E90Post
 


200MPH
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Mechanical Maintenance: Break-in / Oil & Fluids / Servicing / Warranty > How to sand a Hartge replica spoiler?



Reply
 
Thread Tools Search this Thread
      08-24-2006, 06:29 PM   #1
FrankoQ
Deny everything
 
FrankoQ's Avatar
 
Drives: 2006 330i
Join Date: Apr 2006
Location: Laurel, MD

Posts: 11,291
iTrader: (4)

Garage List
2006 330i  [0.00]
Send a message via AIM to FrankoQ
How to sand a Hartge replica spoiler?

I'm trying to fit a hartge replica spoiler and I can see I need to
trim/sand here and there.
what do I use to sand?
the spoiler is already painted. would sanding hurt(crack) the paint?

Please help.
__________________

I need a drink

FrankoQ is offline   United_States
0
Reply With Quote
      08-24-2006, 08:12 PM   #2
lux.sh
missing two turbos.
 
lux.sh's Avatar
 
Drives: fast around corners.
Join Date: Sep 2005
Location: Curves

Posts: 4,860
iTrader: (12)

Garage List
I also had to trim the hartge lip(original) down in order to get it fit.

I had to buy a Dremel kit from home depot(returned it after I used it). Mine lip was also painted at the time of sanding/trimming. No problem with paint cracking.

As long as you don't bend/crack the lip, paint should stay fine. I would be careful and keep the soft touch though, if you want to maintain the paint job.

It was big pain in the ass to trim it down. If you are used to using Dremel or any handy tools in your garage, you should be fine. I consider myself pretty good with using my hand, and it still was a tough job to trim it nicely to make it fit. Also, make sure to cover/tape your original bumper(do not use thick tapes, because the lip won't fit if you do), because in the process of trimming/sanding, you will have to trim Area A(say if you have multipla areas to trim), make sure it fits right, then trim Area B, make sure it fits right, trim Area C, etc etc.

Very time consuming process but nothing too hard. Good weekend project however.

good luck.
__________________
06 AW E90 330i ZPP/ZSP/Step/Expired Warranty

: Prior Design Front : ACS Rear : ACS Roof : BlackLines : Simota Intake : Carbon Fiber Interior Trim :
: MTEC V3 : 24% Charcoal : V1 Hardwired : Solaris Invisibulbs/LED interior :
lux.sh is offline   United_States
0
Reply With Quote
      08-26-2006, 04:38 PM   #3
FrankoQ
Deny everything
 
FrankoQ's Avatar
 
Drives: 2006 330i
Join Date: Apr 2006
Location: Laurel, MD

Posts: 11,291
iTrader: (4)

Garage List
2006 330i  [0.00]
Send a message via AIM to FrankoQ
Thanks for the response. That helps a lot.
I have a dremel tool.

Do you use the sanding or cutting tool?
see pics below. which one did you use?

cutting
Name:  080596004262_3.jpg
Views: 139
Size:  28.7 KB

sanding
Name:  080596009328_3.jpg
Views: 138
Size:  6.7 KB

sanding
Name:  080596009526_3.jpg
Views: 136
Size:  7.1 KB
__________________

I need a drink

FrankoQ is offline   United_States
0
Reply With Quote
      08-26-2006, 04:49 PM   #4
lux.sh
missing two turbos.
 
lux.sh's Avatar
 
Drives: fast around corners.
Join Date: Sep 2005
Location: Curves

Posts: 4,860
iTrader: (12)

Garage List
lol, funny you posted those 3 pics. Cause those 3 tools are EXACTLY what I used.

For the sections where you have to cut it because it'll take too much time to sand it down, I used that round cutter(1st pic) to cut(as you mentioned). For sanding, the 3rd one works great overall, especially if you have to trim those tight corners that fits around the foglight area. 2nd one does give you better precise sanding without making weird angles to the lip.

Go give it a try. Considering you already have a dremel tool, I assume you used it before. That case, you shouldn't have a problem with it. Just make sure you have several hours to spare for this trimming project.
__________________
06 AW E90 330i ZPP/ZSP/Step/Expired Warranty

: Prior Design Front : ACS Rear : ACS Roof : BlackLines : Simota Intake : Carbon Fiber Interior Trim :
: MTEC V3 : 24% Charcoal : V1 Hardwired : Solaris Invisibulbs/LED interior :
lux.sh is offline   United_States
0
Reply With Quote
      08-28-2006, 09:32 AM   #5
FrankoQ
Deny everything
 
FrankoQ's Avatar
 
Drives: 2006 330i
Join Date: Apr 2006
Location: Laurel, MD

Posts: 11,291
iTrader: (4)

Garage List
2006 330i  [0.00]
Send a message via AIM to FrankoQ
Quote:
Originally Posted by lux.sh
lol, funny you posted those 3 pics. Cause those 3 tools are EXACTLY what I used.

For the sections where you have to cut it because it'll take too much time to sand it down, I used that round cutter(1st pic) to cut(as you mentioned). For sanding, the 3rd one works great overall, especially if you have to trim those tight corners that fits around the foglight area. 2nd one does give you better precise sanding without making weird angles to the lip.

Go give it a try. Considering you already have a dremel tool, I assume you used it before. That case, you shouldn't have a problem with it. Just make sure you have several hours to spare for this trimming project.
Thanks for the tips.
I finished the job yesterday. it took a couple of hours to fit/cut/sand and then install the lip.
This was indeed the perfect tool for the job. The paint did not crack.
__________________

I need a drink

FrankoQ is offline   United_States
0
Reply With Quote
      08-29-2006, 08:45 AM   #6
txusa03
Major General
 
Drives: TS330iPPSP6MT
Join Date: Jul 2005
Location: Planet Earth

Posts: 6,567
iTrader: (2)

Quote:
Originally Posted by lux.sh
I had to buy a Dremel kit from home depot(returned it after I used it)...
what reason did you give them when they asked you why you are returning it? Might come in handy later...
txusa03 is offline  
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:26 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST