aussie dyno numbers with procede - BMW 3-Series (E90 E92) Forum

xcuzme · 12-06-2010, 02:30 AM

looking for people who have actually dyno'd their cars with a procede v4

please post up your results.

i dyno'd mine stock and it made 183rwkw on a dyno dynamics in 4th gear
dyno'd it again with the afe twin intake box and procede v4 on map 1, it made 215rwkw

interesting thing is it made 215 first run, then 205 after that.
fuel curve was changing on every run.

i think a little bit of that is heatsoak, but also have a feeling my hpfp is on its way out.
after the dyno i got the engine error - reduced power code on the screen and 320i power. turned the car off and on and it went back to normal.

from what ive read, power should be around 230 after the procede so im wondering why mine is down on power

PersianPete · 12-06-2010, 10:48 AM

the engine error code after the run is a bit of a worry. is that what is to be expected after every couple of runs with the procede?

PersianPete · 12-06-2010, 10:49 AM

power is down because you are using Dynodynamics... whack it in on a Dynojet and see the numbers difference.

what matters is the gain... and you've gained 32rwkw or 43rwhp.. which is great!!

xcuzme · 12-06-2010, 07:22 PM

theres a few people on here who have run 230 on a dynodynamics with just tune.

im not interested in the final numbers so much, im interested in knowing the power gain is right.

Jeef Beef · 12-06-2010, 07:41 PM

205 atw seems a bit low, you should definitely be seeing numbers in the 230s.

And yes, having a check engine light after only a few pulls is a big worry...the PROcede should make almost no difference on how long and hard you can go.

xcuzme · 12-07-2010, 01:14 AM

have you dyno'd yours?

definately think my hpfp is on its way out but the error is gone so i cant even take it to get it fixed because they will say nothing is wrong

cent778 · 12-07-2010, 02:02 AM

Would be interested to see results from a Mainline DynoLog.

Apparently you can't fudge number, as they have built in weather stations for correction.

These dyno's are used at all auto saloon shoot outs.

If anyone has experience with these dyno's, could you please post your results.

386whp here (diff tune tho).

xcuzme · 12-07-2010, 03:02 AM

yeah mainline is quite consistent

i use the same dyno for all my power runs, same settings, same position for the inlet temp sensor etc to make sure the readings are consistent

WOPALX · 12-07-2010, 04:35 PM

I'm not big into throwing the car onto the dyno.

In Feb 07 on Procede v1 I ran 234kw on a Dynapack. Car feels much stronger now but cannot be bothered with what the final # is. Also I have more mods (intake, intercooler, exhaust etc) than I did back then.

MFKN3 · 12-14-2010, 12:15 AM

Quote:

Originally Posted by xcuzme

have you dyno'd yours?

definately think my hpfp is on its way out but the error is gone so i cant even take it to get it fixed because they will say nothing is wrong

Was it a fuel pressure related code?

33Five-WA · 01-30-2013, 09:29 PM

Any recommended places in Perth that uses Mainline Dyno?

skycat · 01-30-2013, 11:15 PM

This thread will be good

Come to the dyno day and have a play, compare with others this is the only way.

pavo335 · 01-30-2013, 11:41 PM

haven't seen old man woplax for a while, wonder what he did after selling mthis?

bornadog335i · 01-31-2013, 06:47 AM

Quote:

Originally Posted by skycat

This thread will be good

Come to the dyno day and have a play, compare with others this is the only way.

Need one in Melbourne

33Five-WA · 01-31-2013, 07:25 AM

Quote:

Originally Posted by skycat

This thread will be good

Come to the dyno day and have a play, compare with others this is the only way.

Would love to but it's a bit of a drive to where you are... =P

WOPALX · 02-03-2013, 09:50 PM

Quote:

Originally Posted by pavo335

haven't seen old man woplax for a while, wonder what he did after selling mthis?

I had a laugh when a letter from the Vic Police impound unit arrived letting me know my old car had been impounded day after it was picked up by the new owner

Ride wise my Mrs is off the road for 12mths, so I've gone domestic with a 6.0L V8, not nearly as luxurious as the BM but sh*t loads of fun, manual box, plus I dont give a toss if some wanker scratches the bumper bar in the train station car park

, or the kids drop drinks / food inside the car ...... well not as much anyway.

Still keen to get an e36m3 and supercharge it at some stage, but wife/kids/yachting etc mean no spare time

pavo335 · 02-03-2013, 10:00 PM

Quote:

Originally Posted by WOPALX

I had a laugh when a letter from the Vic Police impound unit arrived letting me know my old car had been impounded day after it was picked up by the new owner

Ride wise my Mrs is off the road for 12mths, so I've gone domestic with a 6.0L V8, not nearly as luxurious as the BM but sh*t loads of fun, manual box, plus I dont give a toss if some wanker scratches the bumper bar in the train station car park

, or the kids drop drinks / food inside the car ...... well not as much anyway.

