[510xcharles]

hey guys i have a 328i and im just wondering does anyone have a quad tip setup for the 328i? please help me out

[PaulBailey@ltbmw]

In5ane_3 does.

[BudVlad]

When I purchased Remus quad I was warned that the muffler is for modes up to 2007 with N52 engine. I have 08 with N53 but I got it anyway. It fits perfectly and I am very happy wit it. US 328 and European 330 are identical except for the engine.

[in5ane_3]

I have the same setup as BudVlad except with an Mtech rear.



You can either go with any company that makes an axle back exhaust system for your car with quads ie Eisenmann, Remus ect. or go with your own custom setup. If you go to your local exhaust shop they can easily weld pipes to make it happen.

The custom setup will be the cheaper route to take as well.

[BudVlad]

I’m waiting for paint shop to changing my rear bumper to this:

[///AV_330i]

Originally Posted by BudVlad

When I purchased Remus quad I was warned that the muffler is for modes up to 2007 with N52 engine. I have 08 with N53 but I got it anyway. It fits perfectly and I am very happy wit it. US 328 and European 330 are identical except for the engine.

Do you think you could get the BMW perf on one side, and then just put the extra set of non working pipes on the other? I like the look of the quads, but the sound of the BMW perf exhaust

[BudVlad]

Originally Posted by ///AV_330i

Do you think you could get the BMW perf on one side, and then just put the extra set of non working pipes on the other? I like the look of the quads, but the sound of the BMW perf exhaust

I think you can but the fake pips on the other side with no problem.

[Andro07]

Guys with the Remus exhaust might want to take it to a muffler shop to get the tips straight, my exhaust looked like yours before I had a muffler shop adjust it.

[in5ane_3]

Originally Posted by Andro07

Guys with the Remus exhaust might want to take it to a muffler shop to get the tips straight, my exhaust looked like yours before I had a muffler shop adjust it.

How exactly did they do it? Did they just take the clamp off and make them straight then tighten everything back up?

[Andro07]

Originally Posted by in5ane_3

How exactly did they do it? Did they just take the clamp off and make them straight then tighten everything back up?

I'm not really sure, I think they rebent some off the brackets. I had the adjustment done while I was still living in Europe

[in5ane_3]

Originally Posted by Andro07

I'm not really sure, I think they rebent some off the brackets. I had the adjustment done while I was still living in Europe

Oh I see, because I can do most of the work at home so I just want to know how they did it if you knew. I'm sure I can adjust the left side because it's on with a clamp but I'm not sure about the right side since it's welded on.

[XYR03]

can we start posting the run down of the price for quad setups??

[in5ane_3]

Originally Posted by XYR03

can we start posting the run down of the price for quad setups??

It's different for every muffler shop but if you want an actual system, quads usually run +$1200.

[rkick08]

Originally Posted by ///AV_330i

Do you think you could get the BMW perf on one side, and then just put the extra set of non working pipes on the other? I like the look of the quads, but the sound of the BMW perf exhaust

dont put fake pipes on a bmw man, thats just ghetto.

[AMT92]

Originally Posted by rkick08

dont put fake pipes on a bmw man, thats just ghetto.

i've seen a old body clk 55 with a dummy quad

not to mention the plenty of old body cl500's and so with fake tips

[bmwwwmpowerrrr]

hey Insane!! I got my remus quad exhaust for my 328i
which rear diffuser did u get? did you change your bumper as well?
I was thinking about getting mtech rear diffuser but noticed that I had to replace my rear bumper as well.... so im kinda curious wut u did for ur diffuser.
I dont wanna spend too much money on it cuz im going broke.....T.T

[FrankiE90]

Originally Posted by kht0704

hey Insane!! I got my remus quad exhaust for my 328i
which rear diffuser did u get? did you change your bumper as well?
I was thinking about getting mtech rear diffuser but noticed that I had to replace my rear bumper as well.... so im kinda curious wut u did for ur diffuser.
I dont wanna spend too much money on it cuz im going broke.....T.T

he hasn't post much recently - In5ane.

he has the mtech rear bumper+diffuser for non turbo.
he cut the other side out for the quad setup.

if you have the oem rear bumper / u can cut as well.
just remember once u cut - it's cut.

[justin_boy]

Originally Posted by in5ane_3

I have the same setup as BudVlad except with an Mtech rear.



You can either go with any company that makes an axle back exhaust system for your car with quads ie Eisenmann, Remus ect. or go with your own custom setup. If you go to your local exhaust shop they can easily weld pipes to make it happen.

The custom setup will be the cheaper route to take as well.

did you just cut out the exit for the diffusor or is it a brand new diffuser, and also what kind of tips are those

[SDemetris]

hamann also offers a quad setup.. you can almost be sure that it will be outrageously expensive tho

[BudVlad]

I didn’t like the original Remus quad so I got Duke Dynamics diffuser and ACS tips.

[Amini77]

A ton of people do on the forum..just search the forums. Keep in my you're never limited to the far-separated quads like Andro07 or insane_3 for example, you can also do it 335 style distance or even m3..just no ///M badge lol I'm doing a quad setup soon and making it so it's 335 style distance. Exhaust is essentially just welded pipes lol nothing can't be done with a reputable exhaust shop. Good luck

[BRGmatthew]

Originally Posted by justin_boy

did you just cut out the exit for the diffusor or is it a brand new diffuser, and also what kind of tips are those

new members love to revive 2 year old threads lol