[BlaSTiWi]

What MY is your car? The error seems to indicate that you may need to update the SP-daten files...

Originally Posted by Michael.R

These are the errors in the error.log in the NCSEXPER\bin directory.

----
ERROR! Modul: CVT_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 106.
Radio_Sdars_Cic

ERROR! Modul: COAPI.CPP, Proc: coapiGetFswPswFromAsw, LineNr: 02, ErrorNr: 1000
COAPI-1000: error
----

No clues. I did have my TCU replaced about a 7 months ago (dealer installed) and I added the iPod adapter in place of the cd changer (I installed) .. not sure if that matters.

[Michael.R]

Originally Posted by BlaSTiWi

What MY is your car? The error seems to indicated that you may need the updated SP-daten ...

It's an 11/05 build MY 2006. Just updated the daten files (I think) and am going to go give it another shot. Hopefully it goes well.

Thanks for the suggestions.

[woodpecka]

Originally Posted by Toshi

Which module did you read out from?

I have compared the entire car, next step will be to identified in which modules the right values are.

[Michael.R]

Originally Posted by Michael.R

It's an 11/05 build MY 2006. Just updated the daten files (I think) and am going to go give it another shot. Hopefully it goes well.

Thanks for the suggestions.

updating the daten files seemed to do the trick. I was able to code the digital speedo, delete warning on nav, mirrors and windows with fob.

Thanks again for the help.

[E90PAT]

Couple questions:

In ncs, after selecting chassis i have CAS NFRM FRM. We always select CAS what are the other two for?

what is the difference between nfrm frm? I want to do the "fog turning on when unlocking car" but when i input values it gives me a coding error. any info? i have an 08 build 07

does anyone know how to make it so that the halos dont dim when the main lamps are on?

[leceur]

I will ask again without the picture's, maybe people didn't see my questions:
-Welcome Lights is now a selectable option:
They still don't work though.... What is the right way of making them come on?

-Added the option of BMW Online, but when I want to accept it says "Telephone not found"? My BlackBerry is connected via BlueTooth hwoever? Am I doing something wrong?

-Added the Voice Module ($620) to my VO, but when I press the Voice button on the wheel nothing happens... any tips?

[sd23]

Originally Posted by JETBLK335i

Hi all, I'm doing this from a blackberry, but can someone please help me with the code to remove this error?

Your adaptive contoller on one light is prob out.
Question when you start the car does your lights move up and down/side to side or both. check to make sure the cover for your xeons have clips and its closing.
To replace the controller its 149 for the part but requires taking the bumper off indy shop did mine for 300 total. but it's something you can do yourself.

[BeWide]

Originally Posted by orangedawg

Any answer/solution to Be-Wide's question above about INPA error? I get the same one.

Still waiting too... What is production date of your car ?

[sd23]

Got my cable, too bad i can't use AE as DRL
WTB DRL AE on my 06 330i...
I was unable to get Eject Key Fob with Engine Off & KOMFORT_EJECT to work on my 06/05 prod date

[JETBLK335i]

Originally Posted by sd23

Your adaptive contoller on one light is prob out.
Question when you start the car does your lights move up and down/side to side or both. check to make sure the cover for your xeons have clips and its closing.
To replace the controller its 149 for the part but requires taking the bumper off indy shop did mine for 300 total. but it's something you can do yourself.

All, im sorry if i am not understanding, but i was probably not clear from the beggining. my car was set up from the factory with AHL on my bi-xenons. I replace them with OEM Euro Non-Adaptive Xenons. These new headlights have no AHL module. But the car is still thinking i have the USA Spec AHL Xenons.

I am clueless when it comes to coding. If someone local can help me out, i can meet them to fix the error. Also, if someone knows how to fix, i can relay this information to my friend at the shop who has the laptop program.

[JETBLK335i]

Originally Posted by Pseudo Nim

Look in the thread earlier on: someone posted the option how to turn off the AHL function on xenons that do not have it.

i searched. couldnt find

[sd23]

Originally Posted by JETBLK335i

All, im sorry if i am not understanding, but i was probably not clear from the beggining. my car was set up from the factory with AHL on my bi-xenons. I replace them with OEM Euro Non-Adaptive Xenons. These new headlights have no AHL module. But the car is still thinking i have the USA Spec AHL Xenons.

I am clueless when it comes to coding. If someone local can help me out, i can meet them to fix the error. Also, if someone knows how to fix, i can relay this information to my friend at the shop who has the laptop program.

If they find the code to turn it off ill help, i am close to greenwich. You can use my cable and software. But we need to find out which code.

