E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > BMW CODING success



Reply
 
Thread Tools Search this Thread
      12-16-2010, 04:03 AM   #507
turbocomppro
Private First Class
turbocomppro's Avatar
China
5
Rep
179
Posts

 
Drives: Bone Stock 2007 320i
Join Date: Oct 2009
Location: China

iTrader: (0)

Ok so from GenePoole's DWAI settings, I have the follow differences: (his settings)

QUIT_AKUST_SCHAERF
aktiv (nicht_aktiv)

DEF_QUIT_AKUST_ENTSCH
nicht_aktiv (aktiv)

DEF_QUIT_AKUST_SCHAERF_KL
nicht_aktiv (aktiv)

PIAU_AKUST_ENTSCH
nicht_aktiv (aktiv)

PIAU_AKUST_SCHAERF_KLAPPE
nicht_aktiv (aktiv)

The first setting is the chirp when disarming
The 2 DEF and PIAU I have no idea what they do.
I guess I'll just apply it to my car and see what happens... Anyone know what those 4 do?

Last edited by turbocomppro; 12-16-2010 at 05:25 AM.
Appreciate 0
      12-16-2010, 08:47 AM   #508
AW128i
Major
AW128i's Avatar
United_States
18
Rep
1,004
Posts

 
Drives: E82 N51
Join Date: Nov 2010
Location: Southeastern, PA

iTrader: (1)

Send a message via AIM to AW128i
Eventually I want to add the factory alarm, but Iím not sure which option to add to the VO:

S301A ALARM SYSTEMS
S302A THEFT ALARM WITH REMOTE CONTROL
S303A BURGLAR AL. WITH TILT ALARM SENSOR


Also, I retrofitted an auto-dimming interior rearview mirror (no premium pack on my car) and I read rumors that the vehicle needed to be recoded for everything to function 100%, but dismissed them at the time as mere heresay. Looking through the list of vehicle option codes posted, I see there is one for rain sensor and auto-dim mirror: S432A RAIN SENSOR/INT. MIRROR AUTO DIM ACTION. Perhaps the VO does need to be modified for this??
Appreciate 0
      12-16-2010, 09:09 AM   #509
1QuikWS6
No 55mph
1QuikWS6's Avatar
United_States
67
Rep
4,808
Posts

 
Drives: 09 E92 328iX N51 3-Stage ->M6
Join Date: Jul 2009
Location: Blitzburgh, PA

iTrader: (83)

Garage List
No need to do any coding or updates to VO for new mirror to operate correctly.

I went from a plain jane mirror from factory to Auto Dim/Homelink/Compass mirror using the required adapter harness - everything works just as it should

As for the alarm question - I would like to know the same thing as I have to change my VO for the alarm I retrofitted some time ago. By looking at the choices I would say choice would be S303A BURGLAR AL. WITH TILT ALARM SENSOR

but with these cars anything goes...
__________________
2009 328ix E92//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels+Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//MPerf DCT Wheel//M3 GT3 eBrake Handle+Boot//ACS Pedals//M3 Mirrors//LCI Tails w/LUX Rev//DTEC V7 AE+MTec 6000K D1S+HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//BMW PE//MTech Rear Bumper-iS Sport Diffuser//CF Strut Brace//Vishnu OFT//BMW 193M's+Kumho 4X
Appreciate 0
      12-16-2010, 10:52 AM   #510
GenePoole
Lieutenant
9
Rep
537
Posts

 
Drives: '06 E90 330i
Join Date: Apr 2010
Location: Brighton, IL

iTrader: (0)

Quote:
Originally Posted by AW128i View Post
Eventually I want to add the factory alarm, but Iím not sure which option to add to the VO:

