||BMW Garage||BMW Meets||Register||Search||Today's Posts||Mark Forums Read||
BMW 3-Series (E90 E92) Forum
ar design: AMS Product Line-Up Now Available
|03-30-2010, 06:25 PM||#1|
BimmerPost Supporting Vendor
ar design: AMS Product Line-Up Now Available
Here at ar design we welcome AMS Performance as one of our newest product lines!
We carry the AMS 135i/335i Intercooler as well as the AMS 335i Cat-Back Exhaust!
AMS 135i/335i Intercooler - $899.00
The AMS BMW 135i/335i Front Mount Intercooler is the best performing direct bolt on intercooler you can buy. Simply by bolting on this intercooler on a stock car you can expect over 10 wheel horsepower gains. This intercooler has 50% more internal flow area than its stock counterpart, works with the stock piping and only requires small trimming to the plastic bumper support.
This AMS Intercooler features cast aluminum end tanks for added durability with smoother features and geometry. Designed by our engineering team using Solidworks, these A356 T6 Alloy Aluminum end tanks have improved flow over sheet metal end tanks and include gusseted brackets to prevent cracking or failure. Their end tanks dont end there, they also incorporate an industry first 3 inlet and exit port. AMS goes beyond the competition to ensure quality. Each AMS Intercooler is hand TIG welded in a jig for a perfect fit and pressure tested to 50 psi to ensure maximum performance.
AMS tested many intercooler cores to find the best performing units available. Over the past 8 years AMS has tested just about every core available to source the best manufacturer for our kits. The BMW is no exception as this intercooler is manufactured by the same company AMS uses for their 1400hp drag cars and time attack race team.
- 50% more internal flow area than stock
- Smooth flowing cast end tanks allow for better airflow over the competitions sheet metal tanks
- Best performing intercooler on the market and requires less bumper support trimming than the competition.
- Industry first 3 inlet and outlet end tank ports
- Custom molded silicone couplers to optimize airflow volume and velocity.
- Will bolt up to your stock piping or most aftermarket pipe kits that are designed for the stock intercooler.
- Bar and plate style core, the best performing on the market
- All AMS intercoolers are pressure tested after assembly to 50 psi
- Silicone couplers designed to stock and most aftermarket piping.
- Hose clamps
- Intercooler core dimension: 6″ tall, 20″ wide and 6″ thick
- Good for up to 550whp
- Comes with the Black AMS Painted Logo (Optional)
- Slight trimming of plastic bumper support required
- Weighs 17.6 lbs.
- With or without Black AMS logo stencil (Please specify)
- BMW 335i, 335xi, 135i both Automatic and 6-Speed Manual
- Fits all USDM, and European Models
AMS 335i Cat-Back - $1799.00
The AMS BMW 335i (E90/E92) 3 exhaust is the most unique and lightweight system on the market. Developed to optimize exhaust flow while shedding 40lbs of weight from the factory cat-back, this is the ultimate exhaust system for your BMW!
Instead of using dedicated twin pipes AMS utilizes a single 3 primary pipe allowing for not only a substantial reduction in weight but a sound unlike any other systems on the market. This unique design allows for a tame, stock sound at idle while producing a deep rich distinctive note at wide open throttle.
Another unique feature are the V-Band connections. These high quality fasteners allow for easy removal and installation of the entire system. Gone are the days of exhaust gaskets and awkward slip fit joints which can leak. In addition we have a factory first solid downpipe flange allowing for fool-proof downpipe alignment to our cat-back system.
The AMS 3 exhaust system has gone through countless hours of research and development and has been designed to be as free flowing as possibly as well as shed serious weight off your N54 powered BMW. Our exhaust features mandrel bent piping for the best exhaust flow. This system does not have any restrictions like other popular exhaust systems that neck down and hurt performance. Like all other AMS exhaust products this BMW 3 exhaust is TIG welded with 100% 304 stainless components including the flanges and hangers. The system utilizes factory exhaust hangers and includes a high quality polished muffler and matching polished exhaust tips.
- Smooth flow 2.5 to 3 y-pipe
- 3 diameter primary pipe
- Utilizes custom one piece downpipe flange and V-band connections throughout
- 100% Stainless Steel construction. No mild steel flanges or hangers
- Unique sound due to 3 primary pipe and custom muffler
- 40 lbs of weight savings! (52lbs compared to the stock system weighing in at 92)
- Bolts up to the stock downpipes or any aftermarket pipes that bolt to the stock cat-back
- Includes gaskets and hardware and everything needed to install
- Unrivaled fit and finish
- 304 Stainless Steel
- 3 piping .049 wall thickness
- Polished muffler and matching polished tip
- V-Band connections at the muffler and every connection other than the downpipe
- 3/8″ thick Stainless Steel one piece flange at the downpipe
- 52 lbs
- Systems available for E90 or E92 models
- BMW 335i both sedan and coupe models
- Fits all USDM models, European models still undergoing testing
- Fits left hand drive models, right hand drive models under going testing
EMISSIONS STATEMENT: Federal and many state laws prohibit the removal, modification, or rendering inoperative any part that affects emissions on motor vehicles used on public streets or highways. Many Automotosports parts are designated for track use or off-road use only. Installation of certain components may bring the vehicle out of compliance with safety and/or emissions standards. Automotosports recommends that vehicles with parts designated in this fashion not be operated on public roads. Automotosports customers are responsible for complying with applicable state and local environmental regulations.
[u2b]<object width="873" height="525"><param name="movie" value="http://www.youtube.com/v/FPEjS4PnxVU&hl=en_US&fs=1&color1=0x3a3a3a&color2=0 x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FPEjS4PnxVU&hl=en_US&fs=1&color1=0x3a3a3a&color2=0 x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="873" height="525"></embed></object>[/u2b]
|Thread Tools||Search this Thread|