E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Suspension | Brakes | Chassis > a problem with brakes



Reply
 
Thread Tools Search this Thread
      09-10-2006, 07:31 PM   #1
ck1129
Second Lieutenant
 
Drives: 2006 325i
Join Date: Jul 2006
Location: NY

Posts: 276
iTrader: (0)

a problem with brakes

my brakes are starting to squeak alot more often now. they started at around 500 miles, and i payed no attention to it since i figured it was due to brake in. now it happens all the time, the brakes still seem to catch i guess,although in my mind i'm starting to worry because they just dont seem right. im planning on bringing it in this week to check it out, my guess is warped rotors. can there potentially be any hazards with driving with warped rotors for a little while? i do not want my brakes to just stop working on the highway lol. if they are, would they replace them no charge? and in the worse case scenario, and i have to use emergency brakes, how do i do it lol. do i just jerk it up quick, or slowly?
ck1129 is offline  
0
Reply With Quote
      09-10-2006, 08:37 PM   #2
ck1129
Second Lieutenant
 
Drives: 2006 325i
Join Date: Jul 2006
Location: NY

Posts: 276
iTrader: (0)

thanks for the help guys!
ck1129 is offline  
0
Reply With Quote
      09-10-2006, 08:46 PM   #3
espo
Captain
 
espo's Avatar
 
Drives: 2014 M235i
Join Date: Sep 2005
Location: Sugar Land TX

Posts: 701
iTrader: (0)

Quote:
Originally Posted by ck1129
thanks for the help guys!
Did you expect an answer in less than 1 hour??? Or did someone PM you the answer???

In case you still need an answer: Which brakes are doing this? If it's the front brakes, and they actually are "warped" they believe me you WILL feel it because the car vibrates like hell when you hit the brakes. It happened to me in my last BMW and yes they were replaced for free.

Also, if they are just squeeking, then you may want to wash out the wheels from all of the brake dust that builds up...
__________________
E90 330xi Mystic Blue/Black Leather/Aluminum 6sp Manual ZSP/ZPP/ZCW/CA - Retired
F22 M235i Mineral Gray/Red Leather/Aluminum 6sp Manual ZPP/ZTP
espo is offline   United_States
0
Reply With Quote
      09-10-2006, 09:04 PM   #4
ck1129
Second Lieutenant
 
Drives: 2006 325i
Join Date: Jul 2006
Location: NY

Posts: 276
iTrader: (0)

yea, they are squeaking like crazy. it embarasses me as i pull up to places, and my car squeaks like a 20 year old car lol. what do you mean by washing out the wheels of brakedust?
ck1129 is offline  
0
Reply With Quote
      09-10-2006, 09:53 PM   #5
ward
Major General
 
Drives: F
Join Date: May 2005
Location: T

Posts: 6,162
iTrader: (0)

if your brakes squeal enough to bother you take it to the dealer to have them fix it, it's not a safety issue and you can't "wash them" and make the sound stop
ward is offline  
0
Reply With Quote
      09-10-2006, 09:58 PM   #6
canucklion
pull my finger to get your kinder® surprise
 
canucklion's Avatar
 
Drives: circles around you
Join Date: Dec 2005
Location: Toronto, Canada

Posts: 10,454
iTrader: (9)

I'm pretty sure when he said 'washing out the wheels of brake dust' he meant 'washing out the wheels of brake dust'...

seriously, it helps, wash your wheels, see if it works
Quote:
Originally Posted by ck1129
what do you mean by washing out the wheels of brakedust?
__________________
canucklion is offline   Canada
0
Reply With Quote
      09-11-2006, 01:43 PM   #7
Ghunger
Major
 
Ghunger's Avatar
 
Drives: 330i
Join Date: Sep 2005
Location: Seattle, WA

Posts: 1,025
iTrader: (0)

I'm gonna bet that you didn't bed in your brake pads. This is the procedure I use but most are similar. Reading up on how and why might give you some confidence in doing it too.

http://www.zeckhausen.com/bedding_in_brakes.htm

I'm guessing it's not squeeling because the brakes are hot though. I know mine always make noise after I get them real hot (like at the track) and then go back to normal braking. I think it's due to the pad compound though and it goes away after a little bit.
__________________

330i Monaco Blue, Terra /w aluminum trim, SP, PP, CA, PDC, Nav, Folding Seats, Sat Prep
European Delivery Blog
Picture Gallery
Ghunger is offline   United_States
0
Reply With Quote
      09-11-2006, 01:52 PM   #8
Kenny C
Second Lieutenant
 
Drives: 2007 335 e90 1998 e39 540
Join Date: Aug 2006
Location: Oceanside, New York

Posts: 275
iTrader: (0)

Garage List
Ghunger Learn something new everday. Thanks that was interesting.
Kenny C is offline  
0
Reply With Quote
      09-11-2006, 01:55 PM   #9
Mr. BMW
Captain
 
Mr. BMW's Avatar
 
Drives: 2006 330i
Join Date: Feb 2006
Location: MA

Posts: 916
iTrader: (0)

Garage List
2006 330i  [0.00]
2003 Pathfinder  [0.00]
Quote:
Originally Posted by Ghunger
I'm gonna bet that you didn't bed in your brake pads. This is the procedure I use but most are similar. Reading up on how and why might give you some confidence in doing it too.

http://www.zeckhausen.com/bedding_in_brakes.htm

I'm guessing it's not squeeling because the brakes are hot though. I know mine always make noise after I get them real hot (like at the track) and then go back to normal braking. I think it's due to the pad compound though and it goes away after a little bit.
This is exactly the opposite of what the BMW manual tells you to do.
Step 2 says: “Make a series of eight near-stops from 60 to about 10 mph. Do it HARD by pressing on the brakes firmly, just shy of locking the wheels or engaging ABS. “

The BMW manual tells you not to hit the brakes hard for the first few hundred miles???

I would follow the BMW manual before following the "How to Kill my brakes" manual by Dave Zeckhausen.
__________________
06 330i Monaco Blue/Black
11 Land Rover LR2(Winter Beater)
02 X5 3.0 Topaz Blue/Black (retired)
01 330ci Orient Blue/Black (retired)
96 328is Montreal Blue/Gray (retired)
Mr. BMW is offline  
0
Reply With Quote
      09-11-2006, 02:28 PM   #10
inTgr8r
Major General
 
inTgr8r's Avatar
 
Drives: 07 M Coupe
Join Date: Mar 2006
Location: Toronto

Posts: 7,959
iTrader: (7)

Quote:
Originally Posted by ck1129
my brakes are starting to squeak alot more often now. they started at around 500 miles, and i payed no attention to it since i figured it was due to brake in. now it happens all the time, the brakes still seem to catch i guess,although in my mind i'm starting to worry because they just dont seem right. im planning on bringing it in this week to check it out, my guess is warped rotors. can there potentially be any hazards with driving with warped rotors for a little while? i do not want my brakes to just stop working on the highway lol. if they are, would they replace them no charge? and in the worse case scenario, and i have to use emergency brakes, how do i do it lol. do i just jerk it up quick, or slowly?
squeeking is not warped rotors.
With warped rotors you feel pulsing in the pedal.

The dealer will likely just give it a squirt of anti squeal.
inTgr8r is offline   Canada
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:14 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST