Alarm retrofit kit for MY 2009 3/09+ and 2010 - yes it exists! - Page 2 - BMW 3-Series (E90 E92) Forum

amlebede · 01-18-2010, 12:20 AM

Waste of money. Just go aftermarket.

13749032 · 01-18-2010, 06:57 AM

Quote:

Originally Posted by CRS

That's what I'm thinking!

Went to the dealer this morning to fix the issue with the trunk not opening with the FOB..and wow I should have found this issue on my own... while installing the alarm, they turned the valet trunk switch in the glove box to LOCK. I have never messed with the switch.. Boy did i feel like an idiot....

CRS · 01-18-2010, 05:49 PM

Quote:

Originally Posted by 13749032

Went to the dealer this morning to fix the issue with the trunk not opening with the FOB..and wow I should have found this issue on my own... while installing the alarm, they turned the valet trunk switch in the glove box to LOCK. I have never messed with the switch.. Boy did i feel like an idiot....

hahahaha

Well done!

Did you manage to get the part numbers?

claykin · 01-18-2010, 06:42 PM

Quote:

Originally Posted by zamba0321

I went with the 'fake' alarm emulation that comes with the remotekey+ module.
It chirps and blinks the LED plus adds some comfort features and was an easy
install on my 05/09 build date 328i

http://www.e90post.com/forums/showthread.php?t=329423

The Remotekey install is not much simpler than the OEM alarm retrofit. You still have to remove the glovebox, wire up the cowl and headliner to the mirror for the clown nose to blink, and fish the piezo into the engine bay. The way I look at it, if I'm gonna bother I'll just go for the alarm retrofit.

13749032 · 01-18-2010, 11:38 PM

Quote:

Originally Posted by CRS

hahahaha

Well done!

Did you manage to get the part numbers?

Still working on emailing the SA there..They are very curious as to why i need the info, but are willing to help. Typical germans, i'll get thru it.. Lived over here for 7yrs haven't failed yet...;-)

CRS · 01-19-2010, 02:41 AM

Quote:

Originally Posted by 13749032

Still working on emailing the SA there..They are very curious as to why i need the info, but are willing to help. Typical germans, i'll get thru it.. Lived over here for 7yrs haven't failed yet...;-)

Yeah, don't know why NA doesn't sell these or are very reluctant to sell them.

Stupid.

CRS · 01-31-2010, 12:07 PM

Been a while...

Anything yet?

zellex · 02-23-2010, 03:05 AM

Anything now? I'm looking for this since...http://www.e90post.com/forums/showthread.php?t=354077

claykin · 02-25-2010, 08:30 AM

I was given part #61 12 2 163 192 for the accessory cable req'd for non pre-wire cars that do not have CA.

VP Electricity · 04-21-2010, 07:18 PM

Anyone else get this going?

srcstc · 05-09-2010, 08:21 AM

I'm doing this retrofit now. Already got the headliner portion out of the way. A couple observations...

- if you have this type of cover, with the slits for the motion sensor, then you don't need a new headiner like the BMW instructions dictate:

Even if your cover doesn't have the slits you can simply order a cover with slits.

- The headliner does not need to be removed! This cuts down on the time a lot. You just need to drop it down a few inches to run your wires. I only removed the passenger visor (2 screws), the catch for the visor (1 screw), the passenger grab handle(2 screws), the rubber/headliner moonroof trim (just pull) and the passenger A-Pillar cover (1 screw hidden behind the plastic SRS cap.) And obviously the moonroof switch panel and the panel behind the moonroof. I was then able to lower the headliner enough to run the wire. You can see that there is already a wire glued to the headliner going back there for the light. Just follow the same path for the motion sensor wiring.

- I have premium package and my car came with the correct mirror for alarm. I just had to add the 2 wires to the mirror connector as per the official instructions. That was easy.

- Right now I'm at the stage of the install where I have to add a wire to the back of the junction box (JBE). This is the hardest part of the install because the 4 screws holding it in are hard to reach. Once I'm done with this, the rest should be a walk in the park.

srcstc · 05-09-2010, 08:25 AM

The easy way to remove the panel behind the moonroof:

Grab it at the front (top in this photo) with your finger nails and pull back then down. Pulling it back compresses the 2 metal clips (pictured on the bottom) and you can just pull the front down.

srcstc · 05-11-2010, 12:16 PM

Finally DONE! What a PITA too. Just have to get it activated. I've got Mirror LED and the alarm goes off if you open the door. No chirp or motion sensor yet (till it's activated.)

JohnnyCanuck · 05-11-2010, 03:10 PM

Awesome that you got it installed and working. Quick question ... is there an easy way to tell whether you have the right mirror?

srcstc · 05-11-2010, 03:35 PM

Does yours have the red clown-nose? And do you have an auto-dimming mirror?

JohnnyCanuck · 05-11-2010, 03:39 PM

Auto-dimming with compass ... but no clown nose. There is a little white square on the back of the mirror that looks like an LED, but it is definitely not a clown nose.

srcstc · 05-11-2010, 03:53 PM

Quote:

Originally Posted by JohnnyCanuck

Auto-dimming with compass ... but no clown nose. There is a little white square on the back of the mirror that looks like an LED, but it is definitely not a clown nose.

You probably don't have the right one if you don't have the clown nose. The white square is most likely the light sensor for the auto-dimming. You should be able to find one on Ebay.

Rich

JohnnyCanuck · 05-11-2010, 04:03 PM

Thanks ...

CRS · 05-13-2010, 05:36 PM

Quote:

Originally Posted by JohnnyCanuck

Awesome that you got it installed and working. Quick question ... is there an easy way to tell whether you have the right mirror?

Are you getting the retrofit to a non-prewired car?

If so, where did you get it done? Or are you doing it yourself?

srcstc · 05-13-2010, 06:57 PM

Quote:

Originally Posted by CRS

Are you getting the retrofit to a non-prewired car?

If so, where did you get it done? Or are you doing it yourself?

I did mine myself. The instructions list it at 5 hours sedan and 8 hours coupe so it would cost too much to have the dealer install it.

CRS · 05-13-2010, 11:25 PM

Quote:

Originally Posted by srcstc

I did mine myself. The instructions list it at 5 hours sedan and 8 hours coupe so it would cost too much to have the dealer install it.

Yeah, I have the instructions myself.

I was just asking Canuck cause both he and I live in Vancouver.

Do you have comfort access? If not, can you list out the exact parts numbers you used to get everything installed?

JohnnyCanuck · 05-16-2010, 11:32 AM

Hey CRS,

So far, haven't taken that step. According to BMW Canada, the kit is not available so I would have to order it from the US and get someone locally to do it. I've asked my dealer and am waiting to hear (BMW Store) but I doubt they'll be much help given recent experience.

Was thinking of asking another dealer or someone like NSAV or Ralph's if they'd do it.

srcstc, back to the mirror question. Is the only use of the mirror the clown nose? If so, could an LED be installed (mirror base?) and the wires run to a simply blue or red LED without having to replace the whole mirror?

01-18-2010, 12:20 AM	#23
amlebede Captain Drives: 2006 BMW 330i Join Date: Apr 2009 Location: Chapel Hill, NC Posts: 613 iTrader: (0)	Waste of money. Just go aftermarket. __________________ 2006 Black BMW 330i, Black interior, ZSP, ZPP, Logic 7, Xenon, Ipod, Satellite Radio Preparation, Moonroof, 12'' 2 P2 subwoofers running on KAC-7204 amplifier, Hardwired Escort Passport 8500, Hardwired Garmin Nuvi 650 on Kuda Mount. tutor,math tutoring,math tutoring,test prep,tutoring jobs,tutoring blog

04-21-2010, 07:18 PM	#32
VP Electricity Brigadier General Drives: 2007 E91 328 xi Join Date: Jan 2008 Location: portland oregon Posts: 3,089 iTrader: (3)	Anyone else get this going? __________________ musicar northwest portland or musicarnw.com BMW systems and subwoofers

