Vishnu Updates

Vicko · 06-10-2009, 09:07 PM

Quote:

Originally Posted by scottp999

It's gotta be something good since I told myself I wouldn't spend any more $ on mods this year. I'm sure you are going to do your best to open up my wallet (hoping meth kit).

335Turbo · 06-10-2009, 10:15 PM

Quote:

Originally Posted by shiv@vishnu

I should be able to finish them this weekend and post them up on Monday or Tues.

Shiv

Have the new DD maps been posted for rev.1?

RxBMW · 06-11-2009, 10:47 AM

Does anyone knows what codes 10770 and 10771 means?

Thanks.

lyjw88 · 06-12-2009, 09:37 AM

can I lower the Stage 1 UT setting to 70%?

jpsimon · 06-12-2009, 10:03 AM

sure, why?

Andras · 06-12-2009, 10:03 AM

When Shiv said that the latest firmware updated, the 117, was "BT friendly" what did he mean?
I recently experienced some problems with my BT, right after uploading 05/29 Stage3 map through firmware update #115.
What happened is that the condition base service is a mess.
My rear brakes' pads were to be replaced according to the last regular scan I had.
On the following I had it looked like also the front ones are to be replaced, but they're new!!!!!!!! And that was confirmed by BMW assistance, where I am now.
One more thing: when clearing codes on the I-drive appears a warning for some kind of ABS malfunctioning, it goes away right after codes are cleared.
Once again: if a BT scan is made with the car running V3 firmware update #115 is it possible that things get jammed?

... · 06-12-2009, 10:06 AM

^^^^
Convert to hex and search Bavauto DME Code pdf:

2A12 DMTL diagnosis module tank leakage,
magnetic valve, input signal
2A13 DMTL diagnosis module tank leakage,
leakage diagnosis pump, input signal

scheherazade · 06-12-2009, 11:51 AM

I'd still prefer steering wheel audio buttons for map changing.

1) You can display results on dash (right above where you're pressing)
2) I don't have homelink (LOL)

-scheherazade

RxBMW · 06-12-2009, 11:58 AM

Quote:

Originally Posted by enfox

^^^^
Convert to hex and search Bavauto DME Code pdf:

2A12 DMTL diagnosis module tank leakage,
magnetic valve, input signal
2A13 DMTL diagnosis module tank leakage,
leakage diagnosis pump, input signal

Thanks man, the car have the service engine soon light on and do not let me run the code erasing process

.

lyjw88 · 06-12-2009, 04:21 PM

Quote:

Originally Posted by jpsimon

sure, why?

I want my boost level to be around 12psi

TheAcAvenger · 06-12-2009, 05:12 PM

Quote:

Originally Posted by lyjw88

I want my boost level to be around 12psi

My low boost map peaks at 11.5 or so on the gauge. It's closer to 45%. Even when I was stage 1.

kptaylor · 06-12-2009, 05:13 PM

In the V3.3 5-29 file for 6MT, why are there two PCD files for each stage? They both say Map1=Map2...

Andras · 06-13-2009, 12:34 AM

Quote:

Originally Posted by Andras

When Shiv said that the latest firmware updated, the 117, was "BT friendly" what did he mean?
I recently experienced some problems with my BT, right after uploading 05/29 Stage3 map through firmware update #115.
What happened is that the condition base service is a mess.
My rear brakes' pads were to be replaced according to the last regular scan I had.
On the following I had it looked like also the front ones are to be replaced, but they're new!!!!!!!! And that was confirmed by BMW assistance, where I am now.
One more thing: when clearing codes on the I-drive appears a warning for some kind of ABS malfunctioning, it goes away right after codes are cleared.
Once again: if a BT scan is made with the car running V3 firmware update #115 is it possible that things get jammed?

up!
BTW
I updated the firmware to #117 version.
Would it be ok now to use the BT?

gt3fever · 06-13-2009, 12:42 AM

Quote:

Originally Posted by Andras

up!
BTW
I updated the firmware to #117 version.
Would it be ok now to use the BT?

firmwire 117 is compatible for use of BT

Andras · 06-13-2009, 01:00 AM

Quote:

Originally Posted by hipertech

firmwire 117 is compatible for use of BT

Ok, thanks for confirming.
My other point/question was to check out if the whole jam thing regarding Condition Base Service was due to the non-compatibility of firmware 115 with the BT or not........

