Dinan Intake - Page 3 - BMW 3-Series (E90 E92) Forum

Driv3r · 11-02-2006, 07:11 PM

Quote:

Originally Posted by ksfrogman

FYI, the Gruppe M intake uses the left plastic wheel well as one of its sides. This means that if you were to open a hole there, it would suck in cold air (along with the water and mud). The brake duct is in close proximity as is the area between the brake duct and fog light (on the M-Tech bumper). K&N makes several custom fittings including a flange and tubing that can be bolted onto a modified grille.

The idea is to increase the intake of CLEAN cold air.

K&N makes custom fittings and tubing???im looking this up! sounds good, if you have a link that b sick

Driv3r · 11-02-2006, 10:24 PM

cant find anything!!!! help!

ksfrogman · 11-02-2006, 10:40 PM

Quote:

Originally Posted by Driv3r

K&N makes custom fittings and tubing???im looking this up! sounds good, if you have a link that b sick

Sorry, I guess I didn't explain that too well. I meant that K&N makes flanges, tubes, and accessories that you can use to customize your own particular application. I bought these a couple of months ago. They're still sitting in my garage. If I have the chance I'll take some photos and post them.

ksfrogman · 11-03-2006, 02:01 PM

Okay, I finally have the day off to play! Here are the pics I promised. I was wrong. It's not K&N, but generic aftermarket parts.

just4kickz · 11-03-2006, 02:53 PM

does this mean you have to cut another hole into the intake for the other duct? would u actually do this to your pretty gruppe m?

Driv3r · 11-04-2006, 12:45 PM

hmm i would do this to a simota, but not a gruppeM even though youll get even GREATER HP (optimistically)

ksfrogman · 11-04-2006, 12:55 PM

Quote:

Originally Posted by just4kickz

does this mean you have to cut another hole into the intake for the other duct? would u actually do this to your pretty gruppe m?

Not at all. If you look at the GruppeM design, it utilizes the front and sides of the engine compartment as part of its sides. That's the novelty of this.

Here's the underside pic.

Driv3r · 11-04-2006, 01:35 PM

Quote:

Originally Posted by ksfrogman

Not at all. If you look at the GruppeM design, it utilizes the front and sides of the engine compartment as part of its sides. That's the novelty of this.

Here's the underside pic.

WHOAH I NEVER KNEW THAT!

Carnage · 11-04-2006, 01:49 PM

After seeing the materials Dinan used for the intake I decided to put together a DIY for the intake with pictures to make it easy. Hope it's useful for everyone.

1) Go to Dinan's website and order intake.
2) Go to toilet and deposit checkbook, wallet, etc.
3) Flush money down toilet.
4) You're all set and ready to hit the open road!

Note to Mod's: Any chance I can get a sticky for this in the DIY section?

just4kickz · 11-04-2006, 02:55 PM

lol checkbook... a bum finds it on the other side of town and uses it to buy his juice

ksfrogman · 11-04-2006, 04:02 PM

Quote:

Originally Posted by matsarge

After seeing the materials Dinan used for the intake I decided to put together a DIY for the intake with pictures to make it easy. Hope it's useful for everyone.

1) Go to Dinan's website and order intake.
2) Go to toilet and deposit checkbook, wallet, etc.
3) Flush money down toilet.
4) You're all set and ready to hit the open road!

Note to Mod's: Any chance I can get a sticky for this in the DIY section?

When you think about it, you can buy a nice vacuum cleaner for that price, and use the extra accessories for your car.

OR

Carnage · 11-04-2006, 04:07 PM

Quote:

Originally Posted by ksfrogman

When you think about it, you can buy a nice vacuum cleaner for that price, and use the extra accessories for your car.

OR

LOL! Half of those pieces look like something off my new Bissell. Just use a long hose and someone could have an intake/vaccum cleaner for the car, now that's a great use of technology. I can see the marketing slogan now, "Only with the new Dinan can you get 10 more HP and carpet clean enough to eat your lunch off of."

1001 · 11-04-2006, 10:32 PM

well the dealer gave me a call yesterday to let me know that the intake is there, and i made an appointment to get it install on tuesday. we'll all see how it is on tuesday. maybe its not that bad as you guys say or maybe not bad at all. we'll all have to wait and see.

ksfrogman · 11-05-2006, 01:58 AM

Quote:

Originally Posted by 1001

well the dealer gave me a call yesterday to let me know that the intake is there, and i made an appointment to get it install on tuesday. we'll all see how it is on tuesday. maybe its not that bad as you guys say or maybe not bad at all. we'll all have to wait and see.

Take some pictures if you can, especially during the install. I'm curious to see where the route the tube.

Driv3r · 11-05-2006, 03:08 AM

haha i was craking up on the DIY

Joe Bimmer · 11-05-2006, 10:16 AM

Quote:

Originally Posted by ksfrogman

Take some pictures if you can, especially during the install. I'm curious to see where the route the tube.

+1. Also, take some pictures of them drilling that Dinan plaque into your airbox. I'm sure that's good for at least 3 of the 5 claimed HP. I want to see what brand of self-tapping screws they use.

Driv3r · 11-05-2006, 12:53 PM

Damn, i cant do this mod...i have the ACS front lip and that blocks out that grill section to the side of the brakeducts...

ksfrogman · 11-05-2006, 01:04 PM

Quote:

Originally Posted by Driv3r

Damn, i cant do this mod...i have the ACS front lip and that blocks out that grill section to the side of the brakeducts...

Over the past several months I have been thinking of all sorts of options from placing a duct on the fender itself, to utilizing a M-like front fender grille to channel air in, but then decided it best if I take advantage of the RAM air effect.

You could always remove and replace the existing brake duct. I've been thinking of removing it, taking it to a machine shop, and having them make me one out of aluminum with an extra opening for the air intake. What do you think about that idea?

Driv3r · 11-05-2006, 01:25 PM

Quote:

Originally Posted by ksfrogman

Over the past several months I have been thinking of all sorts of options from placing a duct on the fender itself, to utilizing a M-like front fender grille to channel air in, but then decided it best if I take advantage of the RAM air effect.

You could always remove and replace the existing brake duct. I've been thinking of removing it, taking it to a machine shop, and having them make me one out of aluminum with an extra opening for the air intake. What do you think about that idea?

thinking out of the box!.....thats a very good idea, i dont know where any metal shops are arund here but i should start looking for one. Maybe i wont even need to go to a metal shop, but just make an incision on the brake duct and make the air come from that, but it might not give sufficient cooling since there will be less air to it..what do you think?

ksfrogman · 11-05-2006, 01:34 PM

Quote:

Originally Posted by Driv3r

thinking out of the box!.....thats a very good idea, i dont know where any metal shops are arund here but i should start looking for one. Maybe i wont even need to go to a metal shop, but just make an incision on the brake duct and make the air come from that, but it might not give sufficient cooling since there will be less air to it..what do you think?

I thought about that idea, but if you look at it, the duct is divided into two sections, and the seam that connects it is on the top.

Driv3r · 11-05-2006, 03:49 PM

i ust looked at the ducts, there is a divider, im going to think what i can do...

ward · 11-05-2006, 06:04 PM

Quote:

Originally Posted by Joe Bimmer

+1. Also, take some pictures of them drilling that Dinan plaque into your airbox. I'm sure that's good for at least 3 of the 5 claimed HP. I want to see what brand of self-tapping screws they use.

I'm guessing you get a new cover for the airbox rather than affixing the badge yourself

11-02-2006, 10:24 PM	#46
Driv3r Colonel Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL Posts: 2,358 iTrader: (8) Garage List 2006 325i [0.00]	cant find anything!!!! help! __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting

11-03-2006, 02:01 PM	#48
ksfrogman Major General Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA Posts: 6,749 iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	Okay, I finally have the day off to play! Here are the pics I promised. I was wrong. It's not K&N, but generic aftermarket parts. Attached Images __________________

11-03-2006, 02:53 PM	#49
just4kickz boku no namae ha... Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ Posts: 10,576 iTrader: (11) Garage List 2006 E90 330i [0.00]	does this mean you have to cut another hole into the intake for the other duct? would u actually do this to your pretty gruppe m? __________________ looking for a PreLCI Black Sapphire e90 front bumper without license plate holes "Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull**. Where the are my akimbo interventions then?! One scope on each eye mother**er!!"

11-04-2006, 12:45 PM	#50
Driv3r Colonel Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL Posts: 2,358 iTrader: (8) Garage List 2006 325i [0.00]	hmm i would do this to a simota, but not a gruppeM even though youll get even GREATER HP (optimistically) __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting

11-04-2006, 01:49 PM	#53
Carnage Lieutenant General Drives: people insane Join Date: Jun 2005 Location: classified Posts: 16,404 iTrader: (2)	Dinan Intake Install - DIY After seeing the materials Dinan used for the intake I decided to put together a DIY for the intake with pictures to make it easy. Hope it's useful for everyone. 1) Go to Dinan's website and order intake. 2) Go to toilet and deposit checkbook, wallet, etc. 3) Flush money down toilet. 4) You're all set and ready to hit the open road! Note to Mod's: Any chance I can get a sticky for this in the DIY section? Attached Images

11-04-2006, 02:55 PM	#54
just4kickz boku no namae ha... Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ Posts: 10,576 iTrader: (11) Garage List 2006 E90 330i [0.00]	lol checkbook... a bum finds it on the other side of town and uses it to buy his juice __________________ looking for a PreLCI Black Sapphire e90 front bumper without license plate holes "Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull**. Where the are my akimbo interventions then?! One scope on each eye mother**er!!"

11-04-2006, 10:32 PM	#57
1001 Captain Drives: 06' 325i/08' 350z/09' 128i Join Date: Apr 2006 Location: San francisco Posts: 830 iTrader: (0)	well the dealer gave me a call yesterday to let me know that the intake is there, and i made an appointment to get it install on tuesday. we'll all see how it is on tuesday. maybe its not that bad as you guys say or maybe not bad at all. we'll all have to wait and see.

11-05-2006, 03:08 AM	#59
Driv3r Colonel Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL Posts: 2,358 iTrader: (8) Garage List 2006 325i [0.00]	haha i was craking up on the DIY __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting

11-05-2006, 12:53 PM	#61
Driv3r Colonel Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL Posts: 2,358 iTrader: (8) Garage List 2006 325i [0.00]	Damn, i cant do this mod...i have the ACS front lip and that blocks out that grill section to the side of the brakeducts... __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting

11-05-2006, 03:49 PM	#65
Driv3r Colonel Drives: 2006 E46 M3 ZCP Join Date: May 2005 Location: Miami Beach, FL Posts: 2,358 iTrader: (8) Garage List 2006 325i [0.00]	i ust looked at the ducts, there is a divider, im going to think what i can do... __________________ 2006 E46 M3 ZCP 6SPD-Interlagos Blue - 6SPD - SSK - AA Headers -AA Tune - Navigation w/ Splashscreen Mod - 3M Crystalline Series 60 - Carbon Splitters - Swissvax Treated - Bridgestone 2012 Yamaha FZ8 - Matte Black/Grey - Michelin Pilot Pure 2CT - Vortex Rear Sets - Yoshimura R-77D & Fender Delete - Spectro Race Oil - GP Reverse Shifting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search