M3 rear lower camber link conversion kit for all E82/E9x 1 and 3 series - BMW 3-Series (E90 E92) Forum

HP Autowerks · 03-30-2009, 11:58 PM

One of the last two remaining rear-end pieces to complete your E9X M3 suspension conversion. The other being the rear toe link, which is still under developement, but will be available soon.

This R&D process took several weeks to complete, but it is finally done and is available for ALL E82/E9X 1 and 3 series owners. Rear E9X M3 light weight alloy lower camber links will replace the heavy 135i and 335i steel counter parts. The M3 camber link is a good 2 lbs!!! lighter per unit and is much stronger in design with less flex. The dampers will be better positioned to have a quicker reaction time to bumps and no longer be in the soft and flexible 135i/335i rubber saddles. Height adjuster, coil-over style spring with spring thrust sheets will be used. although not required, but highly recommended. We offer spring rates from 400 in/lb all the way to over 1000 in/lbs(Any spring rates over 800lbs will require a custom rear damper). Dampers can be Koni single or double adjustable units valved properly to handle most of the spring rates we toss at them. AST and KW will soon be available as well.

See the full R&D write-up here:

http://www.e90post.com/forums/showthread.php?t=227480

All mounting hardware is included with the proper headlight verticle aim bracket.

Benefits:
-Light weight aluminum
-Stronger then the 335i links by design
-Less flex
-Better rear damper mounting for faster damper reaction time

If you already have Koni dampers, you can choose to replace the rear dampers only in either single or double adjustable variety. If you are on KW(May be an option at a later date), Bilstein, Tein, etc. It is our recommendation to convert to either Koni or AST at this time.

Alternatively, if you need a complete coil-over set-up, we offer AST and Koni single or double adjustable coil-over kits.

Choose our custom Swift springs for the ultimate in handling for your BMW. Swift's R & D team created material, called H5S.TW, which is stronger then regular silicone chrome material. Because of this material, they could make the spring wire thinner, and could wind the springs with fewer coils, which greatly decreased weight while dramatically increasing available stroke.

Benefits:
-Lighter Unsprung Mass
-Smoother Weight Transfer
-Better Ride Quality
-Lower Tire Temperature
-Increased ability to anticipate vehicle reaction

Price at $555.15

Orders may be placed here:

http://www.hpashop.com/product.sc?ca...3&productId=74

HP Autowerks · 04-07-2009, 01:15 AM

The AST and Koni coil-overs can be had in Single Adjust, Double Adjust or Triple Adjust(AST only).

Just about any spring rates of your choice or we can recommend one for the type of driving you do.

HP Autowerks · 05-08-2009, 12:05 PM

Full AST and TCKline Coilvers can be shipped along with the M3 rear lower camber link conversion kits.

HP Autowerks · 05-26-2009, 06:51 PM

KW coilover system with Swift springs are possible now. Serious inquiries only please.

HP Autowerks · 07-22-2009, 11:53 AM

Lower camber link conversion kits are in stock and ready to ship!

enigmaticdream · 07-23-2009, 05:10 PM

That's pretty damn cool. I wouldn't mind getting some of those hehe.

s2kdagjd · 07-24-2009, 01:24 PM

so i cant use my kw1's on this?

lpphreakx06 · 07-24-2009, 01:27 PM

^Nope.

HP Autowerks · 08-20-2009, 01:45 PM

Quote:

Originally Posted by s2kdagjd

so i cant use my kw1's on this?

Yes, if you are able to get the KW V1 E9X M3 rear dampers.

Gen_E92 · 09-24-2009, 07:56 PM

these things look serious...can't wait to put them on!

big thanks to Harold for all the great help!

Prowess Symphony · 10-02-2009, 02:16 AM

These should work on the xi, right? Since the xi rear is the same as i.

HP Autowerks · 10-02-2009, 10:28 AM

Quote:

Originally Posted by Prowess Symphony

These should work on the xi, right? Since the xi rear is the same as i.

Yes, you are correct.

Harold

HP Autowerks · 08-05-2010, 02:26 AM

We offer this kit with the correct rear verticle headlight adjusting bracket and spool pieces for Koni and AST dampers.

HP Autowerks · 08-07-2011, 03:10 AM

If you guys are looking to get these, get them now. We have seen a price hike from BMW on these M3 components. Our cost went up about $230 compare to this time last year.

HP Autowerks · 11-15-2011, 11:34 PM

Just a reminder that the rear headlight aim bracket is not a piece from the M3, it is a custom piece we have engineered. The M3 bracket will NOT work on the non-M cars due to the different rear subframe.

mjollnir19 · 11-28-2011, 11:22 PM

wat is the part # of this specific part...?

HP Autowerks · 02-03-2012, 11:39 AM

Quote:

Originally Posted by mjollnir19

wat is the part # of this specific part...?

This is sold in a kit form only and has does not carry a part# that will cross to another vendor.

HP Autowerks · 07-13-2012, 11:39 PM

In stock!

HP Autowerks · 08-19-2012, 12:28 PM

Get yours here!

HP Autowerks · 12-06-2012, 07:27 PM

Bump!

HP Autowerks · 01-23-2013, 07:39 PM

Bump!

