E90 Rear diffuser for Non Mtech/ M3 Bumpers - BMW 3-Series (E90 E92) Forum

klove83 · 02-24-2011, 08:27 PM

I have brought this idea up to a few venders already and I would like to put this out there for others to comment also. I dont want to go through the hassle of buying and painting a bumper... There expensive and I just want to not spend as much on my daily car but still make it stand out on the road. So Im sure we will get some venders wanting to make this happen. So lets make a list of people that would be interested in this.

I would also like to have ideas thrown out for the style of rear diffuser. I will also be working on photo shops and Ideas.

BoostedE90 · 02-24-2011, 08:31 PM

Count me in! I would suggest talking to Gavin@MMW but it looks like you already ran the idea past him. Unfortunately he's busy working on the lip for the e90's.

AoS810 · 02-24-2011, 09:56 PM

Nice, got a thread goin heh. I'd be down too.

posite · 02-24-2011, 10:39 PM

I'd be interested.

dirte90 · 02-24-2011, 11:09 PM

+1

Chard · 02-25-2011, 04:46 PM

the lower half of our bumpers aren't separable though. It's 1 piece. We'd have to cut?

klove83 · 02-25-2011, 05:14 PM

Quote:

Originally Posted by Chard

the lower half of our bumpers aren't separable though. It's 1 piece. We'd have to cut?

No cutting this piece will fit over the bumper. So it will probably have mounting screws underneath and use double sided tape around the outside like the splitters. This is if it's like the bottom 2 pics I posted. If it's a full lip like the first pic then the exhaust would have to be brought down since the rear lip will sit lower.

AoS810 · 02-25-2011, 05:43 PM

I'm not diggin the idea of having to lower the exhaust like in the 1st pic.. something with the bumper screws and 3M tape would be a better option, for me at least.

trekker · 02-25-2011, 08:48 PM

Count me in please..

cssnms · 02-25-2011, 10:03 PM

Quote:

Originally Posted by BoostedE90

Count me in! I would suggest talking to Gavin@MMW but it looks like you already ran the idea past him. Unfortunately he's busy working on the lip for the e90's.

What lip? Do tell! Hopefully it's a lip for the e90 LCI non m tech front bumper!

cssnms · 02-25-2011, 10:03 PM

Oh and I am interested if it looks good.

AoS810 · 02-25-2011, 10:10 PM

sorry cssnms, the lip is for stock pre-lci front bumper. the thread for the lip is in the sponsored area.

CobraMarty · 02-26-2011, 08:37 AM

I like the picture on the red car. How about one for the E92 rear bumper? I would buy that.

CobraMarty · 02-26-2011, 08:40 AM

How about a CF sheet cut out like the red photo that you apply to your stock bumper. No painting, tape, screws and can be removed at the end of your lease.

klove83 · 02-26-2011, 05:46 PM

Quote:

Originally Posted by CobraMarty

How about a CF sheet cut out like the red photo that you apply to your stock bumper. No painting, tape, screws and can be removed at the end of your lease.

Ive thought of that but the bottom bumper is to curvy for it to lay right. It would be a task to line it all up and make it straight. Also If someone wants dual quads like myself I can just cut my bumper and then lay the diffuser over and then I can have duals on each side.

overkill1125 · 02-28-2011, 12:21 AM

I like the last picture option if its as easy to install like front splitters. Pm me if ever its available for the pre-lci.

Thanks

uweric5985 · 02-28-2011, 06:09 AM

Please count me in and have it ship internationally ;-)

Temonio · 02-28-2011, 08:14 PM

I'm listening.

ZweiTurbos · 02-28-2011, 09:15 PM

Definitely interested!

klove83 · 03-01-2011, 09:43 PM

...bump...

shim! · 03-01-2011, 10:28 PM

Definitely interested. Try bringing this up to Gavin once the front lip is done!

irq5 · 03-02-2011, 06:20 AM

Hey All

I'm currently working on a diffuser for the 335 m-tech rear - I'm really keen in developing something that will fit the stock rear though based on the interest shown here. I'm going to find a development mule in my area and see what I can do to get something out quite quickly (quickly being relative - it will take around 6 months)

I'd have to look at making a few options available:
335 vs. non 335

335: Dual / Quad openings

non 335: Similar story - opening on the left or both?

