FS: Fujita Short Ram Intake 325i/330i - BMW 3-Series (E90 E92) Forum

aznbo187 · 08-26-2006, 07:25 PM

Selling a barely used Fujita short ram intake. It comes with all the nuts, clamps, bolts that were originally there. The heat shield is also included and the finish is a black crinkle finish.

Asking $200 shipped.

Chesmu · 08-26-2006, 07:54 PM

you're gonna try and sell the intake after your last thread?

aznbo187 · 08-27-2006, 05:54 PM

Correction. Not my intake, but hey, might as well give it a shot. Plus, maybe someone might know a cure?

Chesmu · 08-29-2006, 12:33 AM

Quote:

Originally Posted by aznbo187

Correction. Not my intake, but hey, might as well give it a shot. Plus, maybe someone might know a cure?

correction: i said the thread was yours...not the intake.
But my point is still valid.

06E90Rostik · 08-29-2006, 09:19 PM

Valid point for ALL intakes - they all suck...

Lucid4000 · 08-29-2006, 10:09 PM

I'll give ya $50 bucks, after seeing your last thread its a deal and a half.

canucklion · 08-29-2006, 10:13 PM

brave man!

Quote:

Originally Posted by Lucid4000

I'll give ya $50 bucks, after seeing your last thread its a deal and a half.

Chesmu · 08-29-2006, 10:20 PM

Quote:

Originally Posted by 06E90Rostik

Valid point for ALL intakes - they all suck...

Pun fully intended?

06E90Rostik · 08-30-2006, 12:46 AM

Quote:

Originally Posted by moocow

Pun fully intended?

Paraphrase please

Lucid4000 · 08-30-2006, 10:38 PM

Not going for the $50

Chesmu · 08-31-2006, 12:18 AM

Quote:

Originally Posted by Lucid4000

Not going for the $50

did we make him mad?

Lucid4000 · 08-31-2006, 10:24 PM

I guess so... and I thought it was a reasonable offer... don't you??

aznbo187 · 09-08-2006, 08:49 PM

Quote:

Originally Posted by Lucid4000

Not going for the $50

I can justify loosing that much money for a new intake. A $100 would probably take it, but why would you buy it if you knew it had problems? Are you hiding any secret solutions??

aznbo187 · 09-08-2006, 08:49 PM

Quote:

Originally Posted by Chesmu

did we make him mad?

I'm still around. Acura owner here, so I don't check these forums often.

oneshare325 · 09-08-2006, 08:54 PM

Can someone post his previous thread...i want to know what all the hub ub is about!

sunchild · 09-08-2006, 09:22 PM

Quote:

Originally Posted by Chesmu

correction: i said the thread was yours...not the intake.
But my point is still valid.

lol you are an ass.

Chesmu · 09-09-2006, 12:25 AM

Quote:

Originally Posted by sunchild

lol you are an ass.

If it weren't for my ass, there wouldn't be anything smart about me.

Chesmu · 09-09-2006, 12:27 AM

Quote:

Originally Posted by oneshare325

Can someone post his previous thread...i want to know what all the hub ub is about!

yeah... here it is.....and once again I say....

http://www.e90post.com/forums/showthread.php?t=27976

rtakashima · 02-08-2007, 07:52 PM

We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.

ScheerSpeed · 02-08-2007, 09:32 PM

lol. my butt dyno likes the fujita!

08-26-2006, 07:25 PM	#1
aznbo187 Private Drives: M3 Join Date: Aug 2006 Location: So.Cal Posts: 57 iTrader: (1)	FS: Fujita Short Ram Intake 325i/330i Selling a barely used Fujita short ram intake. It comes with all the nuts, clamps, bolts that were originally there. The heat shield is also included and the finish is a black crinkle finish. Asking $200 shipped.
	Tweet

08-26-2006, 07:54 PM	#2
Chesmu Brigadier General Drives: 2006 330i 6-mt Join Date: Dec 2005 Location: Phoenix,AZ Posts: 3,029 iTrader: (2) Garage List 2006 330i [0.00] 2006 330i [0.00]	you're gonna try and sell the intake after your last thread? __________________ "Teach the ignorant. Ignore the stupid."

08-29-2006, 10:09 PM	#6
Lucid4000 Major Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! Posts: 1,190 iTrader: (5) Garage List 2006 330i Sport [0.00]	I'll give ya $50 bucks, after seeing your last thread its a deal and a half. __________________ Mobile Addictions 718.877.7700 or info@mobile-addictions.com www.mobile-addictions.com

08-30-2006, 10:38 PM	#10
Lucid4000 Major Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! Posts: 1,190 iTrader: (5) Garage List 2006 330i Sport [0.00]	Not going for the $50 __________________ Mobile Addictions 718.877.7700 or info@mobile-addictions.com www.mobile-addictions.com

08-31-2006, 10:24 PM	#12
Lucid4000 Major Drives: 335i AW Sport 6MT Join Date: Jan 2006 Location: NYC!! Posts: 1,190 iTrader: (5) Garage List 2006 330i Sport [0.00]	I guess so... and I thought it was a reasonable offer... don't you?? __________________ Mobile Addictions 718.877.7700 or info@mobile-addictions.com www.mobile-addictions.com

08-27-2006, 05:54 PM	#3
aznbo187 Private Drives: M3 Join Date: Aug 2006 Location: So.Cal Posts: 57 iTrader: (1)	Correction. Not my intake, but hey, might as well give it a shot. Plus, maybe someone might know a cure?

08-29-2006, 09:19 PM	#5
06E90Rostik Major Drives: 2006 325i, 2011 335i Join Date: Feb 2006 Location: CA, Sacramento Posts: 1,405 iTrader: (10) Garage List 2011 335i [5.00] 2006 325i [0.00]	Valid point for ALL intakes - they all suck...

09-08-2006, 08:54 PM	#15
oneshare325 Brigadier General Drives: E90 325i Join Date: Feb 2006 Location: Virginia, NoVA Posts: 4,195 iTrader: (11) Garage List 2006 325i [0.00]	Can someone post his previous thread...i want to know what all the hub ub is about! __________________ Arctic/Gray/Alum/Step/ZPP/ZCW/Xenon Mods: Interior Xenon/Xenesis Fogs/330 Chrome Exhaust Tips/Rear fog light switch/Blacklines/Charcoal filter removal/K&N Drop in Filter/Smoked Vinyl Overlays/Blackout grill/Pearlescent Hand-Brake/Happy Robot Mod/CF Door Pillars/OEM style Trunk spoiler/CF Splitters/Smoked LED Turn Signal

02-08-2007, 07:52 PM	#19
rtakashima Member Drives: 06 SC IS350 Join Date: Jan 2007 Location: CA Posts: 8 iTrader: (0)	We would love to bring in the 330 and 325 manuals to do a before and after test. It would allow us to do more research and look for improvements. I have asked others here if they recall getting any calls about test pieces and nobody has heard anything. If anybody is interested in bringing their stock vehicle to Temecula, CA, we can do a before and after dyno run for you. As for the 2nd gear test in the automatic, we could not get the vehicle to hold gear. However, the stock intake and modified intake were both done in the same gear. Please email me at ryan@f5air.com if you are interested. The intake will be free for you as well as the dyno time.

02-08-2007, 09:32 PM	#20
ScheerSpeed Major General Drives: Jerez E90 M3 Join Date: Sep 2006 Location: Miami, FL Posts: 5,614 iTrader: (13)	lol. my butt dyno likes the fujita!