03-30-2009, 11:58 PM	#1
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	M3 rear lower camber link conversion kit for all E82/E9x 1 and 3 series One of the last two remaining rear-end pieces to complete your E9X M3 suspension conversion. The other being the rear toe link, which is still under developement, but will be available soon. This R&D process took several weeks to complete, but it is finally done and is available for ALL E82/E9X 1 and 3 series owners. Rear E9X M3 light weight alloy lower camber links will replace the heavy 135i and 335i steel counter parts. The M3 camber link is a good 2 lbs!!! lighter per unit and is much stronger in design with less flex. The dampers will be better positioned to have a quicker reaction time to bumps and no longer be in the soft and flexible 135i/335i rubber saddles. Height adjuster, coil-over style spring with spring thrust sheets will be used. although not required, but highly recommended. We offer spring rates from 400 in/lb all the way to over 1000 in/lbs(Any spring rates over 800lbs will require a custom rear damper). Dampers can be Koni single or double adjustable units valved properly to handle most of the spring rates we toss at them. AST and KW will soon be available as well. See the full R&D write-up here: http://www.e90post.com/forums/showthread.php?t=227480 All mounting hardware is included with the proper headlight verticle aim bracket. Benefits: -Light weight aluminum -Stronger then the 335i links by design -Less flex -Better rear damper mounting for faster damper reaction time If you already have Koni dampers, you can choose to replace the rear dampers only in either single or double adjustable variety. If you are on KW(May be an option at a later date), Bilstein, Tein, etc. It is our recommendation to convert to either Koni or AST at this time. Alternatively, if you need a complete coil-over set-up, we offer AST and Koni single or double adjustable coil-over kits. Choose our custom Swift springs for the ultimate in handling for your BMW. Swift's R & D team created material, called H5S.TW, which is stronger then regular silicone chrome material. Because of this material, they could make the spring wire thinner, and could wind the springs with fewer coils, which greatly decreased weight while dramatically increasing available stroke. Benefits: -Lighter Unsprung Mass -Smoother Weight Transfer -Better Ride Quality -Lower Tire Temperature -Increased ability to anticipate vehicle reaction Price at $555.15 Orders may be placed here: http://www.hpashop.com/product.sc?ca...3&productId=74 Attached Images Last edited by HP Autowerks; 08-07-2011 at 03:08 AM.
	Tweet

05-26-2009, 06:51 PM	#4
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	KW coilover system with Swift springs are possible now. Serious inquiries only please. Last edited by HP Autowerks; 05-26-2009 at 07:08 PM.

07-23-2009, 05:10 PM	#6
enigmaticdream Private First Class Drives: 2004 M3 Join Date: Jul 2009 Location: Raleigh, NC Posts: 118 iTrader: (0)	That's pretty damn cool. I wouldn't mind getting some of those hehe. __________________ 2004 M3 CB/CINN - Mostly Stock (Emmi) SOLD 2006 E90 325i - 60k (Maevb)

07-24-2009, 01:27 PM	#8
lpphreakx06 Professional Moose Racer Drives: SG 335i E92 Join Date: Jul 2008 Location: Bellevue, Wa Posts: 7,241 iTrader: (25)	^Nope. __________________ BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM

09-24-2009, 07:56 PM	#10
Gen_E92 Brigadier General Drives: slow Join Date: Oct 2006 Location: Vancouver Posts: 3,382 iTrader: (17) Garage List 2007 335i [3.88]	these things look serious...can't wait to put them on! big thanks to Harold for all the great help! Attached Images

04-07-2009, 01:15 AM	#2
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	The AST and Koni coil-overs can be had in Single Adjust, Double Adjust or Triple Adjust(AST only). Just about any spring rates of your choice or we can recommend one for the type of driving you do.

05-08-2009, 12:05 PM	#3
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Full AST and TCKline Coilvers can be shipped along with the M3 rear lower camber link conversion kits.

07-22-2009, 11:53 AM	#5
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Lower camber link conversion kits are in stock and ready to ship!

07-24-2009, 01:24 PM	#7
s2kdagjd First Lieutenant Drives: F10 550i M-Sport IB Join Date: Dec 2007 Location: LA Posts: 314 iTrader: (4)	so i cant use my kw1's on this?

10-02-2009, 02:16 AM	#11
Prowess Symphony Major General Drives: Sportage Join Date: Nov 2008 Location: WV Posts: 5,153 iTrader: (10) Garage List 2011 BMW e93 M3 -sold [0.00] 2009 BMW 335 -sold [0.00] 2013 BMW e92 M3 [0.00]	These should work on the xi, right? Since the xi rear is the same as i. __________________ 2013 e92 M3 ordered. Euro pick up on June 15th. B ///M W ---> Click For xi/xDrive Suspension Compatibility List <---

08-05-2010, 02:26 AM	#13
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	We offer this kit with the correct rear verticle headlight adjusting bracket and spool pieces for Koni and AST dampers.

08-07-2011, 03:10 AM	#14
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	If you guys are looking to get these, get them now. We have seen a price hike from BMW on these M3 components. Our cost went up about $230 compare to this time last year.

11-15-2011, 11:34 PM	#15
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	M3 camber link coversion Just a reminder that the rear headlight aim bracket is not a piece from the M3, it is a custom piece we have engineered. The M3 bracket will NOT work on the non-M cars due to the different rear subframe.

11-28-2011, 11:22 PM	#16
mjollnir19 Major Drives: BMW 335i DINAN 3 Join Date: Nov 2010 Location: NJ Posts: 1,265 iTrader: (13) Garage List 2009 BMW E90 335i LCI [4.75]	wat is the part # of this specific part...?

07-13-2012, 11:39 PM	#18
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	M3 rear control arm kit In stock!

08-19-2012, 12:28 PM	#19
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	M3 rear lower camber link conversion Get yours here!

12-06-2012, 07:27 PM	#20
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Bump!

01-23-2013, 07:39 PM	#21
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	M3 camber link conversion kit Bump!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search