Give me some ideas / comments and I'll see how quickly I can get started on this.

02-24-2011, 08:27 PM	#1
klove83 Lieutenant Drives: Red E90, Red E36 M3 Join Date: Dec 2010 Location: Colorado Springs, CO Posts: 431 iTrader: (1) Garage List 2006 BMW 325I [5.00] 1995 BMW M3 [0.00] 1968 Dodge Charger R/T [5.00]	E90 Rear diffuser for Non Mtech/ M3 Bumpers I have brought this idea up to a few venders already and I would like to put this out there for others to comment also. I dont want to go through the hassle of buying and painting a bumper... There expensive and I just want to not spend as much on my daily car but still make it stand out on the road. So Im sure we will get some venders wanting to make this happen. So lets make a list of people that would be interested in this. I would also like to have ideas thrown out for the style of rear diffuser. I will also be working on photo shops and Ideas. __________________ Last edited by klove83; 02-24-2011 at 08:51 PM.
	Tweet

02-26-2011, 08:37 AM	#13
CobraMarty Lieutenant Drives: 2007 328xi Coupe Join Date: Sep 2010 Location: PA Posts: 488 iTrader: (5)	I like the picture on the red car. How about one for the E92 rear bumper? I would buy that. __________________ 2007 328xi E92 Coupe // 6 MT-Crimson Red, Black Interior, Brushed Silver Trim//Sport Seats//BMW Perf. SW Alcantara//CF Roof, Front Lip, Trunk Lip Spoilers//18" 197, F-5mm, R-15mm Spacers//Akebono Euro Ceramic Pads//MGP Red Caliper Covers//BMW Alarm System//BMW CF Perf. Strut Brace//LUX H8 v3.0 AE//6k HID Fogs//BMW PE//Macht Schnell Intake Scoops//BMW EURO Intake//AA Tune//188AWHP-->196AWHP-->216AWHP//SOON- 3 Stage Intake Manifold!

02-26-2011, 08:40 AM	#14
CobraMarty Lieutenant Drives: 2007 328xi Coupe Join Date: Sep 2010 Location: PA Posts: 488 iTrader: (5)	How about a CF sheet cut out like the red photo that you apply to your stock bumper. No painting, tape, screws and can be removed at the end of your lease. __________________ 2007 328xi E92 Coupe // 6 MT-Crimson Red, Black Interior, Brushed Silver Trim//Sport Seats//BMW Perf. SW Alcantara//CF Roof, Front Lip, Trunk Lip Spoilers//18" 197, F-5mm, R-15mm Spacers//Akebono Euro Ceramic Pads//MGP Red Caliper Covers//BMW Alarm System//BMW CF Perf. Strut Brace//LUX H8 v3.0 AE//6k HID Fogs//BMW PE//Macht Schnell Intake Scoops//BMW EURO Intake//AA Tune//188AWHP-->196AWHP-->216AWHP//SOON- 3 Stage Intake Manifold!

03-01-2011, 09:43 PM	#20
klove83 Lieutenant Drives: Red E90, Red E36 M3 Join Date: Dec 2010 Location: Colorado Springs, CO Posts: 431 iTrader: (1) Garage List 2006 BMW 325I [5.00] 1995 BMW M3 [0.00] 1968 Dodge Charger R/T [5.00]	...bump... __________________

03-01-2011, 10:28 PM	#21
shim! Major General Drives: '08 e90 Join Date: Sep 2010 Location: 718 Posts: 5,962 iTrader: (5)	Definitely interested. Try bringing this up to Gavin once the front lip is done! __________________ alpinewhite&terra + not as much wheelgap

02-24-2011, 08:31 PM	#2
BoostedE90 Major Drives: e90 335i 6MT Join Date: Nov 2007 Location: Tampa/Gainesville, FL Posts: 1,429 iTrader: (5)	Count me in! I would suggest talking to Gavin@MMW but it looks like you already ran the idea past him. Unfortunately he's busy working on the lip for the e90's.