Tuned335i · 06-14-2009, 02:56 AM

Preface: 2007 335i Coupe, pre-29.2, PROcede Rev I, DCI, Forge DVs, race gas mix - approx 95 octane.

Kinda late to the game here - too busy at work right now to keep up with E90Post.com, but I uploaded the pro01v03beta117.bin firmware and 5-29 Stage1_6AT map this afternoon and I want to report back that the reports from Rev I users are accurate. The boost is a bit quicker to pick up and it's definitely flat with none of the fluctuation that I had in the past. It's a nice improvement from the 2-19 map I have been driving.

I continue to have no codes whatsoever, shadow or otherwise, as reported with the BavarianTec Tool, Enthusiast Version. Coming up on two years with the PROcede installed (starting with V1.47) with no problems - love the tune.

lyjw88 · 06-14-2009, 03:24 AM

I installed my first procede today and OMG!!!!!!!!!!!
The car is now a beast.

Tuned335i · 06-14-2009, 03:28 AM

Quote:

Originally Posted by lyjw88

I installed my first procede today and OMG!!!!!!!!!!!
The car is now a beast.

Yup, that's a typical first response! Be judicious with your newfound supremacy!

Vudoo4u2 · 06-14-2009, 03:37 AM

remember to soon turn your DTC off....or your rear brakes are going to get a run in with some serious usage

lawdude · 06-14-2009, 07:35 AM

To all who now have a beast:

Has it lowered your ETs and/or increased your trap speeds?

Micks-e92 · 06-14-2009, 07:50 AM

Quote:

Originally Posted by Grendalf

Are we going to be able to activate the valet mode also? That will be so nice

Does the valet mode work with the latest firmware, maps and software?

Thanks!

edo · 06-14-2009, 09:57 AM

Shiv, could you please at least make a keyboard shortcut to start/stop datalogging? It is really inconveniet to use touchpad mouse to start/stop datalogging... Especially when there's no passenger.

06-11-2009, 10:47 AM	#267
RxBMW Private 1 Rep 84 Posts Drives: BMW 328 M Sport Join Date: Mar 2007 Location: PUERTO RICO iTrader: (1)	Does anyone knows what codes 10770 and 10771 means? Thanks.
	Appreciate 0 Quote

06-12-2009, 09:37 AM	#268
lyjw88 Major 95 Rep 1,351 Posts Drives: E92 335, W212 E350 Join Date: Dec 2006 Location: Boston iTrader: (6)	can I lower the Stage 1 UT setting to 70%? __________________ AW E92 335i - OEM Aero Lip - Vorsteiner CF CSL Trunk - 19" ZCP CSL's - KW V2 - Hammann Side Skirts - M-Tech Rear - DD CF Quad Diffuser - GPthunder 8500K - Painted Reflecter - Matte Black Kidney - Bastuck Quads - Code3 Spearco FMIC - Forge DV
	Appreciate 0 Quote

06-12-2009, 10:03 AM	#269
jpsimon Team Zissou 270 Rep 9,155 Posts Drives: 340i xDrive Join Date: Dec 2006 Location: CT iTrader: (7)	sure, why? __________________ 2016 340i xDrive (6MT, M-Sport, etc) www.datazap.me - fast, free, interactive data log viewing
	Appreciate 0 Quote

06-12-2009, 10:03 AM	#270
Andras Bodhisattva 7 Rep 181 Posts Drives: 335i E92 MY07 Join Date: Sep 2008 Location: Ferrara - Italy iTrader: (1)	important one When Shiv said that the latest firmware updated, the 117, was "BT friendly" what did he mean? I recently experienced some problems with my BT, right after uploading 05/29 Stage3 map through firmware update #115. What happened is that the condition base service is a mess. My rear brakes' pads were to be replaced according to the last regular scan I had. On the following I had it looked like also the front ones are to be replaced, but they're new!!!!!!!! And that was confirmed by BMW assistance, where I am now. One more thing: when clearing codes on the I-drive appears a warning for some kind of ABS malfunctioning, it goes away right after codes are cleared. Once again: if a BT scan is made with the car running V3 firmware update #115 is it possible that things get jammed? __________________ *Salut, Gilles!* *335I E92 6AT - V3.2 - GRUPPE M - FMI - RR DOWNPIPES - AE EXHAUST HFC*
	Appreciate 0 Quote

