Newbie Question, 3stage intake manifold swap. - BMW 3-Series (E90 E92) Forum

JayP · 04-25-2011, 05:41 PM

This is about the 330 conversion on a 325.

Ok, iv'e red about every topic on it.

There s a few things i am still comfused about....

Do i need a brand new 330 Ecu or can i just reprogram the one i have already? Once i get the new ecu / reprogram, can i get a tune for it ?
Can i do both of these step at once? Just tune my ecu as a tuned 330 software?

Once i swap the parts in my garage, i have to run down to my performance shop or the dealership to get my ecu programmed and then everything's fine?

If i have to get a new Ecu, anyone has the part number ?

Any help is appreciated !
Thanks

mike-y · 04-25-2011, 06:12 PM

you flash your own computer with the 3-stage software. Active Autowerk has a tune for the 3-stage manifold. You'd need to go to their nearest rep (check their website), or send your computer to them.

e90pilot · 04-25-2011, 06:44 PM

The 330 and 325 ecus actually have identical part numbers. The software from AA works really well with a large increase in torque and mid range and a good increase in top end HP. However, someone here named allmotor discovered that there are still some missing files that need to be modified to get the full benefit of the 330's increased valve lift. I haven't contacted AA about this but I'm sure they'd be more than willing to look into it. This ECU is quite complicated but it's extreamly powerful. As is, the AA tune is still VERY good though. Smooth power delivery, good throttle response, very refined.

tamster00 · 04-26-2011, 02:39 AM

Quote:

Originally Posted by e90pilot

The 330 and 325 ecus actually have identical part numbers. The software from AA works really well with a large increase in torque and mid range and a good increase in top end HP. However, someone here named allmotor discovered that there are still some missing files that need to be modified to get the full benefit of the 330's increased valve lift. I haven't contacted AA about this but I'm sure they'd be more than willing to look into it. This ECU is quite complicated but it's extreamly powerful. As is, the AA tune is still VERY good though. Smooth power delivery, good throttle response, very refined.

Hey e90pilot, was wondering, where did you get your AA tune at?

e90pilot · 04-26-2011, 02:43 AM

I pm'ed viral. He helped me get in touch with a dealer here in the SF Bay Area called JLeviSW. They're also a forum sponsor here.

tamster00 · 04-26-2011, 03:37 AM

Cool, thanks!

04-25-2011, 05:41 PM	#1
JayP Private Drives: 335 LCI Xdrive Join Date: Aug 2010 Location: Quebec, Canada Posts: 79 iTrader: (0)	Newbie Question, 3stage intake manifold swap. This is about the 330 conversion on a 325. Ok, iv'e red about every topic on it. There s a few things i am still comfused about.... Do i need a brand new 330 Ecu or can i just reprogram the one i have already? Once i get the new ecu / reprogram, can i get a tune for it ? Can i do both of these step at once? Just tune my ecu as a tuned 330 software? Once i swap the parts in my garage, i have to run down to my performance shop or the dealership to get my ecu programmed and then everything's fine? If i have to get a new Ecu, anyone has the part number ? Any help is appreciated ! Thanks
	Tweet

04-25-2011, 06:44 PM	#3
e90pilot Freight Dawg Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA Posts: 1,952 iTrader: (3)	The 330 and 325 ecus actually have identical part numbers. The software from AA works really well with a large increase in torque and mid range and a good increase in top end HP. However, someone here named allmotor discovered that there are still some missing files that need to be modified to get the full benefit of the 330's increased valve lift. I haven't contacted AA about this but I'm sure they'd be more than willing to look into it. This ECU is quite complicated but it's extreamly powerful. As is, the AA tune is still VERY good though. Smooth power delivery, good throttle response, very refined. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Racing Brake 2-piece rotors Click here for review!

04-26-2011, 02:43 AM	#5
e90pilot Freight Dawg Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA Posts: 1,952 iTrader: (3)	I pm'ed viral. He helped me get in touch with a dealer here in the SF Bay Area called JLeviSW. They're also a forum sponsor here. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Racing Brake 2-piece rotors Click here for review!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-25-2011, 06:12 PM	#2
mike-y just another bmw douche bag Drives: 1.9L of fury Join Date: Nov 2008 Location: Los Angeles, CA Posts: 2,795 iTrader: (4)	you flash your own computer with the 3-stage software. Active Autowerk has a tune for the 3-stage manifold. You'd need to go to their nearest rep (check their website), or send your computer to them.

04-26-2011, 03:37 AM	#6
tamster00 Uhh, Hi =) Drives: 11' E90 335i, 12' Fit Sport Join Date: Apr 2011 Location: Daly City Posts: 279 iTrader: (2)	Cool, thanks!