S301A ALARM SYSTEMS
S302A THEFT ALARM WITH REMOTE CONTROL
S303A BURGLAR AL. WITH TILT ALARM SENSOR


Also, I retrofitted an auto-dimming interior rearview mirror (no premium pack on my car) and I read rumors that the vehicle needed to be recoded for everything to function 100%, but dismissed them at the time as mere heresay. Looking through the list of vehicle option codes posted, I see there is one for rain sensor and auto-dim mirror: S432A RAIN SENSOR/INT. MIRROR AUTO DIM ACTION. Perhaps the VO does need to be modified for this??
After the actual retrofit (installing the hardware), adding S302A ("$302") to the VO will activate the DWAI and DWAS modules. I don't know what the others do. I haven't tried them, but my alarm does go off when tilted (I jacked it up about 3 inches and it went off).
Appreciate 0
      12-16-2010, 10:58 AM   #511
DESI4life10
Banned
DESI4life10's Avatar
Canada
47
Rep
3,365
Posts

 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

iTrader: (18)

Quote:
Originally Posted by DESI4life10 View Post
Those that have done the halogen headlight to xenon headlight swap, have you tried coding it into the system as opposed to just disabling the cold checks etc?

Disabling the checks won't do much as the car still thinks the car has halogen lights. I was reading some post over at bimmerpost for older generation cars where they coded the car to tell it that xenons are installed.

They then disabled the self leveling feature. I think this is how the coding should be done and would be more oem style.

Has anyone tried it this way yet?
Anyone try this yet?
Appreciate 0
      12-16-2010, 12:35 PM   #512
orangedawg
First Lieutenant
9
Rep
397
Posts

 
Drives: 328xi
Join Date: Mar 2010
Location: WA

iTrader: (0)

I would like to know the answer about coding out the halogens to tell car xenon installed when using Depos.
Appreciate 0
      12-16-2010, 12:49 PM   #513
Shazmonkee
Shazmonkee's Avatar
United_States
45
Rep
2,457
Posts

 
Drives: BMW E92
Join Date: Feb 2007
Location: United States

iTrader: (11)

Garage List
Send a message via AIM to Shazmonkee
Quote:
Originally Posted by DESI4life10 View Post
Anyone try this yet?
Does this go back to editing the VO?
Appreciate 0
      12-16-2010, 01:19 PM   #514
DESI4life10
Banned
DESI4life10's Avatar
Canada
47
Rep
3,365
Posts

 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

iTrader: (18)

Quote:
Originally Posted by Shazmonkee View Post
Does this go back to editing the VO?
Yea I was wondering that as well.

I am not sure if you can get away with just activating the codes, or if you need to also add it in the VO section.

From the reading I have done on the other forum, it looks like they got it working with just changing the codes to active. They were using it on old generation BMW. I don't think much has changed in terms of xenon headlights.
Appreciate 0
      12-16-2010, 01:56 PM   #515
turbocomppro
Private First Class
turbocomppro's Avatar
China
5
Rep
179
Posts

 
Drives: Bone Stock 2007 320i
Join Date: Oct 2009
Location: China

iTrader: (0)

Blah... I tried every setting... I even try setting all the settings in the DWAI to active and the siren is still "beep" "beep" "beep" when the alarm is tripped. I guess the China siren is just different from the rest of the world...

Anyone selling a used siren?
Appreciate 0
      12-16-2010, 02:08 PM   #516
AW128i
Major
AW128i's Avatar
United_States
18
Rep
1,004
Posts

 
Drives: E82 N51
Join Date: Nov 2010
Location: Southeastern, PA

iTrader: (1)

Send a message via AIM to AW128i
Quote:
Originally Posted by 1QuikWS6 View Post
No need to do any coding or updates to VO for new mirror to operate correctly.

I went from a plain jane mirror from factory to Auto Dim/Homelink/Compass mirror using the required adapter harness - everything works just as it should

As for the alarm question - I would like to know the same thing as I have to change my VO for the alarm I retrofitted some time ago. By looking at the choices I would say choice would be S303A BURGLAR AL. WITH TILT ALARM SENSOR

but with these cars anything goes...
Well the rumor was that the rain sensor behavior would be altered if one installed an auto-dim mirror without making coding changes. It's only rained once since I did the install and I can't really say that I noticed a difference. In any case, I'll leave it alone. Side note about the mirror, is the mirror supposed to "un-dim" when the transmission is put into Reverse? My previous cars with auto-dimming mirrors would "un-dim" in Reverse but my car doesn't seem to exhibit this behavior.

