Best Clutch Bleeding Technique for CDV

DIY: E92 Angel, Cornering and Fog Light VIDEOS

Published by Russian325is
01-09-2009

DIY: E92 Angel, Cornering and Fog Light VIDEOS

A little step by step on how to install your new angel eyes, cornering lights, and fog light bulbs. Video might be a little shaky...I didn't have any help and pretty much had to do everything with one hand while making sure I was recording the right spot.

Anyways..hope this helps.

Note:
- Never touch the glass part of the bulb. The oil from your hands can make it pop when you turn them on.
- And..both of the angel eyes turn clockwise to remove (if seen from the front of the car) and counterclockwise to screw back in.
- Watch on high quality for better image.

Angels and cornering bulb..

Fog Light

Tutorial Tools

Show Printable Version

Email this Page

By Russian325is on 01-09-2009, 11:46 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

next one will be the front bumper removal.

By wk0312 on 01-10-2009, 01:15 PM

Excellent post man...great job on the videos.

By ToadHollow on 01-10-2009, 01:42 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		2
DIY Clarity [ 1 = Not clear ]		5
Average 53%

Great videos ........

The first one ..... "a little pain in the ass ........... "

I laughed out loud only cause I know what a pain in the ass it is to get the H8 in/out of the housing ....

Great job

By Russian325is on 01-10-2009, 10:01 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Quote:

Originally Posted by ToadHollow

Great videos ........

The first one ..... "a little pain in the ass ........... "

I laughed out loud only cause I know what a pain in the ass it is to get the H8 in/out of the housing ....

Great job

Hahahahaha...yes indeed. Specially one handed.

By BuLoOoSki on 01-10-2009, 10:23 PM

thanks for an awesome DIY man!!

By Russian325is on 01-12-2009, 05:45 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

hahahah...
3:36 "son of a...."

By balance on 01-15-2009, 04:34 PM

Member reviews
Difficulty [ 1 = Difficult ]		4
Cost [ 1 = Expensive ]		5
DIY Clarity [ 1 = Not clear ]		5
Average 93%

thanks so much for these vids bro
its gonna make my install much much easier

By Enza on 01-18-2009, 02:50 AM

Wow. I appreciate the vid! Steady hands! Very easy to follow!

By Russian325is on 03-21-2009, 04:29 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

bump
(for those who have missed it)

#10

By EDM92 on 03-24-2009, 09:33 PM

Member reviews
Difficulty [ 1 = Difficult ]		5
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		5
Average 73%

Thanks so much, this is so clear and easy! I'm about to go do this right now for my new lights that I just got. It's dark, but I'm confident

#11

By EDM92 on 03-24-2009, 10:17 PM

Member reviews
Difficulty [ 1 = Difficult ]		5
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		5
Average 73%

Quote:

Originally Posted by BMWorNOTHING

Thanks so much, this is so clear and easy! I'm about to go do this right now for my new lights that I just got. It's dark, but I'm confident

Ok well I did the cornering eyes easy, but I can't see enough so I'm going to stop and do the Angels in the day time.

#12

By jstar41 on 04-05-2009, 10:49 PM

i was looking at the passenger side fog light.. and it seems to be a bit different since it has the intercooler vent there.. any video for that side..

#13

By E92-Lighting on 04-16-2009, 11:47 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

nice information to know

#14

By Russian325is on 06-12-2009, 04:43 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

bump

#15

By virtualbong on 06-12-2009, 07:05 AM

This is a fantastic post...really helps reassure oneself that it's not difficult at all. I may look into upgrading all my lights. Thanks man!

#16

By gotxbst on 06-22-2009, 01:15 AM

thx for the video...just finished install

#17

By j-tuned on 12-27-2009, 08:21 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

quick question, i just did the angel eyes (OMFG it took forever) but it feels a tad loose. i got the oem bubs to recheck the fitment and the oem bulb goes on pretty tight. could it be the new bulbs or i just installed it wrong?

#18

By ToadHollow on 12-27-2009, 08:28 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		2
DIY Clarity [ 1 = Not clear ]		5
Average 53%

Quote:

Originally Posted by j-tuned

If the bulb is flush with the housing then it's installed correctly. If you can't push the bulb out of place then it's locked in.

#19

By coh4777 on 02-23-2010, 01:56 AM

Do you need to disconnect the battery before doing any of these installs?

#20

By Lotus99 on 02-23-2010, 03:30 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

I've never heard of anyone doing that for a simple bulb change. Maybe for the HID ones as they're special, but these 3 aren't.

#21

By zesus-3 on 03-17-2010, 12:15 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

What bulbs did you use for the replacement, and can you post pics????

Tutorial Tools	Search this Tutorial
Show Printable Version Email this Page	Search this Tutorial: Advanced Search