06-12-2009, 10:06 AM	#271
... Private 0 Rep 59 Posts Drives: a car Join Date: Jan 2009 Location: Dreamland iTrader: (1)	^^^^ Convert to hex and search Bavauto DME Code pdf: 2A12 DMTL diagnosis module tank leakage, magnetic valve, input signal 2A13 DMTL diagnosis module tank leakage, leakage diagnosis pump, input signal
	Appreciate 0 Quote

06-12-2009, 11:51 AM	#272
scheherazade Major 23 Rep 1,467 Posts Drives: 09 GTR (& 93' accord!) Join Date: Sep 2008 Location: DC metro area iTrader: (8)	I'd still prefer steering wheel audio buttons for map changing. 1) You can display results on dash (right above where you're pressing) 2) I don't have homelink (LOL) -scheherazade
	Appreciate 0 Quote

06-12-2009, 05:13 PM	#276
kptaylor First Lieutenant 4 Rep 322 Posts Drives: '07 335i Coupe Join Date: Mar 2007 Location: PHX, AZ iTrader: (0)	In the V3.3 5-29 file for 6MT, why are there two PCD files for each stage? They both say Map1=Map2...
	Appreciate 0 Quote

06-14-2009, 02:56 AM	#280
Tuned335i Major 17 Rep 1,310 Posts Drives: E92 335i Join Date: Jun 2007 Location: World of Torque iTrader: (0)	Preface: 2007 335i Coupe, pre-29.2, PROcede Rev I, DCI, Forge DVs, race gas mix - approx 95 octane. Kinda late to the game here - too busy at work right now to keep up with E90Post.com, but I uploaded the pro01v03beta117.bin firmware and 5-29 Stage1_6AT map this afternoon and I want to report back that the reports from Rev I users are accurate. The boost is a bit quicker to pick up and it's definitely flat with none of the fluctuation that I had in the past. It's a nice improvement from the 2-19 map I have been driving. I continue to have no codes whatsoever, shadow or otherwise, as reported with the BavarianTec Tool, Enthusiast Version. Coming up on two years with the PROcede installed (starting with V1.47) with no problems - love the tune. __________________ Torque - The One You Love...
	Appreciate 0 Quote

06-14-2009, 03:24 AM	#281
lyjw88 Major 95 Rep 1,351 Posts Drives: E92 335, W212 E350 Join Date: Dec 2006 Location: Boston iTrader: (6)	I installed my first procede today and OMG!!!!!!!!!!! The car is now a beast. __________________ AW E92 335i - OEM Aero Lip - Vorsteiner CF CSL Trunk - 19" ZCP CSL's - KW V2 - Hammann Side Skirts - M-Tech Rear - DD CF Quad Diffuser - GPthunder 8500K - Painted Reflecter - Matte Black Kidney - Bastuck Quads - Code3 Spearco FMIC - Forge DV
	Appreciate 0 Quote

06-14-2009, 03:37 AM	#283
Vudoo4u2 Night Sh1ft 141 Rep 2,950 Posts Drives: F10 M5 Join Date: Oct 2007 Location: It's bobsled time iTrader: (3) Garage List 2011 BMW E90 M3 [5.00]	remember to soon turn your DTC off....or your rear brakes are going to get a run in with some serious usage __________________ "Your first 10,000 photographs are your worst.” ― Henri Cartier-Bresson
	Appreciate 0 Quote

06-14-2009, 07:35 AM	#284
lawdude Colonel 44 Rep 2,259 Posts Drives: 335i ZPP ZSP TiAg MT Join Date: Jul 2006 Location: Georgia iTrader: (1)	To all who now have a beast: Has it lowered your ETs and/or increased your trap speeds? __________________ What do I know? I'm insane.
	Appreciate 0 Quote

06-14-2009, 09:57 AM	#286
edo ****** 34 Rep 880 Posts Drives: E92 335i Join Date: Nov 2008 Location: hell iTrader: (1)	Shiv, could you please at least make a keyboard shortcut to start/stop datalogging? It is really inconveniet to use touchpad mouse to start/stop datalogging... Especially when there's no passenger. __________________ Mods: RB turbos, PROcede Rev2.5 V5, BMS DCI, Scoops, Forge DVs, ar design catless DPs, Milltek exhaust system, Helix FMIC, Quaife LSD, VK MotorWerks OC Kit, Bilstein B16 PSS10 The ultimate mods' installation thread
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search