Stuff was on my car, for sale - BMW 3-Series (E90 E92) Forum

cazisk · 04-11-2009, 06:29 AM

Please note that all prices below do not include shipping cost. Shipping cost to be paid by buyer. I am selling these things as I am selling my car.

-Vishnu Dual cone Filter: http://www.vishnutuning.com/bmw_dual_filter.htm
$50 - note: filters need cleaning

-Forged DV valves - SOLD
- from: www.namotorsports.net

- AR Design DPs - These are modified to fit aus right hand drive. Ask for photo if intrested as modification job wasn't the best. hence the cheap price - $300

-Cat Back - $1000
- Harman Motive/Vishnu Exhaust: http://www.vishnutuning.com/bmw_1_v380.htm

-Vishnu's Procede V3.PnP rev1 - N/A
- from: http://www.vishnutuning.com/

-Upgraded oil cooler - VK Motorwerks - N/A

- Clutch Type LSD: http://performancegearing.com/ - N/A

- Forgiato Estremo 20x8.5 and 20x10 - $5500

- vk motorwerks fmic - $500 - brand new, still waiting for shipping. -- SOLD

-Sway bar - SOLD
- UUC SwayBarbarian Sway Bar: http://www.e90post.com/forums/showth...highlight=pss9

-Vortsteiner Carbon Fibre Hood - $3000

Please note these prices are open to offers. any reasonable offers will be cosidered.

BTW guys if you dont get a reply on this site please go to:
http://stinkinsite.com

and contact me through there

I just dont come here as often any more now that Im getting a totally different car.
Thanks =)

MFKN3 · 04-13-2009, 02:35 AM

I'm keen on the intake.

How many km's has it done and are the K&N's in great condition? Also do you just clean them or replace them?
Approx shipping to 4069?

Thanks heaps.

MFKN3 · 04-13-2009, 02:41 AM

By the way, sounds like a pretty serious setup you used to run! Did you track it?

With your exhaust setup, did you run the stock mid pipes with secondary cats?

I would love to consider the fmic...but I don't think my poor bmw warranty would

WOPALX · 04-13-2009, 03:10 AM

Quote:

Originally Posted by xsboost

By the way, sounds like a pretty serious setup you used to run! Did you track it?

With your exhaust setup, did you run the stock mid pipes with secondary cats?

I would love to consider the fmic...but I don't think my poor bmw warranty would

I'd get the LSD, transforms the car!

cazisk · 04-13-2009, 08:52 PM

lol i did track it a little bit.
um I cant remember how many kms the filter's done ill take pics if you want. PM me your email

about cleaning,etc. im not so sure either. WOPLAX do you know?

WOPALX · 04-14-2009, 12:28 AM

Quote:

Originally Posted by cazisk

lol i did track it a little bit.
um I cant remember how many kms the filter's done ill take pics if you want. PM me your email

about cleaning,etc. im not so sure either. WOPLAX do you know?

Vishnu I think are an oiled filter, you'd be able to confirm it with Vishnu on their web site.

flukey · 04-14-2009, 12:40 AM

pm for fmic

WOPALX · 04-20-2009, 07:06 AM

Props to the vendor, great guy to deal with.

FYI the FMIC fitted without issue, will be doing some testing on my private track tomorrow

MFKN3 · 04-20-2009, 08:59 AM

Damn that was quick!!

You're almost stage 3 now, I am jealous!! I checked tonight and no 2nd cats, so dp and fmic to go for me and it is game on!!

NAP55U · 04-21-2009, 01:05 AM

hey does the intake fit e92 323i as well?

MFKN3 · 04-22-2009, 09:07 AM

Quote:

Originally Posted by NAP55U

hey does the intake fit e92 323i as well?

nup, it's for the twins

BMW 330i · 05-04-2009, 11:45 PM

Vortsteiner Carbon Fibre Hood - $3000

Any pics of the above?

cazisk · 05-27-2009, 03:22 AM

sorry for the very late reply but i havent been here much lately....cause im selling my car LOL but heres some pics if your still intrested

http://onion-network.com/cazblog/?page_id=114&nggpage=7

btw thx for the nice comment and for the help there guys hehe

probably better to send me and email or PM.

