Official WI Chat and Meet Thread - Page 5 - BMW 3-Series (E90 E92) Forum

UdubBadger · 09-16-2009, 06:55 PM

Quote:

Originally Posted by Darkcyd_Turbo

if anyone has a cooler they could bring that would be awesome! or if anyone wants to grab chips or anything like that, that'll be cool too!

I'll bring some chips

rmlink · 09-16-2009, 07:04 PM

I have you covered on the Procede test drive. It's only REV I, but still hauls ass and is very tunable. Consider the cooler brought. Should be fun meeting all of you guys!

Darkcyd_Turbo · 09-16-2009, 07:04 PM

Quote:

Originally Posted by UdubBadger

I'll bring some chips

I just need a cooler because I lent mine out which means I wont see it for awhile....so if anyone can help out and bring one let me know so I dont have to call around to borrow one.

UdubBadger · 09-16-2009, 07:48 PM

Quote:

Originally Posted by rmlink

I have you covered on the Procede test drive. It's only REV I, but still hauls ass and is very tunable. Consider the cooler brought. Should be fun meeting all of you guys!

nice.

and now we have a cooler too.

Darkcyd_Turbo · 09-16-2009, 08:12 PM

Awesome sounds like we are all set...I'll go grocery shopping for the grill goodies this weekend! Any "special" requests for condiments or whatever?

Darkcyd_Turbo · 09-16-2009, 08:16 PM

Quote:

Originally Posted by rmlink

I have you covered on the Procede test drive. It's only REV I, but still hauls ass and is very tunable. Consider the cooler brought. Should be fun meeting all of you guys!

::Borat Voice:: "vary nice!"

Sounds like we are all set. Yay another Montego in Madison! Can't wait to kick it with everyone again and to meet a few new faces...

Vu...hopefully updating to 1.4 will help. I wanna comparison ride in your car and rm's.

nood1es · 09-17-2009, 01:07 AM

anyone know any1 that needs 2 dark green leather sofas? Need to get rid of them, perfect condition 400 for both or 250 each.

nood1es · 09-17-2009, 01:07 AM

And ya I wanna do a comparison too between the jb and procede. I found a place that sells 100.

UdubBadger · 09-17-2009, 01:42 AM

vu you got a pic of the sofas?

nood1es · 09-17-2009, 10:03 AM

UdubBadger · 09-17-2009, 11:11 AM

hmm not bad... i just don't have the $ to spend on them now nor do I have a way to pick them up or take my couches back to chicago.

you try craigslist yet?

Darkcyd_Turbo · 09-17-2009, 12:27 PM

I checked the weather for monday...says rain maybe. Hope the weather holds up!

UdubBadger · 09-17-2009, 01:27 PM

Quote:

Originally Posted by Darkcyd_Turbo

I checked the weather for monday...says rain maybe. Hope the weather holds up!

we can always switch it... I got yelled at by my GF cuz I'm gonna be missing a 2 hr season premier of House which is like the only show I watch on TV other than ESPN.

Darkcyd_Turbo · 09-17-2009, 01:44 PM

Quote:

Originally Posted by UdubBadger

we can always switch it... I got yelled at by my GF cuz I'm gonna be missing a 2 hr season premier of House which is like the only show I watch on TV other than ESPN.

TiVo or DVR bro!!! lol we'll see how it goes on Saturday and see if anything changes...

UdubBadger · 09-17-2009, 02:33 PM

Quote:

Originally Posted by Darkcyd_Turbo

TiVo or DVR bro!!! lol we'll see how it goes on Saturday and see if anything changes...

ehhhhh I opted for the HD box instead of the DVR one from Charter

Eha1988 · 09-17-2009, 04:59 PM

I hope I get my brakes on before we meet, the noise is just embarrassing. Got Powerslot rotors and Hawks HPS pads coming for both front and rear

UdubBadger · 09-17-2009, 08:48 PM

nice

nood1es · 09-18-2009, 03:44 PM

woot!! got 1.4 8.3 burned. Anyone good with soldering? I gotta solder in a lil cap for my jb3 board. Or ill just bring my soldering gun and materials and get it done there.

Its tiny but.........i just wanna make sure hehe.

I have the gen1 board, I just got the cap and just need to insert it to look like gen 2 board. Without it, I get stumbles on occasion per terry's instructions.

http://www.n54tech.com/forums/showthread.php?t=4952

UdubBadger · 09-18-2009, 03:54 PM

Whatever you just said sounded like Portuguese to my brain

nood1es · 09-18-2009, 03:57 PM

translation*

1.4 burned.

