Official Alberta Members Thread (#2) - Page 35 - BMW 3-Series (E90 E92) Forum

bigup · 10-11-2011, 09:52 AM

Quote:

Originally Posted by Black3352009

Hey everyone. New here

What kind of gains are you seeing with the meth

I have stage 2 dinan tune currently. Just got car 2 months ago and starting to look into mods

Put it this way, I don't recall a time I giggled like a little girl, except for the first time I drove my car with meth

I have not dyno'd my car yet, but identical cars to mine (JB4+DCI+Meth) are producing around 400 hp to the wheels, and around 430 wtq (on a Dynojet).

The only negative; I have a hunch it's blowing my cats to pieces!

Welcome to the board, btw..

Black3352009 · 10-11-2011, 11:27 AM

Cool I've ran meth in previous car with similar experience

E90MCF · 10-11-2011, 11:38 AM

Quote:

Originally Posted by bigup

Put it this way, I don't recall a time I giggled like a little girl, except for the first time I drove my car with meth

LOL. . . I do not need to say anything. . .

morphius909 · 10-13-2011, 07:44 PM

Quote:

Originally Posted by 2HIGH~PSI

GarageWorks. Ask for Avery or David.

Say TJ sent you. They did my 335

my dads Benz, and my supra. They have also done a few of my friends Gallardos, and most of the exotics in edmonton

Hey TJ,

Thanks for the referall. Got TINT (35% All around) and 3M Put on today.

Looks Fantastic!

Will post pics once I clay, polish and wax this weekend!

grahamn214 · 10-14-2011, 01:18 PM

Quote:

Originally Posted by Spoolin335

Here is a pretty recent list of our Alberta members, feel free to post up and ill try to add you onto the list!

1. dibbz - Edmonton
2. bbog2008 - Edmonton
3. NYR - Calgary
4. CPI - Calgary
5. Spoolin335 - Edmonton
6. scooby9 - Edmonton
7. e90sim - Calgary
8. Orientexpress - Edmonton
9. E9T2 - Hinton
10. r.c.y.k. - Edmonton
11. hubble bubble - Calgary
12. E93Ray - Edmonton
13. Drakos - Calgary
14. sc88 - Edmonton
15. ngonc51 - Calgary
16. uncle_ben - Edmonton
17. gstuart - Calgary
18. bob.oz.best - Calgary
19. midnite - Calgary
20. dirtmaster666 - Edmonton
21. s2catzo335 - Edmonton
22. rje - Calgary
23. Inzane - Edmonton
24. sunman - Edmonton
25. deadlyrhythm - Edmonton
26. Wolverine23 - Edmonton
27. Shomar 330 - Edmonton
28. dark169 - Calgary
29. CalgaryX3 - Calgary
30. Brandin335 - Edmonton
31. huebert_jdn - Edmonton
32. Garth - St. Albert
33. Dr. Anthony - Edmonton
34. mattyguns5 - Calgary
35. bigup - Calgary
36. Ironring Racing - Calgary
37. BMRLVR - Fort MacMurray
38. dark169 - Calgary
39. xbaie90 - Calgary
40. Dmitryz8 - Calgary
41. adikoni - Calgary
42. Rob.K - Edmonton
43. e85sbm - Calgary
44. 2HIGH~PSI - Edmonton
45. mad villain - Calgary
46. acs-e36 - Calgary
47. E92LNGCGY - Calgary
48. joech - Calgary
49. Reggie@MWDesign - Calgary SW
50. Doomageddon - Edmonton
51. Sorath - Calgary
52. justin_bmw - Calgary
53. m3cragg - Calgary
54. Paredster - Edmonton
55. Miguex - Calgary
56. Samjai187 - Calgary
57. bucktown - Edmonton
58. Airboy - Calgary
59. YYC_E92 - Calgary
60. Bruthah -
61. mike3_ - Edmonton
62. ray_futbol - Edmonton
63. Perostahov - Edmonton
64. Jehad - Edmonton
65. CalgaryX3 - Calgary
66. AspenWhite335 - Calgary
67. dosun - Calgary
68. DMOS - Edmonton
69. YYC_E92 - Calgary
70. HowFast - Medicine Hat
71. farangdude - Edmonton
72. E90Vader - Calgary
73. Willy Beamin - Edmonton
74. ttt1595 - Calgary

75. grahamn214 - Edmonton

morphius909 · 10-14-2011, 07:02 PM

Quote:

Originally Posted by grahamn214

75. grahamn214 - Edmonton

morphius909-Edmonton

cgy-jim · 10-14-2011, 07:04 PM

Quote:

Originally Posted by morphius909

morphius909-Edmonton

Pleas add:

cgy-jim - Calgary

albertabahn · 10-15-2011, 05:20 PM

Hi everyone. Say has anyone installed the front splitters on a non M package, non aero 335i E90 LCI? The carbon fiber type from the BMW accessaries catalog.

