APEX ARC-8 Light weight track wheels (18x8.5" 9" 9.5" 10") 1000+ wheels ready to ship - Page 3 - BMW 3-Series (E90 E92) Forum

spanner1751 · 07-08-2011, 11:23 PM

Quote:

Originally Posted by shockin330i

9.5 will fit easy on a lci. I'm running 19x9.5 rear with 35 offset with zero rubbing issues and I'm dropped.

What size tires?

shockin330i · 07-09-2011, 02:50 AM

265

VaDuro · 11-23-2011, 12:36 PM

+1 for the daily driver question>

What is the optimal fitting for a 335XI stock? Will run on track in spring.

I am looking for 18" Sqauare + Spacers in rear or 18" 8.5F / 18 9.5R

Would a 35 offset all around work?

225's up front
265's in the rear

I love the wheel selection!

BiggBoss · 12-18-2011, 04:12 PM

Price set + Delivery to Russia?

krnet2dboi · 06-10-2012, 11:22 AM

Looking for best fitment for E90 328i Pre-LCI stock suspension
Looking to use for a daily driver with bit of a aggressive look.

PM me best price shipped to 91911

And would also like to know white colors you guys carry. I've been seeing red and etc.

rdub · 06-12-2012, 09:02 PM

Is everyone on vaca over there? My last few PM's have gone unanswered...

Evil///M · 06-14-2012, 09:05 PM

By far the best performing and best looking wheels you can put on ANY BMW.

Looking for max concavity for a 335i. What size/offset will make this fitment possible?

Evil///M · 06-29-2012, 12:01 PM

Hello...?

David@ApexRaceParts · 08-03-2012, 01:38 PM

Quote:

Originally Posted by Evil///M

By far the best performing and best looking wheels you can put on ANY BMW.

Looking for max concavity for a 335i. What size/offset will make this fitment possible?

The direct fitment for your 335i would be the 18x8.5" ET38 and 18x9.5" ET35 ARC-8s, which would have the concave faces on the rear. These should be paired up with 235/40/18 and 265/35/18 street tires.

We just restocked on ARC-8s in plenty of sizes! Give us a call if you need a set!

Joe@ApexRaceParts · 08-17-2012, 01:48 PM

We have plenty of ARC-8's in stock in E9x fitments! Please call us for any questions regarding fitment.

David@ApexRaceParts · 08-21-2012, 05:17 PM

Anthracite ARC-8s on an e92 335i:

We have plenty of ARC-8s in stock right now, so give us a call to order yours!

David@ApexRaceParts · 08-28-2012, 05:49 PM

Hyper Silver ARC-8s on an e92 335i:

We have every finish of the ARC-8 in stock right now!

just4kickz · 08-28-2012, 06:26 PM

nice wheels

Evil///M · 08-30-2012, 02:51 AM

Quote:

Originally Posted by David@ApexRaceParts

The direct fitment for your 335i would be the 18x8.5" ET38 and 18x9.5" ET35 ARC-8s, which would have the concave faces on the rear. These should be paired up with 235/40/18 and 265/35/18 street tires.

Ok thanks. Is there any way I would be able to fit 9.0" in the front?

David@ApexRaceParts · 08-30-2012, 12:41 PM

Quote:

Originally Posted by Evil///M

Ok thanks. Is there any way I would be able to fit 9.0" in the front?

Yes you can fit the 18x9.0" ET42 ARC-8 with a spacer in the front of your e92 335i. If you're running a 245/40/18, at least a 5mm spacer is required, and if you plan on the 255/35/18, a 12mm spacer would be needed and would also need about 2 degrees of negative camber.

Joe@ApexRaceParts · 09-05-2012, 02:18 PM

ARC-8's in E9x fitments are in stock!

Please call us with any questions you may have regarding fitment.

David@ApexRaceParts · 09-14-2012, 01:05 PM

We have all finishes of the e9x non-M fitment ARC-8s in stock and ready to ship immediately!

David@ApexRaceParts · 09-17-2012, 05:29 PM

Still have a few sets of ARC-8 wheels in 3-series fitment in stock!

andrew_b · 09-17-2012, 06:41 PM

Hey guys,

My car is an 07 335 E93 (335i). Pretty sure I want to stick to a square setup, since I've been able to dial mine in (right now on stock 17x8) in terms of the right amount of understeer (it's pretty near neutral). Standard suspension now, but will be getting Eibach Pro Kit springs and Koni FSD dampers sometime soon (unless someone shows me a better configuration for what I like). Car is a daily driver with lots of ...ahh...spirited driving, and an occasional HPDE.