04-11-2009, 06:29 AM	#1
cazisk Aussie Drives: E92 335i - Saphire Black Join Date: Aug 2007 Location: Perth, Australia Posts: 85 iTrader: (0) Garage List 2006 335i (e92) [0.00]	Stuff was on my car, for sale Please note that all prices below do not include shipping cost. Shipping cost to be paid by buyer. I am selling these things as I am selling my car. -Vishnu Dual cone Filter: http://www.vishnutuning.com/bmw_dual_filter.htm $50 - note: filters need cleaning -Forged DV valves - SOLD - from: www.namotorsports.net - AR Design DPs - These are modified to fit aus right hand drive. Ask for photo if intrested as modification job wasn't the best. hence the cheap price - $300 -Cat Back - $1000 - Harman Motive/Vishnu Exhaust: http://www.vishnutuning.com/bmw_1_v380.htm -Vishnu's Procede V3.PnP rev1 - N/A - from: http://www.vishnutuning.com/ -Upgraded oil cooler - VK Motorwerks - N/A - Clutch Type LSD: http://performancegearing.com/ - N/A - Forgiato Estremo 20x8.5 and 20x10 - $5500 - vk motorwerks fmic - $500 - brand new, still waiting for shipping. -- SOLD -Sway bar - SOLD - UUC SwayBarbarian Sway Bar: http://www.e90post.com/forums/showth...highlight=pss9 -Vortsteiner Carbon Fibre Hood - $3000 Please note these prices are open to offers. any reasonable offers will be cosidered. BTW guys if you dont get a reply on this site please go to: http://stinkinsite.com and contact me through there I just dont come here as often any more now that Im getting a totally different car. Thanks =) __________________ e92 335i http://cazblog.onion-network.com Last edited by cazisk; 05-27-2009 at 03:27 AM. Reason: sold some stuff
	Tweet

04-13-2009, 08:52 PM	#5
cazisk Aussie Drives: E92 335i - Saphire Black Join Date: Aug 2007 Location: Perth, Australia Posts: 85 iTrader: (0) Garage List 2006 335i (e92) [0.00]	lol i did track it a little bit. um I cant remember how many kms the filter's done ill take pics if you want. PM me your email about cleaning,etc. im not so sure either. WOPLAX do you know? __________________ e92 335i http://cazblog.onion-network.com

04-14-2009, 12:40 AM	#7
flukey Go big or go home! Drives: E90 335xi Join Date: Jun 2007 Location: Iowa Posts: 949 iTrader: (9)	pm for fmic __________________

05-27-2009, 03:22 AM	#13
cazisk Aussie Drives: E92 335i - Saphire Black Join Date: Aug 2007 Location: Perth, Australia Posts: 85 iTrader: (0) Garage List 2006 335i (e92) [0.00]	sorry for the very late reply but i havent been here much lately....cause im selling my car LOL but heres some pics if your still intrested http://onion-network.com/cazblog/?page_id=114&nggpage=7 btw thx for the nice comment and for the help there guys hehe probably better to send me and email or PM. __________________ e92 335i http://cazblog.onion-network.com

04-13-2009, 02:35 AM	#2
MFKN3 Lieutenant Colonel Drives: E92 M3 Join Date: Nov 2008 Location: Bris Posts: 1,622 iTrader: (2)	I'm keen on the intake. How many km's has it done and are the K&N's in great condition? Also do you just clean them or replace them? Approx shipping to 4069? Thanks heaps.

04-13-2009, 02:41 AM	#3
MFKN3 Lieutenant Colonel Drives: E92 M3 Join Date: Nov 2008 Location: Bris Posts: 1,622 iTrader: (2)	By the way, sounds like a pretty serious setup you used to run! Did you track it? With your exhaust setup, did you run the stock mid pipes with secondary cats? I would love to consider the fmic...but I don't think my poor bmw warranty would

04-20-2009, 07:06 AM	#8
WOPALX Lieutenant Colonel Drives: 335i Sedan Join Date: May 2007 Location: Sydney, Australia Posts: 1,910 iTrader: (1)	Props to the vendor, great guy to deal with. FYI the FMIC fitted without issue, will be doing some testing on my private track tomorrow

04-20-2009, 08:59 AM	#9
MFKN3 Lieutenant Colonel Drives: E92 M3 Join Date: Nov 2008 Location: Bris Posts: 1,622 iTrader: (2)	Damn that was quick!! You're almost stage 3 now, I am jealous!! I checked tonight and no 2nd cats, so dp and fmic to go for me and it is game on!!

04-21-2009, 01:05 AM	#10
NAP55U New Member Drives: BMW e92 323i Join Date: Jul 2008 Location: Sydney, Australia Posts: 9 iTrader: (0)	hey does the intake fit e92 323i as well?

05-04-2009, 11:45 PM	#12
BMW 330i Drives: The wheels on the BMW goes round and round Drives: BMW 330i (E90) Join Date: Sep 2007 Location: Sydney, Australia Posts: 36 iTrader: (0)	Vortsteiner Carbon Fibre Hood - $3000 Any pics of the above?