02-24-2011, 09:56 PM	#3
AoS810 Second Lieutenant Drives: 2008 E90 AW 328i Join Date: Oct 2009 Location: Glendora, CA Posts: 257 iTrader: (3)	Nice, got a thread goin heh. I'd be down too.

02-24-2011, 10:39 PM	#4
posite Private First Class Drives: 09 335i e90 jet black Join Date: Jan 2011 Location: lubbock, tx Posts: 147 iTrader: (1)	I'd be interested.

02-24-2011, 11:09 PM	#5
dirte90 Second Lieutenant Drives: E90 328i Join Date: Sep 2010 Location: SoCal Posts: 259 iTrader: (2)	+1

02-25-2011, 04:46 PM	#6
Chard Second Lieutenant Drives: E90 335i, E46 M3 Join Date: Mar 2010 Location: Honolulu Posts: 228 iTrader: (3)	the lower half of our bumpers aren't separable though. It's 1 piece. We'd have to cut?

02-25-2011, 05:43 PM	#8
AoS810 Second Lieutenant Drives: 2008 E90 AW 328i Join Date: Oct 2009 Location: Glendora, CA Posts: 257 iTrader: (3)	I'm not diggin the idea of having to lower the exhaust like in the 1st pic.. something with the bumper screws and 3M tape would be a better option, for me at least.

02-25-2011, 08:48 PM	#9
trekker Private First Class Drives: e90LCI Join Date: Jun 2010 Location: HONG KONG Posts: 117 iTrader: (0)	Count me in please..

02-25-2011, 10:03 PM	#11
cssnms Brigadier General Drives: 2011 BMW 335d Join Date: Sep 2010 Location: Murland Posts: 3,091 iTrader: (4)	Oh and I am interested if it looks good.

02-25-2011, 10:10 PM	#12
AoS810 Second Lieutenant Drives: 2008 E90 AW 328i Join Date: Oct 2009 Location: Glendora, CA Posts: 257 iTrader: (3)	sorry cssnms, the lip is for stock pre-lci front bumper. the thread for the lip is in the sponsored area.

02-28-2011, 12:21 AM	#16
overkill1125 Lieutenant Drives: 2013 328i xdrive Join Date: Jan 2010 Location: Montreal, Canada Posts: 530 iTrader: (4)	I like the last picture option if its as easy to install like front splitters. Pm me if ever its available for the pre-lci. Thanks

02-28-2011, 06:09 AM	#17
uweric5985 Private First Class Drives: BMW E90 LCI 323i Join Date: Feb 2010 Location: Macau, China Posts: 135 iTrader: (1) Garage List 2009 BMW 323i [4.75]	Please count me in and have it ship internationally ;-)

02-28-2011, 08:14 PM	#18
Temonio Private Drives: 09 328i Join Date: Jan 2010 Location: Knoxville, TN Posts: 90 iTrader: (1) Garage List 2009 328i [0.00] 2009 328i [0.00]	I'm listening.

02-28-2011, 09:15 PM	#19
ZweiTurbos New Member Drives: '07 e90 335i Sport AW // TD Join Date: Jun 2009 Location: Maryland Posts: 15 iTrader: (0)	Definitely interested!

03-02-2011, 06:20 AM	#22
irq5 Drives: e90 335i, M-Sport, Step, JB+ Join Date: Mar 2008 Location: Johannesburg, SA Posts: 374 iTrader: (0) Garage List 2008 335i Sedan [0.00]	Hey All I'm currently working on a diffuser for the 335 m-tech rear - I'm really keen in developing something that will fit the stock rear though based on the interest shown here. I'm going to find a development mule in my area and see what I can do to get something out quite quickly (quickly being relative - it will take around 6 months) I'd have to look at making a few options available: 335 vs. non 335 335: Dual / Quad openings non 335: Similar story - opening on the left or both? Give me some ideas / comments and I'll see how quickly I can get started on this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search