[jazze90]

Wow, great gains, is this on E85? How much boost?

[cloud_connected]

Originally Posted by jazze90

Wow, great gains, is this on E85? How much boost?

No e85, just a 50/50 meth mix. 18psi tapering to 13.5psi with 10 degrees of timing in the mids climbing to 14.5 at redline. There are no timing corrections(my cyl1 is noisy and corrects occasionally but not a big deal) and there is definitely room up top to pick up power but I like it as is for a DD. When it cools down some I might go for a "balls to the walls" tune just for a glory run.

[nt_loader]

Originally Posted by cloud_connected

Hey guys, I have some ATR dyno numbers to share. The car base lined at 280rwhp/300rwtq and made 404rwhp/460rwtq using my ATR map. 125whp/160wtq delta is pretty good. There is still some room up top in the map to pick up some HP.

Whats an ATR map, and what other mods do you have on your car?

[cloud_connected]

Originally Posted by nt_loader

Whats an ATR map, and what other mods do you have on your car?

ATR is the Cobb user tuning software. It was a custom map I made. I'm FBO+meth.

[nitehawk]

Originally Posted by cloud_connected

ATR is the Cobb user tuning software. It was a custom map I made. I'm FBO+meth.

Who is this capable guy that just appeared out of the blue
Nice numbers...is that a Dynojet?
Dzenno and I are planning to hit the dyno this weekend to see what kinda numbers we can achieve with his map on FBO 94 pump gas

[VNeBLOB42]

Originally Posted by cloud_connected

Hey guys, I have some ATR dyno numbers to share. The car base lined at 280rwhp/300rwtq and made 404rwhp/460rwtq using my ATR map. 125whp/160wtq delta is pretty good. There is still some room up top in the map to pick up some HP.

was your baseline completely stock? 280rwhp seems to be little loss. What Dyno did you use?

my baseline on a Dyno Dynamics was 230wrhp.

Nice delta!

[benzy89]

Originally Posted by ihc95

Ok thanks. Do you recommend a dry or oiled air filter?

Just buy the K&N filter -- It'll need to get oil every ~20k

[cloud_connected]

Originally Posted by VNeBLOB42

was your baseline completely stock? 280rwhp seems to be little loss. What Dyno did you use?

my baseline on a Dyno Dynamics was 230wrhp.

Nice delta!

Yes, that was stock W/O bolt ons

[ChuckD05]

what are you using for meth control cloud?

[cloud_connected]

Originally Posted by ChuckD05

what are you using for meth control cloud?

Aquamist HFS-3

[type rrr]

Originally Posted by nitehawk

Who is this capable guy that just appeared out of the blue
Nice numbers...is that a Dynojet?
Dzenno and I are planning to hit the dyno this weekend to see what kinda numbers we can achieve with his map on FBO 94 pump gas

this will be interesting, can't wait for the result

[jazze90]

Originally Posted by nitehawk

Who is this capable guy that just appeared out of the blue
Nice numbers...is that a Dynojet?
Dzenno and I are planning to hit the dyno this weekend to see what kinda numbers we can achieve with his map on FBO 94 pump gas

Can't wait to see what you guys pull off with Dzenno's pro tune...he really knows his N54

[cloud_connected]

Originally Posted by nitehawk

Who is this capable guy that just appeared out of the blue
Nice numbers...is that a Dynojet?
Dzenno and I are planning to hit the dyno this weekend to see what kinda numbers we can achieve with his map on FBO 94 pump gas

Sorry, I must this until just now.

No, it is a dynocom dyno. They read lower than a dynojet but higher than a mustang. It has a feature to "calculate" dynojet numbers and it said 420/475 in dynojet mode. But that's just a calculation lol

[MTR]

Does this boost and A/F log look normal? The timing curves were all clean. Sorry I didn't get to 7000 RPMs, I ran out of real estate. What does boost normally drop to at Redline?

Also is "Charge Air Temp (F)" the temperature at the throttle body (after the intercooler)?

[cloud_connected]

Originally Posted by MTR

Does this boost and A/F log look normal? The timing curves were all clean. Sorry I didn't get to 7000 RPMs, I ran out of real estate. What does boost normally drop to at Redline?

Also is "Charge Air Temp (F)" the temperature at the throttle body (after the intercooler)?

AFRs and boost look good. Boost normally tapers to around 10psi-12psi.

Charge Air Temp is measured post FMIC at the TMAP sensor.

[couwam]

Hi guys,

I am currently on stage 2+ agressive. Last night I recorded several boost levels exceeding 20PSI on my AP(live log). Is this normal?

[enrita]

Originally Posted by couwam

Hi guys,

I am currently on stage 2+ agressive. Last night I recorded several boost levels exceeding 20PSI on my AP(live log). Is this normal?

boost spikes probably related to shift. post a log.

[Jake@PTF]

Originally Posted by couwam

Hi guys,

I am currently on stage 2+ agressive. Last night I recorded several boost levels exceeding 20PSI on my AP(live log). Is this normal?

Where in MD are you located. We come out to events and meets with the locals. If you want to swing by I can take a look at your car and see how things are running for you.

If you want email me at jhershorin@protuningfreaks.com and I can link you into the DC Metro BMW group.

[SalemChiro]

Originally Posted by Jake@PTF

Where in MD are you located. We come out to events and meets with the locals. If you want to swing by I can take a look at your car and see how things are running for you.

If you want email me at jhershorin@protuningfreaks.com and I can link you into the DC Metro BMW group.

^ That's a sweet offer....ever heading to Boston!

[VNeBLOB42]

Originally Posted by SalemChiro

^ That's a sweet offer....ever heading to Boston!

+2. What about Sacramento, Ca.

[Jake@PTF]

Wrong thread I am always happy to fly out or drive somewhere for a tuning weekend. Just have to have enough interest so its worth everyones time.

[MTR]

After looking at some logs I was wondering if there was an IAT threshold where the motor will begin to pull timing because the air charge is too hot? I'm sure it's just one factor of many but just a rough value like anything over 140 F is bad, etc.

Thanks