Really like the looks of the ARC-8 concave. Would you suggest the 17x9 square setup or something different? Definitely like the concave versions, not sure if they come in the 18x8.5 or if an 18x9 will fit in front....

If you could PM me details for cost shipped to 40514 that would be great as well.

David@ApexRaceParts · 09-17-2012, 06:54 PM

Quote:

Originally Posted by andrew_b

Hey guys,

My car is an 07 335 E93 (335i). Pretty sure I want to stick to a square setup, since I've been able to dial mine in (right now on stock 17x8) in terms of the right amount of understeer (it's pretty near neutral). Standard suspension now, but will be getting Eiback Pro Kit springs and Koni FSD dampers sometime soon (unless someone shows me a better configuration for what I like). Car is a daily driver with lots of ...ahh...spirited driving, and an occasional HPDE.

Really like the looks of the ARC-8 concave. Would you suggest the 17x9 square setup or something different? Definitely like the concave versions, not sure if they come in the 18x8.5 or if an 18x9 will fit in front....

If you could PM me details for cost shipped to 40514 that would be great as well.

The 17x9.0" ET30 concave face can work for your e93 335i. The 17x9.0" ET30 is recommended for a track setup with either a 245 or 255 street tire. Depending on the tire you choose, the rear may require a fender roll to alleviate tire rubbing onto the fender as extreme performance tires tend to run wider than most street tires.

You can get the 18x9.0" ET42 to work with your 335i as well, but it does not have the concave face that you want, and would require a spacer in the front.

andrew_b · 09-17-2012, 07:15 PM

Quote:

Originally Posted by David@ApexRaceParts

The 17x9.0" ET30 concave face can work for your e93 335i. The 17x9.0" ET30 is recommended for a track setup with either a 245 or 255 street tire. Depending on the tire you choose, the rear may require a fender roll to alleviate tire rubbing onto the fender as extreme performance tires tend to run wider than most street tires.

You can get the 18x9.0" ET42 to work with your 335i as well, but it does not have the concave face that you want, and would require a spacer in the front.

Thanks for the quick reply and PM, David!

If I ran 255/40 street tires, would I need to roll the rear fender? Car is pre-LCI.

David@ApexRaceParts · 09-18-2012, 12:44 PM

Quote:

Originally Posted by andrew_b

Thanks for the quick reply and PM, David!

If I ran 255/40 street tires, would I need to roll the rear fender? Car is pre-LCI.

You shouldn't need to roll the rear fenders with the 255/40 street tires with the 17x9.0" ET30 on a pre-LCI unless you run a really wide tire such as a Hankook RS-3. Even then, it may only be a very light roll depending on your alignment settings.

07-09-2011, 02:50 AM	#46
shockin330i Brigadier General Drives: blue Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) Posts: 4,207 iTrader: (1)	265 __________________ ERnie 2011 AW/e90/n55 12.9@107.53mph *N55 Moderator* I'm crawling similar to a ant cuz I'm low to the earth

11-23-2011, 12:36 PM	#47
VaDuro Second Lieutenant Drives: 335xi Join Date: Nov 2011 Location: South NYC Posts: 216 iTrader: (2)	Fitment Question +1 for the daily driver question> What is the optimal fitting for a 335XI stock? Will run on track in spring. I am looking for 18" Sqauare + Spacers in rear or 18" 8.5F / 18 9.5R Would a 35 offset all around work? 225's up front 265's in the rear I love the wheel selection!

06-10-2012, 11:22 AM	#49
krnet2dboi Captain Drives: 2008 328i Base Join Date: Aug 2011 Location: New YOrk Posts: 885 iTrader: (2)	Looking for best fitment for E90 328i Pre-LCI stock suspension Looking to use for a daily driver with bit of a aggressive look. PM me best price shipped to 91911 And would also like to know white colors you guys carry. I've been seeing red and etc. __________________ There are only two types of cars in the world; BMW and the Rest

06-12-2012, 09:02 PM	#50
rdub Lieutenant Drives: '07 E90 335i Join Date: Jun 2010 Location: Syracuse, NY Posts: 515 iTrader: (7) Garage List 2007 E90 335i [5.00]	Is everyone on vaca over there? My last few PM's have gone unanswered... __________________ '07 E90 335i TiAg/Sport/Premium/Cold Weather/Comfort JB4, AE exhaust, AA downpipes, ETS FMIC, Vishnu DCI, ETS charge pipe, Tial BOV, BMS OCC H&R Touring Cup Kit, Linea Corse 818, General G-Max AS-03

06-14-2012, 09:05 PM	#51
Evil///M Professional Hitman Drives: 335i Street. E36 M3 Track. Join Date: Feb 2011 Location: 719/856 Posts: 403 iTrader: (6) Garage List 2007 335i [4.25]	By far the best performing and best looking wheels you can put on ANY BMW. Looking for max concavity for a 335i. What size/offset will make this fitment possible? Last edited by Evil///M; 06-15-2012 at 01:28 AM.

12-18-2011, 04:12 PM	#48
BiggBoss Enlisted Member Drives: BMW 325XI Join Date: Oct 2011 Location: Russia Posts: 49 iTrader: (0)	Price set + Delivery to Russia?

06-29-2012, 12:01 PM	#52
Evil///M Professional Hitman Drives: 335i Street. E36 M3 Track. Join Date: Feb 2011 Location: 719/856 Posts: 403 iTrader: (6) Garage List 2007 335i [4.25]	Hello...? __________________

08-17-2012, 01:48 PM	#54
Joe@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 428 iTrader: (0)	We have plenty of ARC-8's in stock in E9x fitments! Please call us for any questions regarding fitment. __________________ \| * Joe V. \| 888.499.9135 x803 \| joe@apexraceparts.com \| Facebook \| Blog \| Last edited by Joe@ApexRaceParts; 08-17-2012 at 02:05 PM.

08-21-2012, 05:17 PM	#55
David@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 480 iTrader: (0)	Anthracite ARC-8s on an e92 335i: We have plenty of ARC-8s in stock right now, so give us a call to order yours! __________________ \| David D. \| 888.499.9135 x802 \| david@apexraceparts.com \| Facebook \| Blog \|

08-28-2012, 05:49 PM	#56
David@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 480 iTrader: (0)	Hyper Silver ARC-8s on an e92 335i: We have every finish of the ARC-8 in stock right now! __________________ \| David D. \| 888.499.9135 x802 \| david@apexraceparts.com \| Facebook \| Blog \|

08-28-2012, 06:26 PM	#57
just4kickz boku no namae ha... Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ Posts: 10,572 iTrader: (11) Garage List 2006 E90 330i [0.00]	nice wheels __________________ looking for a PreLCI Black Sapphire e90 front bumper without license plate holes "Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull**. Where the are my akimbo interventions then?! One scope on each eye mother**er!!"

09-05-2012, 02:18 PM	#60
Joe@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 428 iTrader: (0)	ARC-8's in E9x fitments are in stock! Please call us with any questions you may have regarding fitment. __________________ \| * Joe V. \| 888.499.9135 x803 \| joe@apexraceparts.com \| Facebook \| Blog \| Last edited by Joe@ApexRaceParts; 09-05-2012 at 02:28 PM.

09-14-2012, 01:05 PM	#61
David@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 480 iTrader: (0)	We have all finishes of the e9x non-M fitment ARC-8s in stock and ready to ship immediately! __________________ \| David D. \| 888.499.9135 x802 \| david@apexraceparts.com \| Facebook \| Blog \|

09-17-2012, 05:29 PM	#62
David@ApexRaceParts BimmerPost Supporting Vendor Drives: M3 Join Date: Jun 2012 Location: Bay Area Posts: 480 iTrader: (0)	Still have a few sets of ARC-8 wheels in 3-series fitment in stock! __________________ \| David D. \| 888.499.9135 x802 \| david@apexraceparts.com \| Facebook \| Blog \|

09-17-2012, 06:41 PM	#63
andrew_b Private First Class Drives: 2007 E93 N54 Join Date: Sep 2011 Location: Lexington, KY Posts: 169 iTrader: (0)	Hey guys, My car is an 07 335 E93 (335i). Pretty sure I want to stick to a square setup, since I've been able to dial mine in (right now on stock 17x8) in terms of the right amount of understeer (it's pretty near neutral). Standard suspension now, but will be getting Eibach Pro Kit springs and Koni FSD dampers sometime soon (unless someone shows me a better configuration for what I like). Car is a daily driver with lots of ...ahh...spirited driving, and an occasional HPDE. Really like the looks of the ARC-8 concave. Would you suggest the 17x9 square setup or something different? Definitely like the concave versions, not sure if they come in the 18x8.5 or if an 18x9 will fit in front.... If you could PM me details for cost shipped to 40514 that would be great as well. __________________ 2007 E93 N54 Last edited by andrew_b; 09-17-2012 at 07:21 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search