I'm thinking about having them installed at delivery. Nov, 2011.

e85sbm · 10-15-2011, 10:28 PM

Why are you waiting until November for delivery? Are you buying a Special edition 335xi? Or was your car a factory order?

maakaveli · 10-19-2011, 02:41 AM

Quote:

Originally Posted by morphius909

morphius909-Edmonton

77. maakaveli - edmonton

taxbuster · 10-22-2011, 09:10 AM

Quote:

Originally Posted by maakaveli

77. maakaveli - edmonton

taxbuster - calgary

taxbuster · 10-22-2011, 09:15 AM

While I'm here might as well ask -- winters. I've gotta replace mine. '09 335i xdrive (and possibly soon - like today - an '11 335 i xdrive SE).

I've heard about the Hakka 9s - comments seem to be they are fantastic in snow and lousy on dry pavement. Too soft to corner well.

Does anyone have experience with 'em around here - or any better recommendation for Calgary-style winters. Note: I also drive a lot between here and the Okanagan.

Edit: crap - I see there's a thread on this in the forum already. Over to there.

couturegirl · 10-27-2011, 07:41 AM

79. Givemecouture - Calgary

E90MCF · 10-28-2011, 08:05 PM

Tony's(ttt1595) new 19" Matte Black M3 GTS Replicas =)

cgy-jim · 10-31-2011, 10:16 PM

Any one know of a good place in Calgary to get 3m or equal protection? I'd like to get this done but the dealership is saying nov 17! I've got the basic package but wanted to do a little more around the wheel wells.

hutong · 11-03-2011, 12:49 PM

+1 for Edmonton.

My 335i is out of break-in period and will be equipped with winter tires today.

joelh86 · 11-04-2011, 02:08 PM

So I've been in Calgary for 2 months now.. Since it just snowed today, I would like to ask a few questions... Where do you get undercoat done? what type? is it important to get it done here? also how much does it cost?

albertabahn · 11-04-2011, 11:10 PM

Hi again. No I did not order an xdrive. I had to factory order to get a RWD 6MT.

e85sbm · 11-06-2011, 06:01 PM

Quote:

Originally Posted by joelh86

So I've been in Calgary for 2 months now.. Since it just snowed today, I would like to ask a few questions... Where do you get undercoat done? what type? is it important to get it done here? also how much does it cost?

Undercoat is not necessary in Calgary. Of course it is recommended for longevity of parts, but in no-way will your car be totally rusted in a couple of years. We use a higher level of gravel and not as much salt as many other markets.

Quote:

Originally Posted by albertabahn

Hi again. No I did not order an xdrive. I had to factory order to get a RWD 6MT.

I am glad to hear you are buying a RWD manual. Do you mind me asking where you bought your car? Also, will you be buying winter tires for it?

albertabahn · 11-07-2011, 10:40 AM

No problem. I ordered through Edmonton BMW. ANd yes I guess ill have to install a winter tire, wheel package. I do not plan on using it as a daly driver in the winter but just in case.

joech · 11-08-2011, 11:03 AM

Quote:

Originally Posted by cgy-jim

Any one know of a good place in Calgary to get 3m or equal protection? I'd like to get this done but the dealership is saying nov 17! I've got the basic package but wanted to do a little more around the wheel wells.

I had my wife MDX and my X6 done at Refine Automotive salon they did a great jobs. Price is good considering the entire hoods are protected by 3M.

Kavs328 · 11-09-2011, 09:01 PM

New member! Kavs328 - Fort McMurray

10-15-2011, 05:20 PM	#756
albertabahn Enlisted Member Drives: Drives Nov. delivery 335i 6mt Join Date: Sep 2011 Location: Alberta Posts: 40 iTrader: (0) Garage List 2011 BMW 335i Sedan [0.00]	OEM carbon fiber Hi everyone. Say has anyone installed the front splitters on a non M package, non aero 335i E90 LCI? The carbon fiber type from the BMW accessaries catalog. I'm thinking about having them installed at delivery. Nov, 2011.

10-15-2011, 10:28 PM	#757
e85sbm Snow Wizard Drives: '11 Z4 35iS; '12 MINI JCW Join Date: Jan 2009 Location: Calgary, Canada Posts: 335 iTrader: (2)	Why are you waiting until November for delivery? Are you buying a Special edition 335xi? Or was your car a factory order? __________________ '11 BMW Z4 35iS '12 Mini JCW

10-22-2011, 09:15 AM	#760
taxbuster Private Drives: 2011 335i xdrive SE Join Date: Oct 2011 Location: Calgary, AB Posts: 73 iTrader: (0)	While I'm here might as well ask -- winters. I've gotta replace mine. '09 335i xdrive (and possibly soon - like today - an '11 335 i xdrive SE). I've heard about the Hakka 9s - comments seem to be they are fantastic in snow and lousy on dry pavement. Too soft to corner well. Does anyone have experience with 'em around here - or any better recommendation for Calgary-style winters. Note: I also drive a lot between here and the Okanagan. Edit: crap - I see there's a thread on this in the forum already. Over to there. Last edited by taxbuster; 10-22-2011 at 09:29 AM. Reason: Dumbass missed the existing thread!

10-28-2011, 08:05 PM	#762
E90MCF Lieutenant Colonel Drives: 06' AW E90 Join Date: Apr 2011 Location: YYC Posts: 1,526 iTrader: (1)	Tony's(ttt1595) new 19" Matte Black M3 GTS Replicas =) __________________

10-31-2011, 10:16 PM	#763
cgy-jim Private Drives: 2011 335Xi, Special Edition Join Date: Jul 2011 Location: Calgary Posts: 97 iTrader: (0)	Protection Any one know of a good place in Calgary to get 3m or equal protection? I'd like to get this done but the dealership is saying nov 17! I've got the basic package but wanted to do a little more around the wheel wells.

10-11-2011, 11:27 AM	#750
Black3352009 New Member Drives: 2009 335 Join Date: Oct 2011 Location: Calgary Posts: 6 iTrader: (0)	Cool I've ran meth in previous car with similar experience

10-27-2011, 07:41 AM	#761
couturegirl Who got the keys to my bimma Drives: 335i Join Date: Jun 2011 Location: Canada Posts: 59 iTrader: (0)	79. Givemecouture - Calgary

11-03-2011, 12:49 PM	#764
hutong New Member Drives: 2011 335i x-drive Join Date: Nov 2011 Location: Edmonton Posts: 8 iTrader: (0)	Hi all +1 for Edmonton. My 335i is out of break-in period and will be equipped with winter tires today.

11-04-2011, 02:08 PM	#765
joelh86 Enlisted Member Drives: BMW e92 328i Join Date: Sep 2009 Location: vancouver Posts: 30 iTrader: (3)	So I've been in Calgary for 2 months now.. Since it just snowed today, I would like to ask a few questions... Where do you get undercoat done? what type? is it important to get it done here? also how much does it cost?

11-04-2011, 11:10 PM	#766
albertabahn Enlisted Member Drives: Drives Nov. delivery 335i 6mt Join Date: Sep 2011 Location: Alberta Posts: 40 iTrader: (0) Garage List 2011 BMW 335i Sedan [0.00]	Hi again. No I did not order an xdrive. I had to factory order to get a RWD 6MT.

11-07-2011, 10:40 AM	#768
albertabahn Enlisted Member Drives: Drives Nov. delivery 335i 6mt Join Date: Sep 2011 Location: Alberta Posts: 40 iTrader: (0) Garage List 2011 BMW 335i Sedan [0.00]	No problem. I ordered through Edmonton BMW. ANd yes I guess ill have to install a winter tire, wheel package. I do not plan on using it as a daly driver in the winter but just in case.

11-09-2011, 09:01 PM	#770
Kavs328 Registered Drives: 2011 BMW 328i xDrive Join Date: Nov 2011 Location: Fort McMurray Posts: 1 iTrader: (0)	New member! Kavs328 - Fort McMurray

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search