Any1 good with soldering lil chip?

rmlink · 09-18-2009, 04:14 PM

That looks easy enough to do. I've soldered worse.

UdubBadger · 09-18-2009, 04:17 PM

Quote:

Originally Posted by nood1es

translation*

1.4 burned.

Any1 good with soldering lil chip?

hahaha no I know what you said, I'm just saying it doesn't make sense to me cuz I know nothing about 1. Electronics and 2. N54 turbo upgrades (other than the LET tune).

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-16-2009, 07:04 PM	#90
rmlink Private Drives: Montego e92 335i Join Date: Jun 2006 Location: Madison, WI Posts: 54 iTrader: (0)	I have you covered on the Procede test drive. It's only REV I, but still hauls ass and is very tunable. Consider the cooler brought. Should be fun meeting all of you guys!

09-16-2009, 08:12 PM	#93
Darkcyd_Turbo "Booty Hole Bandit" Drives: 2008 Montego E92 335xi Join Date: Apr 2009 Location: Madison, WI Posts: 1,537 iTrader: (14)	Awesome sounds like we are all set...I'll go grocery shopping for the grill goodies this weekend! Any "special" requests for condiments or whatever?

09-17-2009, 01:07 AM	#95
nood1es Captain Drives: E70 Join Date: May 2007 Location: Madison, WI Posts: 669 iTrader: (10)	anyone know any1 that needs 2 dark green leather sofas? Need to get rid of them, perfect condition 400 for both or 250 each.

09-17-2009, 01:42 AM	#97
UdubBadger Banned Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs Posts: 24,714 iTrader: (22) Garage List 2004 BMW 330i ZHP [4.75] 2011 135i [3.73] 2008 328xi [4.38]	vu you got a pic of the sofas?

09-17-2009, 10:03 AM	#98
nood1es Captain Drives: E70 Join Date: May 2007 Location: Madison, WI Posts: 669 iTrader: (10)

09-17-2009, 11:11 AM	#99
UdubBadger Banned Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs Posts: 24,714 iTrader: (22) Garage List 2004 BMW 330i ZHP [4.75] 2011 135i [3.73] 2008 328xi [4.38]	hmm not bad... i just don't have the $ to spend on them now nor do I have a way to pick them up or take my couches back to chicago. you try craigslist yet?

09-17-2009, 12:27 PM	#100
Darkcyd_Turbo "Booty Hole Bandit" Drives: 2008 Montego E92 335xi Join Date: Apr 2009 Location: Madison, WI Posts: 1,537 iTrader: (14)	I checked the weather for monday...says rain maybe. Hope the weather holds up!

09-17-2009, 04:59 PM	#104
Eha1988 New Member Drives: 04 G35x Join Date: Sep 2009 Location: Madison Posts: 21 iTrader: (0)	I hope I get my brakes on before we meet, the noise is just embarrassing. Got Powerslot rotors and Hawks HPS pads coming for both front and rear

09-17-2009, 08:48 PM	#105
UdubBadger Banned Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs Posts: 24,714 iTrader: (22) Garage List 2004 BMW 330i ZHP [4.75] 2011 135i [3.73] 2008 328xi [4.38]	nice

09-18-2009, 03:44 PM	#106
nood1es Captain Drives: E70 Join Date: May 2007 Location: Madison, WI Posts: 669 iTrader: (10)	woot!! got 1.4 8.3 burned. Anyone good with soldering? I gotta solder in a lil cap for my jb3 board. Or ill just bring my soldering gun and materials and get it done there. Its tiny but.........i just wanna make sure hehe. I have the gen1 board, I just got the cap and just need to insert it to look like gen 2 board. Without it, I get stumbles on occasion per terry's instructions. http://www.n54tech.com/forums/showthread.php?t=4952

09-18-2009, 03:54 PM	#107
UdubBadger Banned Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs Posts: 24,714 iTrader: (22) Garage List 2004 BMW 330i ZHP [4.75] 2011 135i [3.73] 2008 328xi [4.38]	Whatever you just said sounded like Portuguese to my brain

09-18-2009, 03:57 PM	#108
nood1es Captain Drives: E70 Join Date: May 2007 Location: Madison, WI Posts: 669 iTrader: (10)	translation* 1.4 burned. Any1 good with soldering lil chip?

09-18-2009, 04:14 PM	#109
rmlink Private Drives: Montego e92 335i Join Date: Jun 2006 Location: Madison, WI Posts: 54 iTrader: (0)	That looks easy enough to do. I've soldered worse.