How do you read and clear codes with the Procede??? HELP ASAP! - BMW 3-Series (E90 E92) Forum

stealth-twntrbo · 04-01-2010, 12:54 AM

I need to know how to read codes with my Procede, I'm not sure how to. I also want to know how to clear codes so i can clear any tuner codes if there is any and take the procede out and take it to the dealer.

shiv@vishnu · 04-01-2010, 12:56 AM

stealth-twntrbo · 04-01-2010, 01:15 AM

Shiv, I've tried this and it shows up on my iDrive as engine malfunction, and when i hit the gas pedal it shows up on the idrive, but when i look at my laptop DME Code is 0. So its seems to not be giving me a code even though it does have the engine malfunction light on. I am not sure what to do im pretty sure its the HPFP but I'm gonna take the procede out in the morning hopefully there are not any tuner codes on the ecu. Shiv, I was running the V4 firmwire with the 2-23 Stage 2 maps. When i uploaded the maps the UT was set at %100 and the IC was 100%, and the boost delay was 5ms and the boost limit was 17. I wasn't running max boost and blow my engine did i? When I asked you the other day you said these settings were fine, hope you can shed some light on this.

shiv@vishnu · 04-01-2010, 02:02 AM

Quote:

Originally Posted by stealth-twntrbo

Shiv, I've tried this and it shows up on my iDrive as engine malfunction, and when i hit the gas pedal it shows up on the idrive, but when i look at my laptop DME Code is 0. So its seems to not be giving me a code even though it does have the engine malfunction light on. I am not sure what to do im pretty sure its the HPFP but I'm gonna take the procede out in the morning hopefully there are not any tuner codes on the ecu. Shiv, I was running the V4 firmwire with the 2-23 Stage 2 maps. When i uploaded the maps the UT was set at %100 and the IC was 100%, and the boost delay was 5ms and the boost limit was 17. I wasn't running max boost and blow my engine did i? When I asked you the other day you said these settings were fine, hope you can shed some light on this.

Those settings are fine. Everything is fine. When you check for codes with the procede, the MIL light is illuminated by the procede as a visual confirmation of the code checking process. NOT necessarily as an indication of there being a code present. If the procede software shows "0" for codes, there are no codes. Give us a call tomorrow when you are with your car and we can walk you through the process. It's as easy as can be.

Shiv

Renus · 04-01-2010, 03:12 AM

I think this process is so easy to do and understand, just need you to review the Shiv's uploaded video clips on forum or his own forum only.

04-01-2010, 12:54 AM	#1
stealth-twntrbo Lieutenant Drives: E92 335i Alpine White Join Date: Jun 2009 Location: Michigan Posts: 489 iTrader: (2)	How do you read and clear codes with the Procede??? HELP ASAP! I need to know how to read codes with my Procede, I'm not sure how to. I also want to know how to clear codes so i can clear any tuner codes if there is any and take the procede out and take it to the dealer. __________________ 92 Stealth TT 403 AWHP SOLD, 06 M3 Competition SOLD (Totaled 3/26/12): 08 335i Procede v5 Rev II 7-29 Beta Maps. AFE DCI. AMS Catback Prototype. CP-E Charge Pipe HKS BOV. Raceland DP's. ETS FMIC
	Tweet

04-01-2010, 01:15 AM	#3
stealth-twntrbo Lieutenant Drives: E92 335i Alpine White Join Date: Jun 2009 Location: Michigan Posts: 489 iTrader: (2)	Shiv, I've tried this and it shows up on my iDrive as engine malfunction, and when i hit the gas pedal it shows up on the idrive, but when i look at my laptop DME Code is 0. So its seems to not be giving me a code even though it does have the engine malfunction light on. I am not sure what to do im pretty sure its the HPFP but I'm gonna take the procede out in the morning hopefully there are not any tuner codes on the ecu. Shiv, I was running the V4 firmwire with the 2-23 Stage 2 maps. When i uploaded the maps the UT was set at %100 and the IC was 100%, and the boost delay was 5ms and the boost limit was 17. I wasn't running max boost and blow my engine did i? When I asked you the other day you said these settings were fine, hope you can shed some light on this. __________________ 92 Stealth TT 403 AWHP SOLD, 06 M3 Competition SOLD (Totaled 3/26/12): 08 335i Procede v5 Rev II 7-29 Beta Maps. AFE DCI. AMS Catback Prototype. CP-E Charge Pipe HKS BOV. Raceland DP's. ETS FMIC Last edited by stealth-twntrbo; 04-01-2010 at 01:24 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-01-2010, 12:56 AM	#2
shiv@vishnu Drives: PROcede v5 Join Date: Sep 2006 Location: SF Bay, CA Posts: 16,718 iTrader: (0)

04-01-2010, 03:12 AM	#5
Renus Lieutenant Drives: E92 335i Join Date: Oct 2009 Location: Hong Kong Posts: 518 iTrader: (1)	I think this process is so easy to do and understand, just need you to review the Shiv's uploaded video clips on forum or his own forum only.