05-09-2010, 08:25 AM	#34
srcstc Major Drives: 09 TiAg E92 335i M-Sport Join Date: Sep 2006 Location: NJ Posts: 1,244 iTrader: (5)	The easy way to remove the panel behind the moonroof: Grab it at the front (top in this photo) with your finger nails and pull back then down. Pulling it back compresses the 2 metal clips (pictured on the bottom) and you can just pull the front down. __________________ 2009 E92 335i M-Sport TiAg\|Black\|Aluminum -ZMP\|ZPP\|NAV\|CA\|Heated Seats\|6MT BMW Performance Exhaust \| Rear Fogs \| OEM Black Grills Installer for BimmerTech Pioneer AVIC-Z110BT:

05-11-2010, 12:16 PM	#35
srcstc Major Drives: 09 TiAg E92 335i M-Sport Join Date: Sep 2006 Location: NJ Posts: 1,244 iTrader: (5)	Finally DONE! What a PITA too. Just have to get it activated. I've got Mirror LED and the alarm goes off if you open the door. No chirp or motion sensor yet (till it's activated.) __________________ 2009 E92 335i M-Sport TiAg\|Black\|Aluminum -ZMP\|ZPP\|NAV\|CA\|Heated Seats\|6MT BMW Performance Exhaust \| Rear Fogs \| OEM Black Grills Installer for BimmerTech Pioneer AVIC-Z110BT:

05-11-2010, 03:35 PM	#37
srcstc Major Drives: 09 TiAg E92 335i M-Sport Join Date: Sep 2006 Location: NJ Posts: 1,244 iTrader: (5)	Does yours have the red clown-nose? And do you have an auto-dimming mirror? __________________ 2009 E92 335i M-Sport TiAg\|Black\|Aluminum -ZMP\|ZPP\|NAV\|CA\|Heated Seats\|6MT BMW Performance Exhaust \| Rear Fogs \| OEM Black Grills Installer for BimmerTech Pioneer AVIC-Z110BT:

01-31-2010, 12:07 PM	#29
CRS First Lieutenant Drives: 2009 323i Join Date: Dec 2009 Location: Vancouver Posts: 321 iTrader: (3)	Been a while... Anything yet?

02-23-2010, 03:05 AM	#30
zellex Private First Class Drives: 2010 BMW 335xi Join Date: Oct 2009 Location: St. Louis, MO Posts: 124 iTrader: (1)	Anything now? I'm looking for this since...http://www.e90post.com/forums/showthread.php?t=354077

02-25-2010, 08:30 AM	#31
claykin Major Drives: 2013 335i M-Sport Join Date: Nov 2009 Location: Florida Posts: 1,353 iTrader: (0)	I was given part #61 12 2 163 192 for the accessory cable req'd for non pre-wire cars that do not have CA.

05-11-2010, 03:10 PM	#36
JohnnyCanuck Private Drives: 328i xDrive Join Date: Oct 2009 Location: Vancouver Posts: 99 iTrader: (0)	Awesome that you got it installed and working. Quick question ... is there an easy way to tell whether you have the right mirror?

05-11-2010, 03:39 PM	#38
JohnnyCanuck Private Drives: 328i xDrive Join Date: Oct 2009 Location: Vancouver Posts: 99 iTrader: (0)	Auto-dimming with compass ... but no clown nose. There is a little white square on the back of the mirror that looks like an LED, but it is definitely not a clown nose.

05-11-2010, 04:03 PM	#40
JohnnyCanuck Private Drives: 328i xDrive Join Date: Oct 2009 Location: Vancouver Posts: 99 iTrader: (0)	Thanks ...

05-16-2010, 11:32 AM	#44
JohnnyCanuck Private Drives: 328i xDrive Join Date: Oct 2009 Location: Vancouver Posts: 99 iTrader: (0)	Hey CRS, So far, haven't taken that step. According to BMW Canada, the kit is not available so I would have to order it from the US and get someone locally to do it. I've asked my dealer and am waiting to hear (BMW Store) but I doubt they'll be much help given recent experience. Was thinking of asking another dealer or someone like NSAV or Ralph's if they'd do it. srcstc, back to the mirror question. Is the only use of the mirror the clown nose? If so, could an LED be installed (mirror base?) and the wires run to a simply blue or red LED without having to replace the whole mirror?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search