

I'll post a bunch of grapsh/logs/pics on our blog later today.

Cheers,
shiv

[nj335i]

Impressive! Waiting to see more results!

[ichiban]

nice

[Hunter399]

Awesome!

[GeorgiaTech335coupe]

Great preliminary results. Can't wait to get the finalized data. Seems like a cheap alternative (I hope!) to running race gas.

[jpsimon]

very nice! 417whp on 91.. and you still have to try a larger jet. Race gas + meth is gonna be redic

[GeorgiaTech335coupe]

Originally Posted by shiv@vishnu

-I've mapped all the fuel pressure, timing, and fuel maps so that the stock DME's adaptation values are what they would be when running straight 91oct on the pump gas map. This means that in the case of a meth injection failure, the PROcede will immediately switch map and the ECU shouldn't even hiccup/knock/require adaption for safe running/etc,.

Can you clarify this statement? I think I understand what you are saying, but I'd like to be sure.

[BOOST3D]

[JoeyFiasco]

impressive considering how long you've had the meth integrated into the system. well as far as I know.

[retrodrive]

I am looking forward to the pricing of the kit. Where do you spray exactly?

[rotaz]

wow...impressive!

[RBP AW]

Awesome! funny how 400 whp used to be the big number . . . now 450 is in the near future. Props shiv

[Sniz]

thats great, cant wait to see what your final setup looks like

[srt4geezer]

curve looks great.

Was that straight meth or meth/H20 mix? How sensative is the ECU to the extra fuel? That was on an M7 nozzle & 20 runs later the tank level didn't drop? Hmmmm

[E92White]

upgraded spark plugs eh ? I wasnt aware there was such better plugs than the factory Bosch..what kind of plugs ? I wonder what you'll gap them at..

[smack]

Those are some great numbers. Wonder what it will do in the Quarter

[Sniz]

Originally Posted by srt4geezer

Bet the curve looks great.

Was that straight meth or meth/H20 mix? How sensative is the ECU to the extra fuel? That was on an M7 nozzle & 20 runs later the tank level didn't drop? Hmmmm

Love the drop in charge temps.
Weird to do all this without being able to play with boost. Is the ECU clever enough to detect a voltage clamp on the Manifold pressure sensor?
Larger compressor wheels pushing the same boost, but more flow should net more power & lower EGT's with water/meth. Maybe I'm being too simple, but I want to see big power on a F/I straight 6.

? he's playing w/ boost plenty

[GeorgiaTech335coupe]

I would like to see the AFRs as well.