Edit scratch that they have a code on the spreadsheet but you have to have NFRM. That means I should be able to do it if your car is newer than 04/07 I think

[outie]

Originally Posted by JETBLK335i

All, im sorry if i am not understanding, but i was probably not clear from the beggining. my car was set up from the factory with AHL on my bi-xenons. I replace them with OEM Euro Non-Adaptive Xenons. These new headlights have no AHL module. But the car is still thinking i have the USA Spec AHL Xenons.

I am clueless when it comes to coding. If someone local can help me out, i can meet them to fix the error. Also, if someone knows how to fix, i can relay this information to my friend at the shop who has the laptop program.

Please post your FRM module .trc. You probably need to turn off the bulb checking for the foglight.

[JETBLK335i]

Originally Posted by outie

Please post your FRM module .trc. You probably need to turn off the bulb checking for the foglight.

post my FRM module .trc.?? :

where do i find?

[sd23]

Originally Posted by JETBLK335i

post my FRM module .trc.?? :

where do i find?

Load FSW PSW MAN profile then go to select cas hit back read esu select FRM module, based on the spreadsheet i think you want the NFRM but i could be wrong. Once you get it read it and it should change the FSW PSW TRC file in your work folder.

[tldoxmf87]

does anyone know how to get rid of the "daytime running lamp/parking lamp" error??
It's probably the angel eyes. I disabled ALL of the cold bulb check and warm bulb check I found in CAS>FRM but still no luck... :[

The spreadsheet only has the code for disabling bulb checks for low beam, high beam, fog light, etc but not the angel eyes...

[brinx38]

anyone knows what error code CDA9 stands for?

It comes back every time i clear error memory. I've still


I think this is what's triggering that "service engine soon" light..

Originally Posted by Pseudo Nim

that should be all you need to do. If I recall correctly, you can focus on individual modules and clear their error memories. When you scan, make sure no errors show up.

If your fuel cap error is STILL on after all that, I would go verify it's on tight (yup, in that order )

[outie]

Originally Posted by tldoxmf87

does anyone know how to get rid of the "daytime running lamp/parking lamp" error??
It's probably the angel eyes. I disabled ALL of the cold bulb check and warm bulb check I found in CAS>FRM but still no luck... :[

The spreadsheet only has the code for disabling bulb checks for low beam, high beam, fog light, etc but not the angel eyes...

You tried these?

Front left AE:

KALTUEBERWACHUNG_SL_LV
aktiv

Right front AE:

KALTUEBERWACHUNG_SL_RV
aktiv

FEHLERMELDUNG_CC_SL_V_L
aktiv
FEHLERMELDUNG_CC_SL_V_R
aktiv

[tldoxmf87]

Originally Posted by outie

You tried these?

Front left AE:

KALTUEBERWACHUNG_SL_LV
aktiv

Right front AE:

KALTUEBERWACHUNG_SL_RV
aktiv

FEHLERMELDUNG_CC_SL_V_L
aktiv
FEHLERMELDUNG_CC_SL_V_R
aktiv

nice! the last two codes I haven't tried.
I'll try them later and report results!
Thanks

[outie]

Originally Posted by tldoxmf87

nice! the last two codes I haven't tried.
I'll try them later and report results!
Thanks

Try this one too (I think it's this one actually):
CC_MEL_SL_BEI_DEF_RL_BL_1

[woodpecka]

Originally Posted by woodpecka

I have installed a set of powered seat with memory on the driver side and I need to activate the key recognition to manage the driver seat memory/position.

I have compared my .TRC file with another one with the premium package and we both have the same parameters, with a few differences.

I need some help to compare these values with your .TRC and tell me how they are setted and which option you have in your car (Powered seat or not...etc) The goal is to identified which value is driver the driver seat memory.

-----------


DOORLOCKING_SEATMEMORY
nicht_aktiv for me, aktiv for the car with premium

ELDRVSEAT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_AUS (Boost de siege automatique) (lumbar?)
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT
nicht_aktiv for me, aktiv for the car with premium

SITZ_AUT_VERST_ENT_T

nicht_aktiv for me, aktiv for the car with premium



GET_POSITION_TIMEOUT
5_minuten (0_minuten without premium)

we both have:
SITZMEMORY_FAHRER
nicht_aktiv (strange!!)

SITZMEMORY_FAHRER_1
nicht_aktiv (strange!!)

AUT_SITZVERSTELLUNG
nicht_aktiv

DEF_AUT_SITZVERSTELLUNG (AJUSTEMENT)
nicht_aktiv





Thanks for any help!

any idea?!

[outie]

Originally Posted by woodpecka

any idea?!

Try adding $459 to VO.