Regarding the alarm, anyone know what the factory option code is on U.S. cars for the factory-installed alarm? That should tell us which option code needs to be added to the VO.

Quote:
Originally Posted by DESI4life10 View Post
Anyone try this yet?
I’m curious about this too, especially since there seems to be a distinction between the HIDs and the leveling device(s). According to the info posted on the previous page, they are separate option codes so perhaps adding S522A XENON-LIGHT will allow HIDs to be installed, since it seems S220A LEVELLING DEVICE and S221A TWO-AXLE LEVELLING DEVICE represent the auto-leveling system. Not that there’s any correlation, but on my previous VW I was able to code the car for HIDs without auto-leveling without a problem, despite no factory cars being equipped with HIDs and without auto-leveling. Heck, I was even able to code the car for HIDs without the bi-xenon shutter, despite all of the factory HIDs being bi-xenons.
Appreciate 0
      12-16-2010, 04:10 PM   #517
DESI4life10
Banned
DESI4life10's Avatar
Canada
47
Rep
3,365
Posts

 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

iTrader: (18)

^^ I am sure you can enable the xenon features and then disable the self levelling codes. This has to work if it worked for previous generations.

Disabling just the cold check won't do much for those that did a straight swap from halogen to oem xenons. You will still get flickers/shut offs.
Appreciate 0
      12-16-2010, 05:00 PM   #518
roadkillrob
Brigadier General
United_States
58
Rep
3,906
Posts

 
Drives: 2008 335Cic, 2011 X5 35i
Join Date: Jul 2007
Location: Boston

iTrader: (14)

Quote:
Originally Posted by xxxjecxxx View Post
We should be able to to steal the latest daten files from progman..

i am almost sure I did this in my install but may have left out of the tutorial, but then again I was using an older version of ncs expert.. I will check my laptop and let you guys know.
Thanks - I am happy to try that also if you can point to a place to get the latest progman.

Rob
__________________

2008 E93 335i, GIAC Stage 2, HPF IC, Injen Intake, Defective AR Design DP's with useless cats
2014 X3 35i JB Stage 1
Appreciate 0
      12-16-2010, 06:42 PM   #519
Amlethae
Private First Class
3
Rep
170
Posts

 
Drives: 2011 335ix M-Sport
Join Date: Oct 2010
Location: Clifton, NJ

iTrader: (0)

Garage List
2011 335xi  [0.00]
Silly question: Without a car (but with a cable) is there any way to check if everything is working correctly XP-wise? Or do I just need to wait for the car (next week!) and see?
Appreciate 0
      12-16-2010, 10:04 PM   #520
xxxjecxxx
Captain
xxxjecxxx's Avatar
66
Rep
809
Posts

 
Drives: Jet Black 06 325i LCI
Join Date: Aug 2009
Location: Orlando, FL

iTrader: (1)

Quote:
Originally Posted by Technic View Post
This is the kind of post that make BMW lawyers send a "cease and desist" letter to forum administrators...
"copy"

you guys keep asking the same question about the alarm VO.. it has been already been answered.
Appreciate 0
      12-16-2010, 10:12 PM   #521
AW128i
Major
AW128i's Avatar
United_States
18
Rep
1,004
Posts

 
Drives: E82 N51
Join Date: Nov 2010
Location: Southeastern, PA

iTrader: (1)

Send a message via AIM to AW128i
Quote:
Originally Posted by xxxjecxxx View Post
"copy"

you guys keep asking the same question about the alarm.. it has been answered almost three times..
In all fairness, this thread is approaching 25 pages and even though I do seem to recall reading about the exact change needed to change the VO to include a factory alarm, I can't seem to recall on which page that information was found. The first post of this thread really needs to be edited to include the specific information found throughout the thread so that people don't repeatedly ask the same questions and/or miss the answers completely.

