BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Cosmetic and Lighting Modifications (exterior/interior) > Replica e90 M3 trunk lip fitment question

Thread Tools Search this Thread
      04-19-2011, 08:24 PM   #1
Second Lieutenant
Rampage9's Avatar

Drives: 2009 328i
Join Date: Jan 2010
Location: Woodbridge Ont.

iTrader: (3)

Replica e90 M3 trunk lip fitment question

I bought a replica e90 M3 trunk lip, and I want to know whether this fitment will work out OK.

It is polyurethane (PU) plastic.

The curvature does not follow the trunk line when looking from above (this is with the lip centered, sitting 1/4" to from the edge in the moddle like OE), as you can see the two ends are short and too far forward - the gap is growing from the 1/4" in the middle to much more at the ends.

The lip will bend to meet the correct shape, but will the double sided tape hold it there? Espically after temperature cycles? Even though the polyurethane is pretty flexible, there is a lot of spring-back in the plastic.

I'm also worried that the paint will look wavy after it is bent into shape.

Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 07:44 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST