FORUMS
- 5
|
|
![]() |
![]() |
![]() |
|
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
BMW 3-Series (E90 E92) Forum
>
Exhaust Rattle
|
![]() |
| 03-30-2010, 12:42 PM | #1 |
|
General
|
Exhaust Rattle
I just purchased a used Harmon-Motives Vishnu Exhaust system. When I am on the stock JB3 map, the exhaust system does not rattle but when I put on Map 3 or 5 or anything other than stock, the car rattles because of the exhaust at RPMs between 1500 - 2000. After that RPM range, the rattle goes away. Any thoughts?
__________________
Current: 2013 E92 M3, SSII, Black extended, ZCP, fully loaded
Mods: Black Hood Vents, Black Grilles, Black Side Grilles, Lux H8 v. 4.0, Black ///M Emblem, Evolve Tune, Dinan CF Intake, Dinan Pulley, Akrapovic Evo Retired: 2011.5 E92 M3, SSII |
![]() |
|
| 03-30-2010, 01:34 PM | #2 |
|
The Coding Guy
Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007
Location: Brooklyn, New York
Posts: 17,872
iTrader: (5)
|
Rattle is coming from inside the cabin area. The back center consol and ashtray area. To solve this stuff a small rag I side the cup holder and ashtray and close it shut. Your rattle should be gone. Many people have experienced this and the old rag in the compartments solved the issue
|
![]() |
|
| 03-31-2010, 02:54 PM | #4 |
|
General
|
now i understand why people spend $ on drone free exhaust systems
that rag helped!! thanks!!! but the exhaust itself still rattles ahaha oh well
__________________
Current: 2013 E92 M3, SSII, Black extended, ZCP, fully loaded
Mods: Black Hood Vents, Black Grilles, Black Side Grilles, Lux H8 v. 4.0, Black ///M Emblem, Evolve Tune, Dinan CF Intake, Dinan Pulley, Akrapovic Evo Retired: 2011.5 E92 M3, SSII |
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|