Searching the thread for "alarm," there are 28 posts returned and it's still not clear if S302A ($302) is the proper option code for the U.S. factory alarm or if it's the one that was used and happened to work.
Appreciate 0
      12-16-2010, 10:22 PM   #522
xxxjecxxx
Captain
xxxjecxxx's Avatar
66
Rep
809
Posts

 
Drives: Jet Black 06 325i LCI
Join Date: Aug 2009
Location: Orlando, FL

iTrader: (1)

Quote:
Originally Posted by AW128i View Post
In all fairness, this thread is approaching 25 pages and even though I do seem to recall reading about the exact change needed to change the VO to include a factory alarm, I can't seem to recall on which page that information was found. The first post of this thread really needs to be edited to include the specific information found throughout the thread so that people don't repeatedly ask the same questions and/or miss the answers completely.

Searching the thread for "alarm," there are 28 posts returned and it's still not clear if S302A ($302) is the proper option code for the U.S. factory alarm or if it's the one that was used and happened to work.
$302 us factory alarm.
Appreciate 0
      12-17-2010, 01:15 AM   #523
turbocomppro
Private First Class
turbocomppro's Avatar
China
5
Rep
179
Posts

 
Drives: Bone Stock 2007 320i
Join Date: Oct 2009
Location: China

iTrader: (0)

I tried to activate the panic mode but I don't know if it works. I have a 3 button remote. I tried to hold the trunk button but all it does is open my trunk... how do you all set your panic alarms off if you have the 3 button FOB?

Last edited by turbocomppro; 12-17-2010 at 01:24 AM.
Appreciate 0
      12-17-2010, 08:50 AM   #524
DESI4life10
Banned
DESI4life10's Avatar
Canada
47
Rep
3,365
Posts

 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

iTrader: (18)

Quote:
Originally Posted by turbocomppro View Post
I tried to activate the panic mode but I don't know if it works. I have a 3 button remote. I tried to hold the trunk button but all it does is open my trunk... how do you all set your panic alarms off if you have the 3 button FOB?
The panic alarm is activated by holding down the trunk release button for 5+ seconds on the keyfob.

Prior to any coding, once you connect all the hardware for the alarm on the car, you will already have the blinking clown nose as well as the panic alarm feature.
Appreciate 0
      12-17-2010, 10:25 AM   #525
xxxjecxxx
Captain
xxxjecxxx's Avatar
66
Rep
809
Posts

 
Drives: Jet Black 06 325i LCI
Join Date: Aug 2009
Location: Orlando, FL

iTrader: (1)

Quote:
Originally Posted by turbocomppro View Post
I tried to activate the panic mode but I don't know if it works. I have a 3 button remote. I tried to hold the trunk button but all it does is open my trunk... how do you all set your panic alarms off if you have the 3 button FOB?
I've tried a few different values, seems you need to have an alarm installed to be able to use this feature as stated above.
Appreciate 0
      12-17-2010, 12:43 PM   #526
Randall41
Private First Class
Randall41's Avatar
Mexico
5
Rep
121
Posts

 
Drives: 2008 BMW 135i Alpine White
Join Date: Apr 2008
Location: DreamLand

iTrader: (1)

coding modules

can any of this be done with Bavarian Technic Scan tools?

The company just says they are working on it (over 2yrs)
Appreciate 0
      12-17-2010, 01:46 PM   #527
xxxjecxxx
Captain
xxxjecxxx's Avatar
66
Rep
809
Posts

 
Drives: Jet Black 06 325i LCI
Join Date: Aug 2009
Location: Orlando, FL

iTrader: (1)

Quote:
Originally Posted by Randall41 View Post
can any of this be done with Bavarian Technic Scan tools?

The company just says they are working on it (over 2yrs)
Other members have suggested that it does not work with it.
Appreciate 0
      12-17-2010, 02:03 PM   #528
xxxjecxxx
Captain
xxxjecxxx's Avatar
66
Rep
809
Posts

 
Drives: Jet Black 06 325i LCI
Join Date: Aug 2009
Location: Orlando, FL

iTrader: (1)

if anyone is willing to donate a 2007+ cable please let me know!
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:50 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST