Login
![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
I'm going to shoot those BMW techs
![]() |
![]() |
01-23-2010, 04:14 PM | #1 |
Captain
![]() ![]() ![]() ![]() 48
Rep 766
Posts |
I'm going to shoot those BMW techs
I think they fused my oil cap down. The green indicator dot is like almost an inch beyond where it should be. I'm just gonna let it cool down (and my temper) some more before trying again. I'm almost yanking the car off the ramps trying to get this thing off. Something so simple made difficult by morons. Absolutely no reason for this nonsense.
Please don't tell me the oil cap unscrews in a clockwise direction.
__________________
My Original Car 335I Coupe / Space / Black Dakota / Gray Poplar / ZSP / ZPP / Step / Paddles / Nav / Hot Seats / IPOD/ Xpel HL
|
01-23-2010, 04:19 PM | #2 | |
Major General
![]() ![]() ![]() 731
Rep 6,771
Posts |
Quote:
Good luck and stay calm. If you can't back it out, call leave a message with the dealer ASAP telling them you're brining the car in to have a tech unscrew it by 1/4 turn. |
|
Appreciate
0
|
01-23-2010, 04:35 PM | #3 |
Banned
-83
Rep 3,415
Posts |
The green mark you refer to is not a reference mark for the tightness of the oil filter cap when reassembling it after an oil change. The green dot is a production mark put there by the engine builder who assembled the oil filter. It is an inspection mark to show the cap has been properly torqued during assembly. When reassembled after an oil change the marks don't necessarily need to line up. Get the proper filter cap wrench and you will have no problem removing it.
It is a right-hand thread and unscrews counter-clockwise. |
Appreciate
0
|
01-23-2010, 04:37 PM | #4 |
Captain
![]() ![]() ![]() ![]() 48
Rep 766
Posts |
GOT IT! Ok..I'm letting the techs off the hook. I realized when I was wrapping the oil wrench around the cap I was a little to low and grabbing the engine block instead of the side. No wonder I was having juuusssttt a bit of trouble.
Now to finish the oil change (the first one on this car since I'm out of warranty in about 100 miles) CHeers
__________________
My Original Car 335I Coupe / Space / Black Dakota / Gray Poplar / ZSP / ZPP / Step / Paddles / Nav / Hot Seats / IPOD/ Xpel HL
|
Appreciate
0
|
01-23-2010, 07:49 PM | #5 |
Captain
![]() ![]() ![]() ![]() 48
Rep 766
Posts |
Ok that wasn't too bad...my only issue was the rhino ramps slipping and clearance issues. I had to buy couple rubber mats at lowes so since my concrete floor is really slick and the ramp kept getting pushed away when I'd try and drive up the ramp. I also had to put a coule 1x4's at the base of the ramp so that rubber piece that hangs down in front would clear the ramp. Took some patience but no big issues. I love having the oil filter in such an easily accessible spot but it does got a little messier of course than you typical oil filter replacement. FYI I use the 12000lb rhino ramps.
__________________
My Original Car 335I Coupe / Space / Black Dakota / Gray Poplar / ZSP / ZPP / Step / Paddles / Nav / Hot Seats / IPOD/ Xpel HL
|
Appreciate
0
|
![]() |
Bookmarks |
Thread Tools | Search this Thread |
|
|