KW V2 and V3 true coilover conversion kit - Page 2 - BMW 3-Series (E90 E92) Forum

HP Autowerks · 06-06-2011, 02:54 AM

If you currently own a KW V-series coilover kit, this true coilver conversion kit with custom Swift springs will make a drastic improvment in not only handling or your car, but also ride quality.

pbdm4k · 09-01-2011, 02:33 PM

Are the rear spring perches double the height of the stock KW V3 ones?
I find that the rear perches on my V3's even at max height is too low for me. (The wheels are always tucked even at the highest setting).

Is is possible to only purchase the rear perches so I can get the height I want?
(I'd like my KW V3's to be just a tad lower than stock height).

HP Autowerks · 09-01-2011, 04:22 PM

Quote:

Originally Posted by pbdm4k

Are the rear spring perches double the height of the stock KW V3 ones?
I find that the rear perches on my V3's even at max height is too low for me. (The wheels are always tucked even at the highest setting).

Is is possible to only purchase the rear perches so I can get the height I want?
(I'd like my KW V3's to be just a tad lower than stock height).

Yes, we sell those on their own. They are not twice as tall, but they are 1" taller. As the motion ratio should have it, 1" of adjustment at the spring location is nearly 2" at the wheel in ride height so you have plenty.

Order here:

http://www.hpashop.com/product.sc?pr...categoryId=238

pbdm4k · 09-02-2011, 02:58 PM

I noticed there's no notches in the collar for adjusting the height with a wrench.

Seeing as that's the case, will my KW collars work on your perch?

HP Autowerks · 10-23-2011, 07:28 PM

Quote:

Originally Posted by pbdm4k

I noticed there's no notches in the collar for adjusting the height with a wrench.

Seeing as that's the case, will my KW collars work on your perch?

No, there is no notches needed. You can turn our adjusters by hand with the thrust sheets installed.

No, the KW collars will not fit our threaded body.

HP Autowerks · 01-17-2012, 10:37 PM

Convert yout KW V-series to a true coilover system today!

HP Autowerks · 03-30-2012, 05:44 PM

To the top

HP Autowerks · 07-09-2012, 08:21 PM

Top the KW to Swift spring coil over conversion with a set of Vorshlag camber plates! All KW configuration in stock.

HP Autowerks · 07-25-2012, 02:08 AM

Convert your KW today for more performance.

HP Autowerks · 10-12-2012, 05:37 PM

You can make your poor performing KW V series with this Swift upgrade!

HP Autowerks · 01-25-2013, 12:48 PM

Swift spring conversion for your KW V series.

HP Autowerks · 01-28-2013, 05:44 PM

Because of higher than expected demand all E8x/E9x camber plates are on back order until Feb. 18th.

Standard conversion kits using stock upper mounts are still available!

HP Autowerks · 03-14-2013, 07:58 PM

Bump!

FunnyFarm · 05-10-2013, 03:03 AM

Free bump

09-01-2011, 02:33 PM	#24
pbdm4k Lieutenant Colonel Drives: 2009 335i xDrive Join Date: May 2007 Location: Toronto Posts: 1,618 iTrader: (3)	Are the rear spring perches double the height of the stock KW V3 ones? I find that the rear perches on my V3's even at max height is too low for me. (The wheels are always tucked even at the highest setting). Is is possible to only purchase the rear perches so I can get the height I want? (I'd like my KW V3's to be just a tad lower than stock height). __________________ On Forced Induction ~ "It isn't forced if she takes it willingly." ~ 1999 Audi A4 Quattro 1.8T ~ K&N \| PowerSlot 2000 VW Jetta 1.85T ~ Autotech \| Eurojet \| Falken \| Forge Motorsport \| GHL \| Hawk \| K&N \| KKK \| Magnaflow \| Neuspeed \| Pauter \| PowerSlot \| VW Motorsport \| Weisco

09-02-2011, 02:58 PM	#26
pbdm4k Lieutenant Colonel Drives: 2009 335i xDrive Join Date: May 2007 Location: Toronto Posts: 1,618 iTrader: (3)	I noticed there's no notches in the collar for adjusting the height with a wrench. Seeing as that's the case, will my KW collars work on your perch? __________________ On Forced Induction ~ "It isn't forced if she takes it willingly." ~ 1999 Audi A4 Quattro 1.8T ~ K&N \| PowerSlot 2000 VW Jetta 1.85T ~ Autotech \| Eurojet \| Falken \| Forge Motorsport \| GHL \| Hawk \| K&N \| KKK \| Magnaflow \| Neuspeed \| Pauter \| PowerSlot \| VW Motorsport \| Weisco

01-17-2012, 10:37 PM	#28
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	KW to Swift spring true coilover conversion kit Convert yout KW V-series to a true coilover system today!

07-25-2012, 02:08 AM	#31
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Convert your KW today for more performance. Attached Images

01-25-2013, 12:48 PM	#33
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	KW to Swift conversion kit Swift spring conversion for your KW V series.

06-06-2011, 02:54 AM	#23
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	If you currently own a KW V-series coilover kit, this true coilver conversion kit with custom Swift springs will make a drastic improvment in not only handling or your car, but also ride quality.

03-30-2012, 05:44 PM	#29
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	To the top

07-09-2012, 08:21 PM	#30
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Top the KW to Swift spring coil over conversion with a set of Vorshlag camber plates! All KW configuration in stock.

10-12-2012, 05:37 PM	#32
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	You can make your poor performing KW V series with this Swift upgrade!

01-28-2013, 05:44 PM	#34
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Because of higher than expected demand all E8x/E9x camber plates are on back order until Feb. 18th. Standard conversion kits using stock upper mounts are still available!

03-14-2013, 07:58 PM	#35
HP Autowerks BimmerPost Supporting Vendor Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,050 iTrader: (26)	Bump!

05-10-2013, 03:03 AM	#36
FunnyFarm Registered Drives: 2010 E92 M Sport Join Date: Oct 2012 Location: Las Vegas Posts: 3 iTrader: (0)	First reply... Free bump

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search