Still keen to get an e36m3 and supercharge it at some stage, but wife/kids/yachting etc mean no spare time

Good to hear all is well old man, those coils are still pulling strong

12-06-2010, 02:30 AM	#1
xcuzme Private First Class Drives: E90 335i Join Date: Jun 2010 Location: Sydney, Australia Posts: 104 iTrader: (0)	aussie dyno numbers with procede looking for people who have actually dyno'd their cars with a procede v4 please post up your results. i dyno'd mine stock and it made 183rwkw on a dyno dynamics in 4th gear dyno'd it again with the afe twin intake box and procede v4 on map 1, it made 215rwkw interesting thing is it made 215 first run, then 205 after that. fuel curve was changing on every run. i think a little bit of that is heatsoak, but also have a feeling my hpfp is on its way out. after the dyno i got the engine error - reduced power code on the screen and 320i power. turned the car off and on and it went back to normal. from what ive read, power should be around 230 after the procede so im wondering why mine is down on power
	Tweet

12-06-2010, 10:48 AM	#2
PersianPete formerly 'perth335i' Drives: E92 335i Join Date: Jul 2010 Location: Perth City Posts: 737 iTrader: (0) Garage List 2007 335i Coupe [5.00]	the engine error code after the run is a bit of a worry. is that what is to be expected after every couple of runs with the procede? __________________ 335i E92 - Injen DCI - VMR V701 - Eibach Pro Kit - Matte Black Grille - Shadow Line Trim - <insert tuner here> Boys don't grow up - the toys just get more expensive...

12-06-2010, 10:49 AM	#3
PersianPete formerly 'perth335i' Drives: E92 335i Join Date: Jul 2010 Location: Perth City Posts: 737 iTrader: (0) Garage List 2007 335i Coupe [5.00]	power is down because you are using Dynodynamics... whack it in on a Dynojet and see the numbers difference. what matters is the gain... and you've gained 32rwkw or 43rwhp.. which is great!! __________________ 335i E92 - Injen DCI - VMR V701 - Eibach Pro Kit - Matte Black Grille - Shadow Line Trim - <insert tuner here> Boys don't grow up - the toys just get more expensive...

12-06-2010, 07:41 PM	#5
Jeef Beef Lord Captain Commander Drives: a sleeper Join Date: Oct 2009 Location: Sydney, Australia Posts: 3,023 iTrader: (0)	205 atw seems a bit low, you should definitely be seeing numbers in the 230s. And yes, having a check engine light after only a few pulls is a big worry...the PROcede should make almost no difference on how long and hard you can go. __________________ E82 135i M-sport: SGM/6MT/Black PROcede V5 \| BMS DCI \| AR Catless DPs \| BMW PE \| ER CP \| HKS BOV \| BMW SSK \| KW V1 coilovers \| Dunlop Direzza Star Specs \| GTC-CX Matte Black 18" \| GP Thunder 7500K \| Kerscher CF Lip

12-07-2010, 04:35 PM	#9
WOPALX Lieutenant Colonel Drives: 335i Sedan Join Date: May 2007 Location: Sydney, Australia Posts: 1,992 iTrader: (2)	I'm not big into throwing the car onto the dyno. In Feb 07 on Procede v1 I ran 234kw on a Dynapack. Car feels much stronger now but cannot be bothered with what the final # is. Also I have more mods (intake, intercooler, exhaust etc) than I did back then. __________________ Vishnu PROcede V5 \| VK Motorworks FMIC \| AR Design OCC \| Forge DV's \| Bilstein PSS9 \| M3 Lower Control Arms & Caster Rods \| Quaife LSD \| HiTech Exhaust \| BMW Performance Illuminated Door Sills \| BMW Performance Gear Selector & Boot \| BMW Performance E-Brake Cover

12-06-2010, 07:22 PM	#4
xcuzme Private First Class Drives: E90 335i Join Date: Jun 2010 Location: Sydney, Australia Posts: 104 iTrader: (0)	theres a few people on here who have run 230 on a dynodynamics with just tune. im not interested in the final numbers so much, im interested in knowing the power gain is right.

12-07-2010, 01:14 AM	#6
xcuzme Private First Class Drives: E90 335i Join Date: Jun 2010 Location: Sydney, Australia Posts: 104 iTrader: (0)	have you dyno'd yours? definately think my hpfp is on its way out but the error is gone so i cant even take it to get it fixed because they will say nothing is wrong

12-07-2010, 02:02 AM	#7
cent778 Private Drives: e92 335 Join Date: Apr 2009 Location: Perth Posts: 82 iTrader: (0)	Would be interested to see results from a Mainline DynoLog. Apparently you can't fudge number, as they have built in weather stations for correction. These dyno's are used at all auto saloon shoot outs. If anyone has experience with these dyno's, could you please post your results. 386whp here (diff tune tho).

12-07-2010, 03:02 AM	#8
xcuzme Private First Class Drives: E90 335i Join Date: Jun 2010 Location: Sydney, Australia Posts: 104 iTrader: (0)	yeah mainline is quite consistent i use the same dyno for all my power runs, same settings, same position for the inlet temp sensor etc to make sure the readings are consistent

01-30-2013, 09:29 PM	#11
33Five-WA Private Drives: MY09 335i Coupe DCT M-Sport Join Date: Nov 2012 Location: Perth, W. Australia Posts: 69 iTrader: (0)	Any recommended places in Perth that uses Mainline Dyno?

01-30-2013, 11:15 PM	#12
skycat BimmerPost Supporting Vendor Drives: 335 coupe ADVAN Join Date: May 2011 Location: Sydney Posts: 946 iTrader: (0)	This thread will be good Come to the dyno day and have a play, compare with others this is the only way. Last edited by skycat; 01-30-2013 at 11:41 PM.

01-30-2013, 11:41 PM	#13
pavo335 Banned Drives: 3.5 wheeler Join Date: Feb 2012 Location: sydney Posts: 2,991 iTrader: (0)	haven't seen old man woplax for a while, wonder what he did after selling mthis?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search